Introduction The aim of this study was to assess the differences in airway shape and volume among subjects with various facial patterns. Methods Cone-beam computed tomography records of 62 nongrowing ...patients were used to evaluate the pharyngeal airway volume (superior and inferior compartments) and shape. This was done by using 3-dimensional virtual surface models to calculate airway volumes instead of estimates based on linear measurements. Subgroups of the sample were determined by anteroposterior jaw relationships and vertical proportions. Results There was a statistically significant relationship between the volume of the inferior component of the airway and the anteroposterior jaw relationship ( P = 0.02), and between airway volume and both size of the face and sex ( P = 0.02, P = 0.01). No differences in airway volumes related to vertical facial proportions were found. Skeletal Class II patients often had forward inclination of the airway ( P <0.001), whereas skeletal Class III patients had a more vertically oriented airway ( P = 0.002). Conclusions Airway volume and shape vary among patients with different anteroposterior jaw relationships; airway shape but not volume differs with various vertical jaw relationships. The methods developed in this study make it possible to determine the relationship of 3-dimensional pharyngeal airway surface models to facial morphology, while controlling for variability in facial size.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Introduction In this study, we present a novel classification method for individual assessment of midpalatal suture morphology. Methods Cone-beam computed tomography images from 140 subjects (ages, ...5.6-58.4 years) were examined to define the radiographic stages of midpalatal suture maturation. Five stages of maturation of the midpalatal suture were identified and defined: stage A, straight high-density sutural line, with no or little interdigitation; stage B, scalloped appearance of the high-density sutural line; stage C, 2 parallel, scalloped, high-density lines that were close to each other, separated in some areas by small low-density spaces; stage D, fusion completed in the palatine bone, with no evidence of a suture; and stage E, fusion anteriorly in the maxilla. Intraexaminer and interexaminer agreements were evaluated by weighted kappa tests. Results Stages A and B typically were observed up to 13 years of age, whereas stage C was noted primarily from 11 to 17 years but occasionally in younger and older age groups. Fusion of the palatine (stage D) and maxillary (stage E) regions of the midpalatal suture was completed after 11 years only in girls. From 14 to 17 years, 3 of 13 (23%) boys showed fusion only in the palatine bone (stage D). Conclusions This new classification method has the potential to avoid the side effects of rapid maxillary expansion failure or unnecessary surgically assisted rapid maxillary expansion for late adolescents and young adults.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Working with DICOM craniofacial images Grauer, Dan; Cevidanes, Lucia S.H; Proffit, William R
American journal of orthodontics and dentofacial orthopedics,
09/2009, Volume:
136, Issue:
3
Journal Article
Peer reviewed
Open access
The increasing use of cone-beam computed tomography (CBCT) requires changes in our diagnosis and treatment planning methods as well as additional training. The standard for digital computed ...tomography images is called digital imaging and communications in medicine (DICOM). In this article we discuss the following concepts: visualization of CBCT images in orthodontics, measurement in CBCT images, creation of 2-dimensional radiographs from DICOM files, segmentation engines and multimodal images, registration and superimposition of 3-dimensional (3D) images, special applications for quantitative analysis, and 3D surgical prediction. CBCT manufacturers and software companies are continually working to improve their products to help clinicians diagnose and plan treatment using 3D craniofacial images.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Introduction Our objectives in this study were to evaluate in 3 dimensions the growth and treatment effects on the midface and the maxillary dentition produced by facemask therapy in association with ...rapid maxillary expansion (RME/FM) compared with bone-anchored maxillary protraction (BAMP). Methods Forty-six patients with Class III malocclusion were treated with either RME/FM (n = 21) or BAMP (n = 25). Three-dimensional models generated from cone-beam computed tomographic scans, taken before and after approximately 1 year of treatment, were registered on the anterior cranial base and measured using color-coded maps and semitransparent overlays. Results The skeletal changes in the maxilla and the right and left zygomas were on average 2.6 mm in the RME/FM group and 3.7 mm in the BAMP group; these were different statistically. Seven RME/FM patients and 4 BAMP patients had a predominantly vertical displacement of the maxilla. The dental changes at the maxillary incisors were on average 3.2 mm in the RME/FM group and 4.3 mm in the BAMP group. Ten RME/FM patients had greater dental compensations than skeletal changes. Conclusions This 3-dimensional study shows that orthopedic changes can be obtained with both RME/FM and BAMP treatments, with protraction of the maxilla and the zygomas. Approximately half of the RME/FM patients had greater dental than skeletal changes, and a third of the RME/FM compared with 17% of the BAMP patients had a predominantly vertical maxillary displacement.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Background
Stem cell therapy with bone marrow‐derived mesenchymal stem cells is a promising tissue engineering strategy to promote regeneration of craniofacial bone.
