ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Additive manufacturing multi-material components of SAF 2507 duplex steel and 15-5 PH martensitic stainless steel [Elektronski vir]Koukolíková, Martina ...The study reports the successful deposition of 15–5 precipitation-hardened (PH) martensitic steel on SAF 2507 duplex stainless steel (and vice versa) to form functionally graded materials (FGMs) ... using powder-based, directed-energy-deposition (DED) technology. The evolution of the microstructure and the mechanical properties of the 15–5 PH/SAF 2507 functionally graded material in the as-built state were investigated systematically. The results proved that the microstructural transition zone (MTZ) is formed above the fusion line due to the dilution effect of both steels. The phase composition of the MTZ consists of ferrite and, in comparison to the base materials, an increased amount of austenite. The interface has the lowest hardness owing to the formation of a significant proportion of the austenitic phase. However, the tensile mechanical properties were not affected by the interface as failure occurred in both SAF 2507 and at the interface regions. The research presents a promising application of FGMs in a horizontal configuration to form a high - quality, metallurgical joint between heterogeneous materials. This study introduces a novel approach by additive manufacturing (AM) of heterogeneous multi-materials, merging the favorable properties of duplex SAF 2507 and martensitic 15-5 PH stainless steels through superior metallurgical bonding. The combination of SAF 2507 and 15-5 PH in a functionally graded material has not been previously explored, as the existing studies deal with the duplex stainless steels SAF 2507 and either martensitic stainless-steel 15-5 PH deposited separately by laser powder-bed-fusion (L-PBF) or DED methods. This research pioneers the investigation of these materials in tandem, paving the way for the development of novel FGMs with optimized properties for specific applications. The resulting FGM exhibits exceptional corrosion resistance and high strength, making it highly versatile for applications in diverse industries such as offshore oil and gas production, aerospace, aviation, and chemical processing equipment.Source: Journal of manufacturing processes [Elektronski vir]. - ISSN 2212-4616 (Vol. 102, Jul. 2023, str. 330-339)Type of material - e-article ; adult, seriousPublish date - 2023Language - englishCOBISS.SI-ID - 161196291
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Author | Koukolíková, Martina ... |
Title | Additive manufacturing multi-material components of SAF 2507 duplex steel and 15-5 PH martensitic stainless steel [Elektronski vir] |
Publication date | 2023-07-27 |
COBISS.SI-ID | 161196291 |
Publication version in repository | Postprint, author's finally reviewed version, accepted for publication |
Publication licence | Unidentified |
Embargo | Permanently closed access to full-text; metadata is visible |
Project(s) from which the publication was funded
Title | Acronym | Project ID | Funder |
---|---|---|---|
Fizika in kemija površin kovinskih materialov | P2-0132-2019 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Razvoj naprednih Ti6Al4V komponent rezervoarja za letalsko industrijo s hibridno SLM/DED dodajno tehnologijo | L2-4445-2022 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Research of advanced steels with unique properties | CZ02.1.01/0.0/0.0/16_019/0000836 |
European Regional Development Fund European Commission |
Files that belong to the publication
Link |
---|
![]() |
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Koukolíková, Martina | ![]() |
Podaný, Pavel | ![]() |
Rzepa, Sylwia | ![]() |
Brázda, Michal | ![]() |
Kocijan, Aleksandra | 18475 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: