In inertial confinement fusion, quantitative and high-spatial resolution (Formula: see textm) measurements of the X-rays self-emitted by the hotspot are critical for studying the physical processes ...of the implosion stagnation stage. Herein, the 8 ± 0.39-keV monochromatic X-ray distribution from the entire hotspot is quantitatively observed in 5-Formula: see textm spatial resolution using a Kirkpatrick-Baez microscope, with impacts from the responses of the diagnosis system removed, for the first time, in implosion experiments at the 100 kJ laser facility in China. Two-dimensional calculations along with 2.5% P2 drive asymmetry and 0.3 ablator self-emission are congruent with the experimental results, especially for the photon number distribution, hotspot profile, and neutron yield. Theoretical calculations enabled a better understanding of the experimental results. Furthermore, the origins of the 17.81% contour profile of the deuterium-deuterium hotspot and the accurate Gaussian source approximation of the core emission area in the implosion capsule are clarified in detail. This work is significant for quantitatively exploring the physical conditions of the hotspot and updating the theoretical model of capsule implosion.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
We present the first integrated implosion experiments which were carried out on the SG-III Laser facility in 2015. Vacuum hohlraums and squared laser pulses were used in the experiments. The purpose ...of the experiments was to demonstrate the one-dimensional implosion performance at low-convergence ratios. To characterize the implosion performance, the hohlraum energetics, the implosion dynamics and the nuclear products were measured. In particular, the radiation flux was diagnosed through laser entrance hole at different angles by an array of flat response detectors, and the energy and the spectrum of the back-scattered lasers were monitored for 8 laser beams which correspond to 2 beams in each cone at the lower hemisphere. Moreover, the hotspot shape was imaged using KB microscopes of high spatial resolution simultaneously from the equator and polar views. Taking advantage of the high resolution, some detailed structures in the hotspots were noticed. For the best implosion performances, the neutron yields over 1D calculation reached 50% at the convergence-ratios of 15.
The persistence of spin-polarized fuels is a crucial problem for polarized magnetic and inertial confinement fusion (ICF). The depolarizations of polarized deuterium-tritium (DT) fuels in indirectly ...driven ICF implosions are investigated with three-dimensional spin transport hydrodynamics simulations. The spin transport equations for deuterons and tritons are derived with the density matrix formalism, which are used to investigate the evolutions of spin eigenstate distributions of DT fuel. The depolarization of DT ions by strong self-generated magnetic fields and the mixings of DT ions with different spin states can be captured by the spin transport equation. The simulation results show that triton polarizations are sensitive to large scale magnetic fields generated by polar mode asymmetries. It is also found that the depolarization of tritons can be reduced by an optimized spin alignment of the polarized fuel. The methods and results can be used to optimize the design of polarized fusion targets and interpret polarized fusion experiments.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UL, UM, UPUK
Inertial fusion energy （IFE） has been considered a promising, nearly inexhaustible source of sustainable carbon-free power for the world＇s energy future. It has long been recognized that the control ...of hydrodynamic instabilities is of critical importance for ignition and high-gain in the inertial-confinement fusion （ICF） hot-spot ignition scheme. In this mini-review, we summarize the progress of theoretical and simulation research of hydrodynamic instabilities in the ICF central hot-spot implosion in our group over the past decade. In order to obtain sufficient understanding of the growth of hydrodynamic instabilities in ICF, we first decompose the problem into different stages according to the implosion physics processes. The decomposed essential physics pro- cesses that are associated with ICF implosions, such as Rayleigh-Taylor instability （RTI）, Richtmyer-Meshkov instability （RMI）, Kelvin-Helmholtz instability （KHI）, convergent geometry effects, as well as perturbation feed-through are reviewed. Analyti- cal models in planar, cylindrical, and spherical geometries have been established to study different physical aspects, including density-gradient, interface-coupling, geometry, and convergent effects. The influence of ablation in the presence of preheating on the RTI has been extensively studied by numerical simulations. The KHI considering the ablation effect has been discussed in detail for the first time. A series of single-mode ablative RTI experiments has been performed on the Shenguang-II laser facility. The theoretical and simulation research provides us the physical insights of linear and weakly nonlinear growths, and nonlinear evolutions of the hydrodynamic instabilities in ICF implosions, which has directly supported the research of ICF ignition target design. The ICF hot-spot ignition implosion design that uses several controlling features, based on our current understanding of hydrodynamic instabilities, to address shell implosion stability, has been briefly described, several of which are novel.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OBVAL, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
•Efficient computing approach presented for laser driven inertial confinement fusion•Guaranteed symmetry, strictly diagonally dominant and positive definite properties.•GPU based Preconditioned ...Conjugate gradient iteration approach.•The radiation models are efficiently solved and validated with two examples.
Radiation computation is very important for high energy density experiments design in the laser-driven Inertial Confinement Fusion. The view-factor based models are often used to calculate the radiation on the capsule inside a hohlraum. However, it usually takes much time to solve them when the number of equations is very large.
In this paper, an efficient iteration approach GPU is presented. The core idea is: (1) guaranteed symmetry, strictly diagonally dominant, and positive definite properties underlying the models are described, (2) a preconditioned conjugate gradient iteration approach is presented to compute the radiation based on such guaranteed properties, and (3) such approach is then parallelized and implemented for GPU so that the large scale models, especially for the non-linear model, can be efficiently solved in reasonable time.
Finally, two experimental targets for Shenguang laser facilities built in China are demonstrated and compared to validate the efficiency of the presented approach. The results show that, the models’ computation (1) can be speeded up with successive over-relax iteration method by eight times as compared with Cholesky factorization based direct approach, (2) can be accelerated more with the preconditioned conjugate gradient iteration approach by almost eight times, and (3) can be further accelerated about 2 to 4 times as it parallelized and run on the GPU, which enables the large scale models, can be efficiently solved in reasonable time on the usual desktop computers.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Laser drive ramp compression is an important method to achieve an extremely high-pressure but relatively low-temperature material state. In this study, we found VISAR streaks disappearing under high ...pressure. To solve this problem, the mechanism of probe-laser absorption in laser drive ramp compression experiments has been studied, and X-ray preheat is found to be the main factor in this mechanism. Subsequently, target configuration optimization and code simulation were performed based on previous experiments, and laser drive ramp compression experiments were performed on the SHENGGUANG prototype facility. In the experiments, the probe-laser reflectivity was above 90% at 450 GPa, which is much higher than those in previous experiments, demonstrating that the X-ray preheat was shielded well with the optimized target configuration.
Extrapolation of implosion performance between different laser energy scales is investigated for indirect drive through a semi-hydro-equivalent design. Since radiation transport is ...non-hydro-equivalent, the peak radiation temperature of the hohlraum and the ablation velocity of the capsule ablator are not scale-invariant when the sizes of the hohlraum and the capsule are scale-varied. A semi-hydro-equivalent design method that keeps the implosion velocity Vi, adiabat αF, and PL/Rhc2 (where PL is the laser power and Rhc is the hohlraum and capsule scale length) scale-invariant, is proposed to create hydrodynamically similar implosions. The semi-hydro-equivalent design and the scaled implosion performance are investigated for the 100 kJ Laser Facility (100 kJ-scale) and the National Ignition Facility (NIF-scale) with about 2 MJ laser energy. It is found that the one-dimensional implosion performance is approximately hydro-equivalent when Vi and αF are kept the same. Owing to the non-hydro-equivalent radiation transport, the yield-over-clean without α-particle heating (YOCnoα) is slightly lower at 100 kJ-scale than at NIF-scale for the same scaled radiation asymmetry or the same initial perturbation of the hydrodynamic instability. The overall scaled two-dimensional implosion performance is slightly lower at 100 kJ-scale. The general Lawson criterion factor scales as χnoα2D∼S1.06±0.04 (where S is the scale-variation factor) for the semi-hydro-equivalent implosion design with a moderate YOCnoα. Our study indicates that χnoα ≈ 0.379 is the minimum requirement for the 100 kJ-scale implosion to demonstrate the ability to achieve marginal ignition at NIF-scale.
Laser pulse shape design is a key work in the design of indirect-laser-driven experiments, especially for long pulse laser driven quasi-isentropic compression experiments. A method for designing such ...a laser pulse shape is given here. What’s more, application experiments were performed, and the results of a typical shot are presented. At last of this article, the details of the application of the method are discussed, such as the equation parameter choice, radiation ablation pressure expression, and approximations in the method. The application shows that the method can provide reliable descriptions of the energy distribution in a hohlraum target; thus, it can be used in the design of long-pulse laser driven quasi-isentropic compression experiments and even other indirect-laser-driven experiments.
Progress in octahedral spherical hohlraum study Lan, Ke; Liu, Jie; Li, Zhichao ...
Matter and Radiation at Extremes,
January 2016, 20160100, 2016-01-01, Volume:
1, Issue:
1
Journal Article, Book Review
Peer reviewed
Open access
In this paper, we give a review of our theoretical and experimental progress in octahedral spherical hohlraum study. From our theoretical study, the octahedral spherical hohlraums with 6 Laser ...Entrance Holes (LEHs) of octahedral symmetry have robust high symmetry during the capsule implosion at hohlraum-to-capsule radius ratio larger than 3.7. In addition, the octahedral spherical hohlraums also have potential superiority on low backscattering without supplementary technology. We studied the laser arrangement and constraints of the octahedral spherical hohlraums, and gave a design on the laser arrangement for ignition octahedral hohlraums. As a result, the injection angle of laser beams of 50°–60° was proposed as the optimum candidate range for the octahedral spherical hohlraums. We proposed a novel octahedral spherical hohlraum with cylindrical LEHs and LEH shields, in order to increase the laser coupling efficiency and improve the capsule symmetry and to mitigate the influence of the wall blowoff on laser transport. We studied on the sensitivity of the octahedral spherical hohlraums to random errors and compared the sensitivity among the octahedral spherical hohlraums, the rugby hohlraums and the cylindrical hohlraums, and the results show that the octahedral spherical hohlraums are robust to these random errors while the cylindrical hohlraums are the most sensitive. Up till to now, we have carried out three experiments on the spherical hohlraum with 2 LEHs on Shenguang(SG) laser facilities, including demonstration of improving laser transport by using the cylindrical LEHs in the spherical hohlraums, spherical hohlraum energetics on the SGIII prototype laser facility, and comparisons of laser plasma instabilities between the spherical hohlraums and the cylindrical hohlraums on the SGIII laser facility.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
PDF