Purpose
To determine whether cell ...therapy with ex vivo expanded stem cell populations would be safe and efficacious in the regeneration of large alveolar defects in patients with a history of cleft palate or craniofacial trauma.
Materials and Methods
Eighteen patients (10 patients with traumatic injury and 8 patients with cleft palate) presenting with missing teeth associated with horizontal alveolar bone deficiencies were included in this randomized controlled clinical trial. Patients were randomized to receive either conventional autogenous block grafts or stem cell therapy. After a healing period of 4 months the treated sites were re‐entered and the bone width re‐assessed prior to implant placement. Implant stability was evaluated through torque testing of the implant upon insertion and at 6 months postloading.
Results
The mean gain in bone width was 1.5 ± 1.5 mm in the stem cell therapy group and 3.3 ± 1.4 mm in the control group. Overall, bone gain was higher in trauma patients as compared to patients with cleft palate, for both the control and the stem cell therapy groups. Most postoperative complications were wound dehiscences and incision line openings. Implants were placed successfully in 5 out of 10 patients in the stem cell therapy group and in all 8 patients in the control group. One implant from the control/cleft palate group failed before loading, while the rest of the implants were loaded successfully and remained stable at 6 months. The patients who did not receive implants were re‐treated with autogenous block bone graft.
Conclusion
The ability of stem cells to treat large alveolar defects is safe, yet, their ability to completely reconstitute large alveolar defects is limited. This approach requires further optimization to meet the outcomes seen using current methods to treat large defects, particularly those resultant of cleft palate.
Full text
Available for:
CMK, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Introduction The aim of this study was to analyze the diagnostic performance of the cervical vertebral maturation (CVM) method in estimating accurately the stages of maturation of the midpalatal ...suture. Methods Cone-beam computed tomography (CBCT) images from 142 subjects (84 female, 58 male; mean age, 14.8 ± 9.7 years) were analyzed by 2 calibrated examiners to define, by visual analysis, the maturational stages of the cervical vertebrae and the midpalatal suture. These CBCT images were required by orthodontists and surgeons for diagnosis and treatment purposes. Positive likelihood ratios (LHRs) were calculated to evaluate the diagnostic performance of the CVM stages in identifying the maturational stages of the midpalatal suture. Results Positive LHRs greater than 10 were found for several cervical vertebral stages (CSs), including CS1 and CS2 for the identification of midpalatal suture stages A and B, CS3 for the diagnosis of midpalatal suture stage C, and CS5 for the assessment of midpalatal suture stages D and E. These positive LHRs indicated large and often conclusive increases in the likelihood that the CVM stages were associated with specific stages of midpalatal suture maturation. At CS4, there were a moderate positive LHR for stage C and low positive LHRs for stages D and E. Conclusions Most CVM stages can be used for the diagnosis of the stages of maturation of the midpalatal suture, so that CBCT imaging may not be necessary in these patients. In the postpubertal period, however, an assessment of the midpalatal suture maturation using CBCT images may be indicated in deciding between conventional rapid maxillary expansion and surgically assisted rapid maxillary expansion. On the other hand, if the CVM stage cannot be assessed, chronologic age may be a viable alternative to predict some midpalatal suture stages (particularly the early stages).
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Rapid maxillary expansion (RME) is an effective orthopedic procedure that can be used to address problems concerned with the growth of the midface. This procedure also may produce positive side ...effects on the general health of the patient. The aim of the present consensus paper was to identify and evaluate studies on the changes in airway dimensions and muscular function produced by RME in growing patients. A total of 331 references were retrieved from a database search (PubMed). The widening of the nasal cavity base after midpalatal suture opening in growing patients allows the reduction in nasal airway resistance with an improvement of the respiratory pattern. The effects of RME on the upper airway, however, have been described as limited and local, and these effects become diminished farther down the airway, possibly as a result of soft-tissue adaptation. Moreover, limited information is available about the long-term stability of the airway changes produced by RME. Several studies have shown that maxillary constriction may play a role in the etiology of more severe breathing disorders such as obstructive sleep apnea (OSA) in growing subjects. Early orthodontic treatment with RME is able to reduce the symptoms of OSA and improve polysomnographic variables. Finally, early orthopedic treatment with RME also is beneficial to avoid the development of facial skeletal asymmetry resulting from functional crossbites that otherwise may lead to functional and structural disorders of the stomatognathic system later in life.
