ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Thermal modelling of ITER first wall [Elektronski vir]Brank, Matic ...The ITER tokamak is designed to produce fusion grade plasmas for durations of hundreds to thousands of seconds. These long durations require active cooling of the wall armour directly facing the ... plasma. Such actively cooled plasma-facing components (PFCs) have strict limits on the allowed stationary surface heat flux densities in order to avoid critical heat fluxes at interfaces with the cooling channels. These flux densities are lower for the beryllium (Be) main chamber PFCs than for the tungsten divertor targets and must be carefully monitored from the beginning of ITER operations, when the Be first wall panels (FWP), notably in the inboard equatorial region, will be used for plasma start-up. It is thus extremely important to provide assessments of likely heat loading and thermal transfer within the Be armour for incorporation into real time plasma control algorithms. This article describes a new module in the SMITER magnetic field line following code framework [1] for finite element calculations of thermal transfer in FWPs subject to heat flux distributions on the front surface computed by SMITER. The heat fluxes are mapped onto a 3D model of the panel subcomponents, comprising, for each FWP, a series of poloidally stacked “fingers”, each of which is made up of a cooled substrate, to which are bonded individual Be tiles. The ITER FWPs come in two variants: Enhanced (EHF) and Normal (NHF) panels. Models for both are included in the SMITER thermal module. Computation of static temperatures on the FWP surface is performed using the open source FEM package ELMER [2], which is embedded in the SMITER GUI environment. For selected EHF FWPs, where plasma-wall interactions are expected to be highest, the full Be tile castellation geometry is included in the CAD model, yielding a computationally heavy task for field line tracing and thermal transfer, but providing a much higher fidelity representation of the surface temperature distribution than obtained with the standard smooth surface profile used for most heat flux distribution estimates. The GEOM module, also part of SMITER GUI environment and having an extensive library for Python scripting, is used to prepare CAD models for the structures below the Be castellations. Meshing of the models is performed with SMESH, a further module embedded in the SMITER GUI. A full tutorial from CAD modelling and meshing to temperature calculation is presented in this article together with the result of some benchmarking of the new framework against specific existing thermal calculations provided by the ITER Organization.Type of material - conference contribution ; adult, seriousPublish date - 2019Language - englishCOBISS.SI-ID - 179876867
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Brank, Matic | 53102 |
Kos, Leon, 1966- | 12725 |
Pitts, Richard | ![]() |
Simič, Gregor | ![]() |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: