National and University Library, Ljubljana (NUK)
-
Investigating the effects of cutting parameters on the hole quality in drilling the Ti-6Al-4V alloy = Preiskava vpliva parametrov rezanja na kvaliteto izvrtine, izvrtane v zlitino Ti-6Al-4VÇelik, Yahya HişmanIn this study, the effects of cutting parameters on the surface roughness, burr height, hole-diameter deviation, cutting temperature and structure of a chip formation were investigated during the ... drilling of the Ti-6Al-4V alloy. For this purpose, the Ti-6Al-4V alloy was drilled at different cutting parameters, longitudinally in the 10 mm depth with Ř = 10 mm high-speed-steel (HSS) drills, having 90°, 118°, 130° and 140° point angles on the CNC vertical machining centre. Experiments were carried out at the (12.5, 18.75 and 25) m/min cutting speeds and the (0.05, 0.1 and 0.15) mm/r feed rates without using the cutting fluid. As a result, as the feed rate and the drill-point angle were increased, the surface roughness increased as well; however, as the cutting speed increased, the surface roughness decreased. When the feed rate and drill-point angle increased, the burr height decreased. On the other hand, an increase in the cutting speed increased the burr height. In general, an increase in the feed rate and drill-point angle increased the hole diameters, and the hole diameters obtained were close to the nominal size when the cutting speed was increased.Source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-okt. 2014, str. 653-659)Type of material - article, component part ; adult, seriousPublish date - 2014Language - englishCOBISS.SI-ID - 1083562
Author
Çelik, Yahya Hişman
Topics
titanove zlitine |
aluminijeve zlitine |
vrtanje |
izvrtina |
hrapavost površine
source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 5, sep.-okt. 2014, str. 653-659)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Çelik, Yahya Hişman |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi