-
Experimental and numerical analysis of laminated carbon fibre-reinforced polymer gears with implicit model for coefficient-of-friction evaluation [Elektronski vir]Černe, Borut, 1989- ...Laminated composites have so far received little attention as a potential material for gear drive applications. In the presented study, the thermomechanical performance of a newly developed type of ... epoxy impregnated, autoclave-cured carbon fibre-reinforced polymer gear-running in pair with a steel pinion-was analysed, using a combination of experimental and numerical approaches. The employed methods enabled the identification of the composite’s mechanical, thermal, and tribological characteristics, as related to the studied gear pair application. A newly proposed, finite-element-analysis-based iterative procedure enabled an implicit evaluation of the analysed material pair’s coefficient of friction (COF), which is a key parameter in determining the gear pair’s thermomechanical characteristics. For the considered material pair, a value of 0.34 was identified for the coefficient in the quasi-steady region. As the coefficient is strongly correlated with frictional heat generation and significantly affects the surface shear stress, it can consequently have a meaningful influence on the composite’s wear rate. The developed COF identification procedure was validated using a reciprocating cylinder-on-flat tribological test method. The composite gear’s service life was additionally tested at various running loads, resulting in pitch contact pressures ranging between 400 and 540 MPa. Lifetime gear test results showed a markedly superior performance compared to the high-temperature thermoplastic polyether ether ketone, which is typically employed in the most demanding polymer gear applications. Several methods are additionally proposed that could further improve the developed composite gears’ performance.Source: Journal of computational design and engineering [Elektronski vir]. - ISSN 2288-5048 (Vol. 9, iss. 1, Feb. 2022, str. 246-262)Type of material - e-article ; adult, seriousPublish date - 2022Language - englishCOBISS.SI-ID - 96943363
Author
Černe, Borut, 1989- |
Bergant, Zoran |
Šturm, Roman, 1965- |
Tavčar, Jože, 1966- |
Zorko, Damijan
Topics
carbon fibre |
thermomechanical analysis |
finite element method |
mechanical testing |
composites |
autoclave |
ogljikova vlakna |
termo mehanska analiza |
metoda končnih elementov |
mehansko preizkušanje |
kompoziti |
avtoklav
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Černe, Borut, 1989- | 37664 |
Bergant, Zoran | 26556 |
Šturm, Roman, 1965- | 13026 |
Tavčar, Jože, 1966- | 11664 |
Zorko, Damijan | 36764 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.