-
Preliminary in-plane shear test of infills protected by PUFJ interfacesAkyildiz, Ahmet Tugrul ...This paper presents results of in-plane shear tests carried out in ZAG laboratory in Ljubljana (Slovenia) on an RC frame with masonry infill made of clay blocks (KEBE OrthoBlock). The frame fixed at ... the bottom and loaded vertically at columns% tops was excited by horizontal quasi-static cyclic loads at the top beam level. These loads forced various and gradually increasing drift levels (positive and negative) of the frame, with 3 repetitions at each level. Acquired forces and measured displacements allowed drawing hysteresis loops for determination of dissipation energy. Additionally, Digital Image Correlation (DIC) system was used for visualization of the behavior of the frame and the infill. There were tested 3 infill specimens of different configurations at interfaces between RC frame and infills. Type A (reference) was made of the infill bonded classically to the RC frame by mineral mortar. In type B, spaces at sides and top interfaces of 2 cm thickness were cut by saw and filled by polyurethane injection making PolyUrethane Flexible Joints (PUFJ). In type C, all interfaces were constructed from prefabricated PUFJ laminates and then the infill was erected. The specimen A was forced up to 1.6% of the frame horizontal drift when initial crushing at the corners and complete detachment at the frame-infill interface occurred. At this stage, the infill A could collapse even with small out-of-plane forces. The specimen B and C were forced up to 3.5% and 4.4% of the frame horizontal drift, respectively. B and C infills suffered crushing at the corners but the PUFJ interface protected the damaged infills against out-of-plain failure.Source: Brick and block masonry - from historical to sustainable masonry (Str. 968-975)Type of material - conference contribution ; adult, seriousPublish date - 2020Language - englishCOBISS.SI-ID - 23589379
Author
Akyildiz, Ahmet Tugrul |
Kwiecień, Arkadiusz |
Zając, BogusŁaw |
Triller, Petra |
Bohinc, Uroš |
Rousakis, Theodoros |
Viskovic, Alberto
Topics
a.b. okviri z zidnimi polnili |
laboratorijsko preizkuševanje |
stiki iz fleksibilnih polimerov |
optični merilni sistem |
r.c. frames with infills |
laboratory testing |
polyurethane flexible joints |
optical measurements
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Akyildiz, Ahmet Tugrul | ![]() |
Kwiecień, Arkadiusz | ![]() |
Zając, BogusŁaw | ![]() |
Triller, Petra | 37502 |
Bohinc, Uroš | 20631 |
Rousakis, Theodoros | ![]() |
Viskovic, Alberto | ![]() |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.