Machining processes remain an unavoidable technique in the production of high-precision parts. Tool behavior is of the utmost importance in machining productivity and costs. Tool performance can be ...assessed by the roughness left on the machined surfaces, as well as of the forces developed during the process. There are various techniques to determine these cutting forces, such as cutting force prediction or measurement, using dynamometers and other sensor systems. This technique has often been used by numerous researchers in this area. This paper aims to give a review of the different techniques and devices for measuring the forces developed for machining processes, allowing a quick perception of the advantages and limitations of each technique, through the literature research carried out, using recently published works.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Duplex stainless steels are being used on applications that require high corrosion resistance and excellent mechanical properties, such as the naval and oil-gas exploration industry. The components ...employed in these industries are usually obtained by machining; however, these alloys have low machinability when compared to conventional stainless steels, usually requiring the employment of tool coatings. In the present work, a comparative study of TiAlSiN coating performance obtained by these two techniques in the milling of duplex stainless-steel alloy LDX 2101 was carried out. These coatings were obtained by the conventional direct current magnetron sputtering (dc MS) and the novel high power impulse magnetron sputtering (HiPIMS). The coatings were analyzed and characterized, determining mechanical properties for both coatings, registering slightly higher mechanical properties for the HiPIMS-obtained coating. Machining tests were performed with varying cutting length and feed-rate, while maintaining constant values for axial and radial depth of cut and cutting speed. The surface roughness of the material after machining was assessed, as well as the wear sustained by each of the tool types, identifying the wear mechanisms and behavior of these tools, as well as registering the flank wear values presented for each of the tested tools. The HiPIMS-obtained coating exhibited a very similar behavior when compared to the other, producing similar surface roughness quality. However, the HiPIMS coating exhibited less wear for higher cutting lengths, proving to be a better choice in this case, especially regarding tool life.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Build-up-edge (BUE), high-temperature machining and tool wear (TW) are some of the problems associated with difficult-to-machine materials for high-temperature applications, contributing ...significantly to high-cost manufacturing and poor tool life (TL) management. A detailed review of non-traditional machining processes that ease the machinability of INCONEL
, decrease manufacturing costs and suppress assembly complications is thus of paramount significance. Progress taken within the field of INCONEL
non-conventional processes from 2016 to 2023, the most recent solutions found in the industry, and the prospects from researchers have been analysed and presented. In ensuing research, it was quickly noticeable that some techniques are yet to be intensely exploited. Non-conventional INCONEL
machining processes have characteristics that can effectively increase the mechanical properties of the produced components without tool-workpiece contact, posing significant advantages over traditional manufacturing.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Strategies for obtaining deep slots in soft materials can vary significantly. Conventionally, the tool travels along the slot, removing material mainly with the side cutting edges. However, a “plunge ...milling” strategy is also possible, performing the cut vertically, taking advantage of the tip cutting edges that almost reach the center of the tool. Although both strategies are already commonly used, there is a clear gap in the literature in studies that compare tool wear, surface roughness, and productivity in each case. This paper describes an experimental study comparing the milling of deep slots in AA7050-T7451 aluminum alloy, coated with a novel DLCSiO500W3.5O2 layer to minimize the aluminum adhesion to the tool, using conventional and plunge milling strategies. The main novelty of this paper is to present a broad study regarding different factors involved in machining operations and comparing two distinct strategies using a novel tool coating in the milling of aeronautical aluminum alloy. Tool wear is correlated with the vibrations of the tools in each situation, the cycle time is compared between the cases studied, and the surface roughness of the machined surfaces is analyzed. This study concludes that the cycle time of plunge milling can be about 20% less than that of conventional milling procedures, favoring economic sustainability and modifying the wear observed on the tools. Plunge milling can increase productivity, does not increase tool tip wear, and avoids damaging the side edges of the tool, which can eventually be used for final finishing operations. Therefore, it can be said that the plunge milling strategy improves economic and environmental sustainability as it uses all the cutting edges of the tools in a more balanced way, with less global wear.
A consistent evolution in materials developed for the industry and chip-start cutting processes has been acknowledged over the years. Cutting tool improvement through applying advanced coatings has ...proven very effective, enabling tool life (TL) extension while ensuring better surface quality. TiAlTaN coating enhances TL and surface quality in machining processes. However, only minimal research has been dedicated to comprehending the interaction between workpieces composed of Cu-Be and diamond tools. AMPCO®, a Cu-Be alloy, plays a crucial role in moulding inserts, offering high wear resistance and contributing to extended mould longevity and improved productivity. The main objective of this work is to assess, identify, and quantify tool wear (TW) mechanisms evaluation while machining AMPCO® with WC-Co uncoated tools and TiAlTaN-coated tools by physical vapour deposition (PVD). Evaluating tool performance while varying cutting length (Lcut) and feed rate (f) at three distinct levels and analysing the surface roughness (SR) produced in the machined surface were the primary purposes of this work. The results obtained with coated tools were distinct from those obtained with uncoated tools. While uncoated tools suffered from substrate abrasion and adhesion, the coated tools suffered mainly from delamination, followed by chipping. Furthermore, f and Lcut significantly influence the quality of the machined surface. TiAlTaN-coated tools performed significantly worse than uncoated tools, proving that the coating needs significant improvements to be considered as an alternative in milling Cu-Be alloys.