Ordering of interfacial water at the hematite and corundum (0
0
1)–water interfaces has been characterized using in situ high resolution specular X-ray reflectivity measurements. The hematite (0
0
1) ...surface was prepared through an annealing process to produce a surface isostructural with corundum (0
0
1), facilitating direct comparison. Interfacial water was found to display a similar structure on this pair of isostructural surfaces. A single layer of adsorbed water having a large vibrational amplitude was present on each surface and additional ordering of water extended at least 1
nm into the bulk fluid, with the degree of ordering decreasing with increasing distance from the surfaces. Consistent with prior studies of the (0
1
2) and (1
1
0) surfaces of hematite and corundum, the configuration of water above the (0
0
1) surfaces is primarily controlled by the surface structure, specifically the arrangement of surface functional groups. However, interfacial water at the (0
0
1) surfaces displayed significantly larger vibrational amplitudes throughout the interfacial region than at other isostructural sets of hematite and corundum surfaces, indicating weaker ordering. Comparison of the vibrational amplitudes of adsorbed water on a series of oxide, silicate, and phosphate mineral surfaces suggests that the presence or absence of a substantial interfacial electrostatic field is the primary control on water ordering and not the surface structure itself. On surfaces for which charge originates dominantly through protonation–deprotonation reactions the controlling factor appears to be whether conditions exist where most functional groups are uncharged as opposed to the net surface charge. The doubly coordinated functional groups on hematite and corundum (0
0
1) surfaces are largely uncharged under slightly acidic to circumneutral pH conditions, leading to weak ordering, whereas singly coordinated groups on (0
1
2) and (1
1
0) surfaces of these phases are always charged, even when the net surface charge is zero, and induce strong water ordering. Surfaces lacking structural charge can thus be divided into two distinct classes that induce either strong or weak ordering of interfacial water. Surface functional group coordination is the ultimate control on this division as it determines the charge state of such groups under different protonation configurations. Ion adsorption and electron transfer processes may differ between these classes of surfaces because of the effect of water ordering strength on interfacial capacitances and hydrogen bonding.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Roughly one quarter of active upper limb prosthetic technology is rejected by the user, and user surveys have identified key areas requiring improvement: function, comfort, cost, durability, and ...appearance. Here we present the first systematic, clinical assessment of a novel prosthetic hand, the SoftHand Pro (SHP), in participants with transradial amputation and age-matched, limb-intact participants. The SHP is a robust and functional prosthetic hand that minimizes cost and weight using an underactuated design with a single motor. Participants with limb loss were evaluated on functional clinical measures before and after a 6-8 hour training period with the SHP as well as with their own prosthesis; limb-intact participants were tested only before and after SHP training. Participants with limb loss also evaluated their own prosthesis and the SHP (following training) using subjective questionnaires. Both objective and subjective results were positive and illuminated the strengths and weaknesses of the SHP. In particular, results pre-training show the SHP is easy to use, and significant improvement in the Activities Measure for Upper Limb Amputees in both groups following a 6-8 hour training highlights the ease of learning the unique features of the SHP (median improvement: 4.71 and 3.26 and p = 0.009 and 0.036 for limb loss and limb-intact groups, respectively). Further, we found no difference in performance compared to participant's own commercial devices in several clinical measures and found performance surpassing these devices on two functional tasks, buttoning a shirt and using a cell phone, suggesting a functional prosthetic design. Finally, improvements are needed in the SHP design and/or training in light of poor results in small object manipulation. Taken together, these results show the promise of the SHP, a flexible and adaptive prosthetic hand, and pave a path forward to ensuring higher functionality in future.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Widespread occurrences of phyllosilicates, predominantly nontronite and Mg saponite, in the Noachian‐aged crust of Mars place constraints on water availability and surface conditions. However, the ...Noachian atmosphere likely lacked oxidants capable of forming nontronite from the basaltic crust and its origins are thus uncertain. In this study, scenarios for the formation of iron‐bearing phyllosilicates from the weathering and hydrothermal alteration of Martian basalt were investigated using geochemical modeling to establish plausible pathways of nontronite generation and the effect of redox conditions on associated secondary phases. Hydrothermal alteration produced FeII and Mg saponite, serpentine, and zeolites at 100°C and chlorite, prehnite, and talc at 250°C, consistent with phases observed in crater deposits on Mars. Anoxic weathering produced primarily FeII and Mg saponite. High water‐rock ratios produced Al‐clays and amorphous silica and high pCO2 conditions inhibited smectite formation because of carbonate precipitation. Oxic weathering produced primarily nontronite and Mg saponite. Later oxidation of anoxic weathering products also formed nontronite‐Mg saponite assemblages; oxidation products of hydrothermal assemblages included nontronite, Mg saponite, and either Al smectites or residual zeolites or prehnite. These calculations demonstrate that there are multiple plausible routes to form Fe/Mg smectites on early Mars and that an oxidizing atmosphere need not have existed in the Noachian. Decoupling iron oxidation from initial clay formation raises the possibilities that Mars transitioned to conditions favoring widespread iron oxidation after phyllosilicate formation ceased and that residual, unoxidized ferrous iron phyllosilicates still exist today in the Martian subsurface.
Key Points
Multiple geochemically plausible routes exist for forming nontronite on Mars
Iron oxidation on Mars may have occurred later than phyllosilicate formation
Early Mars need not have had an oxidizing atmosphere
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
In this paper we introduce the Pisa/IIT SoftHand, a novel robot hand prototype designed with the purpose of being robust and easy to control as an industrial gripper, while exhibiting high grasping ...versatility and an aspect similar to that of the human hand. In the paper we briefly review the main theoretical tools used to enable such simplification, i.e. the neuroscience-based notion of soft synergies. A discussion of several possible actuation schemes shows that a straightforward implementation of the soft synergy idea in an effective design is not trivial. The approach proposed in this paper, called adaptive synergy, rests on ideas coming from underactuated hand design. A synthesis method to realize a desired set of soft synergies through the principled design of adaptive synergy is discussed. This approach leads to the design of hands accommodating in principle an arbitrary number of soft synergies, as demonstrated in grasping and manipulation simulations and experiments with a prototype. As a particular instance of application of the synthesis method of adaptive synergies, the Pisa/IIT SoftHand is described in detail. The hand has 19 joints, but only uses 1 actuator to activate its adaptive synergy. Of particular relevance in its design is the very soft and safe, yet powerful and extremely robust structure, obtained through the use of innovative articulations and ligaments replacing conventional joint design. The design and implementation of the prototype hand are shown and its effectiveness demonstrated through grasping experiments, reported also in multimedia extension.
Full text
Available for:
NUK, OILJ, SAZU, UKNU, UL, UM, UPUK
The mobility of hexavalent uranium in soil and groundwater is strongly governed by adsorption to mineral surfaces. As strong naturally occurring adsorbents, manganese oxides may significantly ...influence the fate and transport of uranium. Models for U(VI) adsorption over a broad range of chemical conditions can improve predictive capabilities for uranium transport in the subsurface. This study integrated batch experiments of U(VI) adsorption to synthetic and biogenic MnO2, surface complexation modeling, ζ-potential analysis, and molecular-scale characterization of adsorbed U(VI) with extended X-ray absorption fine structure (EXAFS) spectroscopy. The surface complexation model included inner-sphere monodentate and bidentate surface complexes and a ternary uranyl-carbonato surface complex, which was consistent with the EXAFS analysis. The model could successfully simulate adsorption results over a broad range of pH and dissolved inorganic carbon concentrations. U(VI) adsorption to synthetic δ-MnO2 appears to be stronger than to biogenic MnO2, and the differences in adsorption affinity and capacity are not associated with any substantial difference in U(VI) coordination.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
The potential for new U.S. regulations for Cr(VI) in drinking water have spurred strong interests in improving technologies for Cr(VI) removal. This study examined iron electrocoagulation for ...Cr(VI) removal at conditions directly relevant to drinking water treatment. Cr(VI) is chemically reduced to less soluble Cr(III) species by the Fe(II) produced from an iron anode, and XANES spectra indicate that the Cr is entirely Cr(III) in solid-phases produced in electrocoagulation. The dynamics of Cr(VI) removal in electrocoagulation at pH 6 and pH 8 at both oxic and anoxic conditions can be described by a new model that incorporates Fe(II) release from the anode and heterogeneous and homogeneous reduction of Cr(VI) by Fe(II). Heterogeneous Cr(VI) reduction by adsorbed Fe(II) was critical to interpreting Cr(VI) removal at pH 6, and the Fe- and Cr-containing EC product was found to catalyze the redox reaction. Dissolved oxygen (DO) did not observably inhibit Cr(VI) removal because Fe(II) reacts with DO more slowly than it does with Cr(VI), and Cr(VI) removal was faster at higher pH. Even in the presence of common groundwater solutes, iron electrocoagulation lowered Cr(VI) concentrations to levels well below California’s 10 μg/L.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Iron oxides are ubiquitous in soils and sediments and play a critical role in the geochemical distribution of trace elements and heavy metals via adsorption and coprecipitation. The presence of ...organic acids may potentially alter how metals associate with iron oxide minerals through a series of cooperative or competitive processes: solution complexation, ternary surface complexation, and surface site competition. The macroscopic and molecular-scale effects of these processes were investigated for Ni adsorption to hematite and goethite at pH 7 in the presence of oxalate. The addition of this organic acid suppresses Ni uptake on both minerals. Aqueous speciation suggests that this is dominantly the result of oxalate complexing and solubilizing Ni. Comparison of the Ni surface coverage to the concentration of free (uncomplexed) Ni2+ in solution suggests that the oxalate also alters Ni adsorption affinity. EXAFS and ATR-FTIR spectroscopies indicate that these changes in binding affinity are due to the formation of Ni–oxalate ternary surface complexes. These observations demonstrate that competition between dissolved oxalate and the mineral surface for Ni overwhelms the enhancement in adsorption associated with ternary complexation. Oxalate thus largely enhances Ni mobility, thereby increasing micronutrient bioavailability and inhibiting contaminant sequestration.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Variable stiffness actuators (VSAs) are complex mechatronic devices that are developed to build passively compliant, robust, and dexterous robots. Numerous different hardware designs have been ...developed in the past two decades to address various demands on their functionality. This review paper gives a guide to the design process from the analysis of the desired tasks identifying the relevant attributes and their influence on the selection of different components such as motors, sensors, and springs. The influence on the performance of different principles to generate the passive compliance and the variation of the stiffness are investigated. Furthermore, the design contradictions during the engineering process are explained in order to find the best suiting solution for the given purpose. With this in mind, the topics of output power, potential energy capacity, stiffness range, efficiency, and accuracy are discussed. Finally, the dependencies of control, models, sensor setup, and sensor quality are addressed.
Grasping an object is one of the most common and complex actions performed by humans. The human brain can adapt and update the grasp dynamics through information received from sensory feedback. ...Prosthetic hands can assist with the mechanical performance of grasping, however currently commercially available prostheses do not address the disruption of the sensory feedback loop. Providing feedback about a prosthetic hand's grasp force magnitude is a top priority for those with limb loss. This study tested a wearable haptic system, i.e., the Clenching Upper-Limb Force Feedback device (CUFF), which was integrated with a novel robotic hand (The SoftHand Pro). The SoftHand Pro was controlled with myoelectrics of the forearm muscles. Five participants with limb loss and nineteen able-bodied participants completed a constrained grasping task (with and without feedback) which required modulation of the grasp to reach a target force. This task was performed while depriving participants of incidental sensory sources (vision and hearing were significantly limited with glasses and headphones). The data were analyzed with Functional Principal Component Analysis (fPCA). CUFF feedback improved grasp precision for participants with limb loss who typically use body-powered prostheses as well as a sub-set of able-bodied participants. Further testing, that is more functional and allows participants to use all sensory sources, is needed to determine if CUFF feedback can accelerate mastery of myoelectric control or would benefit specific patient sub-groups.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The fate and transport of uranium in contaminated soils and sediments may be affected by adsorption onto the surface of minerals such as montmorillonite. Extended X-ray absorption fine structure ...(EXAFS) spectroscopy has been used to investigate the adsorption of uranyl (UO
2
2+) onto Wyoming montmorillonite. At low pH (∼4) and low ionic strength (10
−3 M), uranyl has an EXAFS spectrum indistinguishable from the aqueous uranyl cation, indicating binding via cation exchange. At near-neutral pH (∼7) and high ionic strength (1 M), the equatorial oxygen shell of uranyl is split, indicating inner-sphere binding to edge sites. Linear-combination fitting of the spectra of samples reacted under conditions where both types of binding are possible reveals that cation exchange at low ionic strengths on SWy-2 may be more important than predicted by past surface complexation models of U(VI) adsorption on related montmorillonites. Analysis of the binding site on the edges of montmorillonite suggests that U(VI) sorbs preferentially to Fe(O,OH)
6 octahedral sites over Al(O,OH)
6 sites. When bound to edge sites, U(VI) occurs as uranyl-carbonato ternary surface complexes in systems equilibrated with atmospheric CO
2. Polymeric surface complexes were not observed under any of the conditions studied. Current surface complexation models of uranyl sorption on clay minerals may need to be reevaluated to account for the possible increased importance of cation exchange reactions at low ionic strengths, the presence of reactive octahedral iron surface sites, and the formation of uranyl-carbonato ternary surface complexes. Considering the adsorption mechanisms observed in this study, future studies of U(VI) transport in the environment should consider how uranium retardation will be affected by changes in key solution parameters, such as pH, ionic strength, exchangeable cation composition, and the presence or absence of CO
2.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
PDF
