-
Wear behaviour of deep-cryogenic treated high-speed steels at different loadsKalin, Mitjan ; Leskovšek, Vojteh ; Vižintin, JožeTools for the cold-working applications are typically made from the high-speed steels. However, due to wear and plastic deformation their performance in several applications is not adequate and ... should be further improved. By using appropriate combination of vacuum heat-treatment in conjunction with a deep-cryogenic treatment (duplex treatment) the microstructure of high-speed steel matrix can be substantially changed and the hardness and fracture toughness can be modified and optimised. In the present work we have investigated the effect of four different tempering temperatures of vacuum and cryogenically treated ESR AISI M2 high-speed steel on the resulting combinations of microstructure, hardness and toughness and their effect on the wear mechanisms at different loads. The results showed that at relatively high loads the different treatments resulted in an order-of-magnitude difference of wear resistance, while at low loads the selected treatments were efficient enough to keep the wear within the mild wear regime and small variations between the samples. However, the overall wear transition did not occur at any load used or any sample treatment, although some small differences in wear mechanisms can be seen, primarily depending on the fracture toughness of the samples.Source: Materials and manufacturing processes. - ISSN 1042-6914 (Letn. 21, št. 8, 2006, str. 741-746)Type of material - article, component partPublish date - 2006Language - englishCOBISS.SI-ID - 9672219
Author
Kalin, Mitjan |
Leskovšek, Vojteh |
Vižintin, Jože
Topics
nizkotemperaturne obdelave |
Duplex postopki |
lomna žilavost |
trenje |
trdota |
visokohitrostna jekla |
obremenitve |
mikrostrukture |
plastična deformacija |
tribologija |
obraba |
cryogenic treatment |
deep-cryogenic treatment |
Duplex treatment |
fracture toughness |
friction |
hardness |
high-speed steel |
load |
microstructure |
wear |
plastic deformation |
tribology
source: Materials and manufacturing processes. - ISSN 1042-6914 (Letn. 21, št. 8, 2006, str. 741-746)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kalin, Mitjan | 14556 |
Leskovšek, Vojteh | 07642 |
Vižintin, Jože | 00812 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.