The accuracy of an automated quantitative analysis of same-day rest/stress 99mTc sestamibi SPECT images for detection and localization of coronary artery disease (CAD) was assessed in a multicenter ...trial consisting of 161 patients from 7 different clinical sites utilizing various camera computer systems.
Of the 161 patients, 102 had angiographically documented coronary artery disease, 22 had normal coronary arteriograms, and 37 had a low (< 5%) likelihood of coronary artery disease based on their age, sex, symptoms and the results of their exercise electrocardiograms. The patients were studied using previously optimized image acquisition and processing protocols. An additional population consisting of 45 patients with single-vessel disease were evaluated to determine the optimal criteria for detection of CAD.
The quantitative analysis method was associated with an overall sensitivity of 87%, specificity of 36%, and normalcy rate (true negative rate in the low likelihood patients) of 81%. Sensitivity for overall detection of disease was similar (90%) in patients with and without myocardial infarction (90% versus 89%). The sensitivities and specificities for identification of disease in individual coronary arteries were, respectively, 69% and 76% for LAD, 70% and 80% for LCX, and 77% and 85% for RCA.
The results of this study demonstrate that the new objective quantitative method for analysis of same-day rest/stress 99mTc sestamibi SPECT images is accurate for detection and localization of CAD and correlates highly with expert visual interpretation.
Most reports to date using single photon emission computed tomography (SPECT) with technetium-99m (Tc-99m) sestamibi have used acquisition parameters that were optimized for thallium-201. To fully ...utilize the superior imaging characteristics of Tc-99m sestamibi, there is a need to optimize the technical aspects of SPECT imaging for this agent. Performance can be enhanced through the careful selection of optimal radiopharmaceutical doses, imaging sequences, acquisition parameters, reconstruction filters, perfusion quantification methods and multidimensional methods for visualizing perfusion distribution. The current report describes theoretical considerations, phantom studies and preliminary patient results that have led to optimized protocols, developed at Emory University and Cedars-Sinai Medical Center, for same-day rest-stress studies, given existing instrumentation and recommended dose limits. The optimizations were designed to fit a low-dose-high-dose rest-stress same-day imaging protocol. A principal change in the acquisition parameters compared with previous Tc-99m sestamibi protocols is the use of a high-resolution collimator. The approach is being developed in both prone and supine positions. A new method for extracting a 3-dimensional myocardial count distribution has been developed that uses spherical coordinates to sample the apical region and cylindrical coordinates to sample the rest of the myocardium. New methods for visualizing the myocardial distribution in multiple dimensions are also described, with improved 2-dimensional, as well as 3- and 4-dimensional (3 dimensions plus time) displays. In the improved 2-dimensional display, distance-weighted and volume-weighted polar maps are used that appear to significantly improve the representation of defect location and defect extent, respectively.
The accuracy of the previously developed and validated Cedars-Sinai Medical Center (CSMC) computer program for quantitative analysis of thallium-201 (201TI) stress myocardial tomograms was assessed ...in a multicenter trial consisting of 242 patients with coronary angiography and 76 with a low likelihood (LL) of coronary artery disease (CAD) involving various cameras, computers, and operators. The program utilized gender-matched normal limits developed from 35 LL patients at CSMC. The multicenter results as compared to those of 168 patients from CSMC were not significantly different with respect to the overall sensitivities (94% versus 95%) and specificities (44% versus 56%) for identification of CAD and normalcy rates which were determined in LL patients (82% for both) and with respect to identification of individual diseased arteries. The results indicate that our method for quantifying tomographic 201TI stress scintigrams utilizing standard normal limits can be applied at other institutions by different operators, using a variety of cameras and computers, with similar accuracy to that currently obtained at our institution.
A comprehensive method is described for quantification of the relative 3-dimensional distribution of Tl-201 in the myocardium, following stress and subsequent washout. The method uses maximal-count ...circumferential profiles of well-defined long- and short-axis tomograms to determine the 3-dimensional distribution of Tl-201; it then maps this distribution onto a 2-dimensional polar representation. Abnormal thallium distribution or washout is identified by automatic computer comparison of each patient's profile with the corresponding lower limits of normal profiles. Abnormality is expressed as a percentage of the entire myocardium by use of polar maps for extent and severity. The binary extent map expresses the degree of abnormality. Preliminary criteria for abnormality were derived from the tomographic results of 25 normals and 28 patients with documented coronary artery disease. The results were normal in 23 of the 25 normals and were abnormal in 25 of the 28 CAD patients. In addition, the computer output correctly localized the presence or absence of disease in 46 of 56 coronary circulations.
We examined the relationships of automatic quantitative perfusion defect size and defect severity to rest left ventricular ejection fraction and semiquantitative visual sestamibi defect size in rest ...99mTc-sestamibi SPECT in 40 consecutive patients with a history of myocardial infarction more than 30 days prior to testing. The purpose of this investigation was to validate the use of automatic quantitative rest sestamibi SPECT as a clinical measure of assessing relative infarction size.
All patients received 20-30 mCi of 99mTc-sestamibi followed by SPECT imaging. Quantitative defect analysis used previously developed resting normal limits and an automatic version of a commercially available quantitative program (CEqual). Semiquantitative visual defect interpretation used a 20 segment/scan and five-point scoring analysis. First-pass (FP) radionuclide ventriculography (RVG) and gated sestamibi perfusion SPECT were each performed in 31 patients.
LVEF assessed by FP RVG was 37% +/- 15% (range 14%-62%) and 37% +/- 16% (range 12%-63%) by gated perfusion SPECT with high linear correlation (r = 0.96, n = 22) between the two methods. Myocardial perfusion defect size was 24% +/- 15% of LV (range 0%-50%) and defect severity was 1103 +/- 864 (range 0 to 2825) by automatic quantitative rest sestamibi. Perfusion defect size and defect severity both had close correlations with LVEF by FP RVG (r = -0.78, r = -0.86) and by gated perfusion SPECT (r = -0.75, r = -0.79). High linear correlations were observed between quantitative defect size and summed visual score of segments with score > or = 2 (r = 0.82) and the number of visually abnormal segments (r = 0.77), as well as between defect severity and visual summed rest score (r = 0.86) and the number of visually abnormal segments (r = 0.76).
Quantitation of rest sestamibi SPECT defect extent and severity using automatic CEqual correlates well with rest LVEF and with semiquantitative expert visual analysis. Results of this study define a strong relationship between measurements of 99mTc-sestamibi perfusion defect as measured by an automatic software program and global left ventricular function. The automatic quantitative program appears to be a useful measure of assessing infarct size in patients with remote myocardial infarction.
Gravitational-wave observatories around the world, including the Laser Interferometer Gravitational-wave Observatory (LIGO), record a large volume of gravitational-wave output data and auxiliary data ...about the instruments and their environments. These data are stored at the observatory sites and distributed to computing clusters for data analysis. LigoDV-web is a web-based data viewer that provides access to data recorded at the LIGO Hanford, LIGO Livingston and GEO600 observatories, and the 40m prototype interferometer at Caltech. The challenge addressed by this project is to provide meaningful visualizations of small data sets to anyone in the collaboration in a fast, secure and reliable manner with minimal software, hardware and training required of the end users. LigoDV-web is implemented as a Java Enterprise Application, with Shibboleth Single Sign On for authentication and authorization and a proprietary network protocol used for data access on the back end. Collaboration members with proper credentials can request data be displayed in any of several general formats from any Internet appliance that supports a modern browser with Javascript and minimal HTML5 support, including personal computers, smartphones, and tablets. To date 634 unique users have visited the LigoDV-web website in a total of 33,861 sessions and generated a total of 139,875 plots. This infrastructure has been helpful in many analyses within the collaboration including follow-up of the data surrounding the first gravitational-wave events observed by LIGO in 2015.
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses ...from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.