-
Advances in the understanding of the annular laser beam wire cladding processKotar, Matjaž ...This paper experimentally studies the influence of conventional process parameters (laser beam power, P, workpiece, and wire feeding velocities), and the nominal workpiece irradiation proportion WIPN ... parameter, on ALB-WC process stability and generated clad geometry. The study was based on an extensive set of single clad experiments using stainless steel AISI 316L wire of 0.6 mm diameter and a stainless steel AISI 304 workpiece. The results show that the laser beam power required for a stable process increases non-linearly with WIPN, and this relationship can be described by quadratic regression. An increase in either the workpiece or wire feeding velocity respectively causes a reduction or enlargement of the stability region in the P-WIPN stability diagrams. The influences on stability diagrams are explained by means of the increase in the nominal WIPN to the effective WIPE, as a result of the clad height generated. With respect to clad geometry, it was shown that an increase in the WIPN causes a decrease in the dilution ratio, which is linearly correlated with the workpiece and melt pool temperatures, while clad width and height are not influenced by the WIPN. The paper further explains the complex influences of the process parameters observed on process stability and generated clad geometry using a phenomenological description of the ALB-WC process at a low and high nominal WIPN. For this purpose, heat transfer, Marangoni flow, and laser beam reflections are considered qualitatively and supported by IR and visual images of the wire-end and melt pool as well as the workpiece and melt pool temperatures.Source: Journal of materials processing technology. - ISSN 0924-0136 (Vol. 294, Aug. 2021, str. 1-12)Type of material - article, component partPublish date - 2021Language - englishCOBISS.SI-ID - 52257539
Author
Kotar, Matjaž |
Fujishima, Makoto |
Levy, Gideon N. |
Govekar, Edvard
Topics
annular laser beam |
laser wire cladding |
nominal workpiece irradiation proportion |
process stability |
clad geometry |
melt pool and workpiece temperature |
anularni laserski žarek |
lasersko nanašanje žice |
imenski delež osvetljevanja obdelovanca |
stabilnost procesa |
geometrija nanosa |
temperatura talilnega bazena in obdelovanca
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kotar, Matjaž | 38155 |
Fujishima, Makoto | |
Levy, Gideon N. | |
Govekar, Edvard | 08782 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.