ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Microstructural evaluation of rapidly solidified Al-7Cr melt spun ribbons = Ovrednotenje mikrostrukture hitrostrjenih trakov Al-7CrJurči, Peter ...The use of conventional bulk materials is limited by segregation phenomena, which are generated during the solidification and cannot be eliminated in the solid state. The introduction of ... rapid-solidification technology (RST) into material processing overcame some of the problem of unacceptable material quality and broadened the range of materials that it is possible to fabricate. The use of conventional ingot metallurgy for the fabrication of aluminium alloys containing a large amount of elements with a low diffusion coefficient is impossible because coarse, hard and brittle intermetallics are formed and the alloys have poor mechanical properties. The use of RST makes it possible to produce these alloys with an improved microstructure; however, before industrial production the structure and properties of the rapidly solidified semi-products as well as the consolidated bulk product must be evaluated systematically. In this paper, melt-spun ribbons, made under various conditions from a binary Al-7%Cr, alloy are investigated. The structure consisted of a supersaturated Al solid solution with a high dislocation density, precipitates of chromium-rich phases and rosette-like spherolites formed from the Al solid solution and the Al[sub](7)Cr intermetallic phase. The type of phases is related to the processing conditions in only a very limited waySource: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 41, št. 6, 2007, str. 283-287)Type of material - article, component partPublish date - 2007Language - englishCOBISS.SI-ID - 640426
source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 41, št. 6, 2007, str. 283-287)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Jurči, Peter | |
Dománková, Mária | |
Hudáková, Mária | |
Šuštaršič, Borivoj | 08195 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: