National and University Library, Ljubljana (NUK)
-
Fracture toughness of the vacuum-heat-treated spring steel 51CrV4 = Lomna žilavost vakuumsko toplotno obdelanega vzmetnega jekla 51CrV4Senčič, Bojan ; Leskovšek, VojtehIn the work the possibilities of the vacuum heat treatment of spring steel grade 51CrV4 are presented. Charpy-V notch (CVN) impact-test values are widely used in toughness specifications for spring ... steels, even though the fracturing energy is not directly related to the spring design. The plain-strain stress-intensity factor (KIc) at the on set of unstable crack growth can be related to the spring design; however, KIc values are not used in the toughness specifications. This is surprising since to the designer KIc values are more useful than CVN values, because the design calculations for springs from high-strength steels should also take into account the strength and the toughness of materials to prevent rapid and brittle fracture. An investigation was conducted to determine whether standardized fracture-toughness testing (ASTM E399-90), which is difficult to perform reliably for hard and low ductility materials, could be replaced with a non-standard testing method using circumferentially notched and fatigue-precracked tensile specimens. The results of this investigation have shown that using the proposed method it was possible to draw, for the normally used range of working hardness, combined tempering diagrams (Rockwell-C hardness - Fracture toughness KIc - Tempering temperature) for the vacuum-heat-treated spring steel grade 51CrV4. Fractographic and metallographic analyses of the KIc-test specimens used shows in steel the presence of positive and negative segregations. It was found that the width of the segregations bands and the distance between the positive and negative segregations influence significantly the fracture toughness due to the presence of bainite in the negative segregations.Source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 1, jan.-feb. 2011, str. 67-73)Type of material - article, component partPublish date - 2011Language - englishCOBISS.SI-ID - 851370
Author
Senčič, Bojan |
Leskovšek, Vojteh
Topics
vzmetno jeklo |
vakuumska toplotna obdelava |
trdota |
lomna žilavost |
mikrostruktura
source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 1, jan.-feb. 2011, str. 67-73)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Senčič, Bojan | 18782 |
Leskovšek, Vojteh | 07642 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi