-
Effects of selected printing parameters on the fire properties of 3D-printed neat polylactic acid (PLA) and wood/PLA composites [Elektronski vir]Knez, Nataša, 1970- ...The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid (PLA) and wood/PLA filaments were investigated. The reaction to fire of ... the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method. The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament. It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens. Time to ignition was found to be much longer in the 3D-printed PLA specimens. Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens, the duration of HRR was longer for the wood/PLA specimens. The initial mass of the specimens was smaller in the wood/PLA composites, but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.Source: Journal of renewable materials. - ISSN 2164-6341 (Vol. 9, no. 11, May 2021, str. 1883-1895)Type of material - e-article ; adult, seriousPublish date - 2021Language - englishCOBISS.SI-ID - 64464899
Author
Knez, Nataša, 1970- |
Kariž, Mirko |
Knez, Friderik |
Ayrilmis, Nadir |
Kitek Kuzman, Manja
Topics
protipožarna odpornost |
les |
polilaktična kislina (PLA) |
filament |
3D tiskalnik |
biokompozit |
odprti dostop |
reaction to fire |
wood |
polylactic acid (PLA) |
filament |
3D printer |
biocomposite |
open access
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Author | Knez, Nataša, 1970- ... |
Title | Effects of selected printing parameters on the fire properties of 3D-printed neat polylactic acid (PLA) and wood/PLA composites [Elektronski vir] |
Publication date | 2021-05-25 |
COBISS.SI-ID | 64464899 |
Publication version in repository | Publisher's version |
Publication licence | Creative Commons Attribution 4.0 International |
Embargo | Immediate publication for public |
Project(s) from which the publication was funded
Title | Acronym | Project ID | Funder |
---|---|---|---|
Les in lignocelulozni kompoziti | P4-0015-2020 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Study on the functional properties and thermal safety performance of wood materials and adhesives for 3D printing technology | BI-CN/18-20-016 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
Files that belong to the publication
Link |
---|
![]() |
![]() |
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Knez, Nataša, 1970- | 14926 |
Kariž, Mirko | 29227 |
Knez, Friderik | 14943 |
Ayrilmis, Nadir | ![]() |
Kitek Kuzman, Manja | 20385 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.