The aim of this study was to evaluate the cephalometric outcome of bone-anchored maxillary protraction (BAMP) in individuals with unilateral complete cleft lip and palate (UCLP).
The experimental ...group (EG) comprised 23 individuals (17 males and 6 females) with UCLP and a mean age of 11.7 years. At least 6 months after secondary alveolar bone grafting, Bollard miniplates were installed in the posterior region of the maxilla and in the anterior region of the mandible. Class III elastics were recommended to be worn for 24 hours/day for a mean time of 18 months. Cone beam computed tomography (CBCT) was obtained before (T1) and after treatment (T2). The control group (CG) consisted of 23 individuals with UCLP matched by initial age and gender with the EG and without any orthopaedic or surgical intervention performed between T1 and T2. The interval between T1 and T2 observations was 18 months for both groups. Twenty-one cephalometric variables were analysed. Intra- and intergroup comparisons were performed using paired and independent t-tests, respectively (P < 0.05).
BAMP caused a greater maxillary protrusion (SNA) and a greater decrease of Class III maxillomandibular discrepancy (ANB and Wits appraisal) compared with the CG. BAMP also caused a counterclockwise rotation of the occlusal plane (Occ Plane to FH) and an improvement in the molar relationship compared with controls.
BAMP therapy demonstrated a significant orthopaedic maxillary protraction and an improvement in the Class III skeletal pattern in UCLP.
Summary Objective To assess 3D morphological variations and local and systemic biomarker profiles in subjects with a diagnosis of temporomandibular joint osteoarthritis (TMJ OA). Design Twenty-eight ...patients with long-term TMJ OA (39.9 ± 16 years), 12 patients at initial diagnosis of OA (47.4 ± 16.1 years), and 12 healthy controls (41.8 ± 12.2 years) were recruited. All patients were female and had cone beam CT scans taken. TMJ arthrocentesis and venipuncture were performed on 12 OA and 12 age-matched healthy controls. Serum and synovial fluid levels of 50 biomarkers of arthritic inflammation were quantified by protein microarrays. Shape Analysis MANCOVA tested statistical correlations between biomarker levels and variations in condylar morphology. Results Compared with healthy controls, the OA average condyle was significantly smaller in all dimensions except its anterior surface, with areas indicative of bone resorption along the articular surface, particularly in the lateral pole. Synovial fluid levels of ANG, GDF15, TIMP-1, CXCL16, MMP-3 and MMP-7 were significantly correlated with bone apposition of the condylar anterior surface. Serum levels of ENA-78, MMP-3, PAI-1, VE-Cadherin, VEGF, GM-CSF, TGFβb1, IFNγg, TNFαa, IL-1αa, and IL-6 were significantly correlated with flattening of the lateral pole. Expression levels of ANG were significantly correlated with the articular morphology in healthy controls. Conclusions Bone resorption at the articular surface, particularly at the lateral pole was statistically significant at initial diagnosis of TMJ OA. Synovial fluid levels of ANG, GDF15, TIMP-1, CXCL16, MMP-3 and MMP-7 were correlated with bone apposition. Serum levels of ENA-78, MMP-3, PAI-1, VE-Cadherin, VEGF, GM-CSF, TGFβ1, IFNγ, TNFα, IL-1α, and IL-6 were correlated with bone resorption.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Three-dimensional (3D) imaging techniques can provide valuable information to clinicians and researchers. But as we move from traditional 2-dimensional (2D) cephalometric analysis to new 3D ...techniques, it is often necessary to compare 2D with 3D data. Cone-beam computed tomography (CBCT) provides simulation tools that can help bridge the gap between image types. CBCT acquisitions can be made to simulate panoramic, lateral, and posteroanterior cephalometric radioagraphs so that they can be compared with preexisting cephalometric databases. Applications of 3D imaging in orthodontics include initial diagnosis and superimpositions for assessing growth, treatment changes, and stability. Three-dimensional CBCT images show dental root inclination and torque, impacted and supernumerary tooth positions, thickness and morphology of bone at sites of mini-implants for anchorage, and osteotomy sites in surgical planning. Findings such as resorption, hyperplasic growth, displacement, shape anomalies of mandibular condyles, and morphological differences between the right and left sides emphasize the diagnostic value of computed tomography acquisitions. Furthermore, relationships of soft tissues and the airway can be assessed in 3 dimensions.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
PDF
