Human nasal epithelial cells (hNECs) are an essential cell source for the reconstruction of the respiratory pseudostratified columnar epithelium composed of multiple cell types in the context of ...infection studies and disease modeling. Hitherto, manual seeding has been the dominant method for creating nasal epithelial tissue models. However, the manual approach is slow, low-throughput and has limitations in terms of achieving the intricate 3D structure of the natural nasal epithelium in a uniform manner. 3D Bioprinting has been utilized to reconstruct various epithelial tissue models, such as cutaneous, intestinal, alveolar, and bronchial epithelium, but there has been no attempt to use of 3D bioprinting technologies for reconstruction of the nasal epithelium. In this study, for the first time, we demonstrate the reconstruction of the nasal epithelium with the use of primary hNECs deposited on Transwell inserts via droplet-based bioprinting (DBB), which enabled high-throughput fabrication of the nasal epithelium in Transwell inserts of 24-well plates. DBB of nasal progenitor cells ranging from one-tenth to one-half of the cell seeding density employed during the conventional cell seeding approach enabled a high degree of differentiation with the presence of cilia and tight-junctions over a 4-week air-liquid interface culture. Single cell RNA sequencing of these cultures identified five major epithelial cells populations, including basal, suprabasal, goblet, club, and ciliated cells. These cultures recapitulated the pseudostratified columnar epithelial architecture present in the native nasal epithelium and were permissive to respiratory virus infection. These results denote the potential of 3D bioprinting for high-throughput fabrication of nasal epithelial tissue models not only for infection studies but also for other purposes such as disease modeling, immunological studies, and drug screening.
Display omitted
•A hybrid lateral and axial system is formed to build a 3D laser scanner device.•Additive manufacturing methods were established to produce scanner systems.•Electromagnetic and ...hydraulic actuation were used in lateral and axial scanners respectively.•Device shows comparable and cheaper solution to MEMS to scan gastrointestinal tract.
Imaging of tissue sections at multiple depths with a miniaturized optical imaging probe necessitates 3D actuation capability. A number of MEMS studies in literature have addressed 3D actuation either through a single scanning unit with three degrees of freedom, or combination of multiple scanning units each having one or more degrees of freedom in scanning. Such microsystems are manufactured with high fabrication complexity while only offering a limited (typically < 0.5 mm) actuation capability in the axial dimension whereas advances in the adaptive optics and wave-front shaping allow for light penetration up to several millimeters within the tissue. In an effort to address deep tissue slices that light can penetrate using adaptive optics, here we present a 3D printed Polyamide-based 3D actuator with hybrid hydraulic and electromagnetic actuation mechanisms. Our actuator is able to provide up to 3 mm axial displacement in air (and 4 mm in tissue), with only a pumped fluid pressure of 500 kPa. Furthermore, the actuator provides 5 degrees total optical scan angle in the lateral directions, with 5 Vrms drive voltage that is applied to the coil. Overall, the device is manufactured in a compact form factor, having 10 mm diameter and 45 mm length, making it suitable for endoscopic or within hand-held probe use. Using selective laser sintering process in manufacturing the actuator allows for low-cost and rapid manufacturing capability making the device attractive for use in disposable laser scanning probes for imaging within the gastrointestinal tract.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Clinical lung transplantation has rapidly established itself as the gold standard of treatment for end‐stage lung diseases in a restricted group of patients since the first successful lung transplant ...occurred. Although significant progress has been made in lung transplantation, there are still numerous obstacles on the path to clinical success. The development of bioartificial lung grafts using patient‐derived cells may serve as an alternative treatment modality; however, challenges include developing appropriate scaffold materials, advanced culture strategies for lung‐specific multiple cell populations, and fully matured constructs to ensure increased transplant lifetime following implantation. This review highlights the development of tissue‐engineered tracheal and lung equivalents over the past two decades, key problems in lung transplantation in a clinical environment, the advancements made in scaffolds, bioprinting technologies, bioreactors, organoids, and organ‐on‐a‐chip technologies. The review aims to fill the lacuna in existing literature toward a holistic bioartificial lung tissue, including trachea, capillaries, airways, bifurcating bronchioles, lung disease models, and their clinical translation. Herein, the efforts are on bridging the application of lung tissue engineering methods in a clinical environment as it is thought that tissue engineering holds enormous promise for overcoming the challenges associated with the clinical translation of bioengineered human lung and its components.
Chronic respiratory diseases are a leading cause of death globally, with limited treatment regimes. Toward this, the review highlights the development of tissue‐engineered tracheal and lung equivalents over the course past two decades, key problems in lung transplantation in a clinical environment, the advancements made in scaffolds, bioprinting technologies, bioreactors, organoids, and organ‐on‐a‐chip technologies.
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
We present a low-cost and biocompatible 3D-printed fluidic device composed of a main body and two lids with membranes in between forming a tunable lens. The main body and the lids of the device is ...manufactured using stereolithography (SLA) technology and comprises of one or two inlets. Collagen type-I enriched Sodium Alginate membranes are sandwiched between the main body and the top and the bottom lids. A syringe pump is employed to control the amount of liquid inside the chamber, thus tuning the radius of curvature of both membranes. The device dimensions are chosen as 15 × 10 × 7 mm
3
(length × width × height), towards integration with previously developed miniaturized 3D-printed laser scanning imagers, offering focus adjustment capability. The extracted collagen, which is mixed with the membrane material, offers (1) a lens-mimicking structure, (2) biocompatibility, and (3) capability of tailoring membrane mechanical properties through adjusting collagen mass ratio. Using the manufactured device, we demonstrate focus tuning, hysteresis characterization and resolution target imaging experiments conducted at different target distances. The 3D-printed tunable lens structure is suitable for integration with a wide range of minimally invasive laser scanned imagers or ablation units presented in the literature.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
The aim of this study was to evaluate anti-cancer properties of hesperetin (Hsp) and hesperetin-loaded poly(lactic-co-glycolic acid) nanoparticles (HspNPs) for glioblastoma treatment. Nanoparticles ...prepared by single emulsion method had a size of less than 300 nm with 70.7 ± 3.9% reaction yield and 26.4 ± 1.1% Hsp loading capacity. Treatment of C6 glioma cells with HspNPs for 24 and 48 h resulted in dose- and time-dependent decrease in cell viability, with approximate IC
50
of 28 and 21 μg/mL, respectively (p = .036 for 24 h, p = .025 for 48 h). The percentage of PCNA positive cells decreased to 20% and 10%, respectively, for Hsp- and HspNP-treated cells at concentration of 100 µg/mL. Treatment with increasing concentrations of HspNPs (25, 50, 75 and 100 µg/mL) resulted in 9.1-, 7-, 12.5- and 12.7-fold in increase in apoptotic cell number. Optimum doses of Hsp and HspNPs were found to increase oxidative damage in C6 glioma cells. MDA levels, an indicator of lipid peroxidation, were found to be significantly elevated at 75 and 100 µg/mL exposure concentration of HspNPs with (p = .002) and (p = .018), respectively for 48-h treatment. The results obtained with this study showed biocompatible polymeric nanoparticle systems has great advantages to enhance anti-cancer activity and poor solubility of therapeutic agents. Overall our findings suggest that Hsp-loaded PLGA nanoparticle systems showed significant anti-cancer activity and HspNPs could be used as promising novel anti-cancer agent.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
Hesperetin was effectively encapsulated into poly (d,l-lactic-co-glycolic acid) nanoparticles by using experimental design methods. A seven-factor Plackett-Burman design was used in order to ...determine the major process parameters. A significant linear equation, which shows the effect of each process parameter on encapsulation efficiency was developed, and then the most effective factors were determined. Further investigation and optimization was carried out by applying the three-factor three-level Box-Behnken design. Significant second-order mathematical models were developed by regression analysis of the experimental data for both responses: encapsulation efficiency and nanoparticle size. The two step experimental design allowed the synthesis of the desired nanoparticle formulations with maximum encapsulation efficiency (80.5 4.9%) and minimum particle size (260.2 16.5 nm) at optimum process conditions: 0.5% polyvinyl alcohol (PVA) concentration, 5.13 water:organic phase ratio, and 3.59 ml min−1 flow rate of the emulsified solution into 0.1% PVA. Furthermore, the biological activity of these optimized nanoparticles were determined with antimicrobial activity and cytotoxicity studies; results were then compared to the free hesperetin. The cytotoxicity result revealed that hesperetin and hesperetin-loaded nanoparticles were biocompatible with normal cell line L929 fibroblast cells up to 184.83 and 190.88 g ml−1 for 24 h, and up to 133.24 and 134.80 g ml−1 for 48 h, respectively. In the antimicrobial study, the optimized nanoparticle showed inhibition activity (minimal inhibitory concentration (MIC) values were 125 g ml−1 for Escherichia coli, and 200 g ml−1 for Staphylococcus aureus), while the free hesperetin did not demonstrate activity in both strains (MIC value >200 g ml−1). These in vitro results may provide useful information for the investigation of hesperetin-loaded nanoparticles in diagnostic and therapeutic applications.
Three-dimensional (3D) bioprinting offers promising solutions to the complex challenge of vascularization in biofabrication, thereby enhancing the prospects for clinical translation of engineered ...tissues and organs. While existing reviews have touched upon 3D bioprinting in vascularized tissue contexts, the current review offers a more holistic perspective, encompassing recent technical advancements and spanning the entire multistage bioprinting process, with a particular emphasis on vascularization. The synergy between 3D bioprinting and vascularization strategies is crucial, as 3D bioprinting can enable the creation of personalized, tissue-specific vascular network while the vascularization enhances tissue viability and function. The review starts by providing a comprehensive overview of the entire bioprinting process, spanning from pre-bioprinting stages to post-printing processing, including perfusion and maturation. Next, recent advancements in vascularization strategies that can be seamlessly integrated with bioprinting are discussed. Further, tissue-specific examples illustrating how these vascularization approaches are customized for diverse anatomical tissues towards enhancing clinical relevance are discussed. Finally, the underexplored intraoperative bioprinting (IOB) was highlighted, which enables the direct reconstruction of tissues within defect sites, stressing on the possible synergy shaped by combining IOB with vascularization strategies for improved regeneration.
Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based ...on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2 % or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.
Display omitted
•Craniomaxillofacial reconstruction is a challenging clinical dilemma•Skin was built by precise deposition of hypodermal and dermal components•AdECM was bioprintable and exhibited de novo adipogenic capabilities•Combinatorial delivery of adECM and ADSCs facilitated the reconstruction of skin•Adipogenesis and downgrowth of hair follicle-like structures were achieved
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Abstract
Gaucher disease (GD), the most prevalent lysosomal disorder, is caused by
GBA1
gene mutations, leading to deficiency of glucocerebrosidase, and accumulation of glycosphingolipids in cells of ...the mononuclear phagocyte system. While skeletal diseases are the leading cause of morbidity and reduced quality of life in GD, the pathophysiology of bone involvement is not yet fully understood, partly due to lack of relevant human model systems. In this work, we present the first 3D human model of GD using aspiration-assisted freeform bioprinting, which enables a platform tool with a potential for decoding the cellular basis of the developmental bone abnormalities in GD. In this regard, human bone marrow-derived mesenchymal stem cells (obtained commercially) and peripheral blood mononuclear cells derived from a cohort of GD patients, at different severities, were co-cultured to form spheroids and differentiated into osteoblast and osteoclast lineages, respectively. Co-differentiated spheroids were then 3D bioprinted into rectangular tissue patches as a bone tissue model for GD. The results revealed positive alkaline phosphatase (ALP) and tartrate-resistant ALP activities, with multi-nucleated cells demonstrating the efficacy of the model, corroborating with gene expression studies. There were no significant changes in differentiation to osteogenic cells but pronounced morphological deformities in spheroid formation, more evident in the ‘severe’ cohort, were observed. Overall, the presented GD model has the potential to be adapted to personalized medicine not only for understanding the GD pathophysiology but also for personalized drug screening and development.