Accelerating structures operating in Ka-Band are foreseen to achieve gradients around 150 MV/m. Among possible applications of a Ka-Band accelerating structure we refer to the beam phase-space ...manipulation for the Compact Light XLS project as well and medical and industrial applications. In this paper, a Ka-Band Klystron amplifier is being investigated in order to feed Ka-Band accelerating structures. The initial design is presented including the high-power DC gun and the beam focusing channel.
In the framework of the Compact Light XLS project, we have designed a higher harmonic RF accelerating structure in order to linearize the longitudinal space phase. The design of this compact ...Traveling Wave (TW) accelerating structure operating on the third harmonic with respect to the linac frequency (11.994 GHz) with a (100-125) MV/m accelerating gradient is presented, together with numerical electromagnetic simulations were carried out by using the numerical codes High Frequency Structure Simulator (HFSS) and CST Particle Studio.
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high ...gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV m−1. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 m. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by 50 nm-rad normalized emittances. The emittance, we note, is the effective area in transverse phase space (x, p x /m e c) or (y, p y /m e c) occupied by the beam distribution, and it is relevant to achievable beam sizes as well as setting a limit on FEL wavelength. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine-including the imaging of virus particles-which may profit from this new model of performing XFEL science.
Abstract
Space charge forces represent main induced effects in an RF-injector that degrade the beam quality. In this scenario the laser distribution sent on the photocathode acquires an important ...role in the emittance compensation process, as the slice analysis shows. Starting from the preliminary studies performed on 1, a novel semi-analytical model of space charge forces is proposed in detail for bunch with arbitrary charge distribution to derive expressions of self-induced forces. The performance of the fields at low energy regime (as the field has not expired RF forces) is under present analysis, we can investigate use of this model in low charge regime. Further, the model has been bench-marked with the behavior of the distributions present in the literature and studied for new ones. It has also been applied for the study of the optimization of a C-band hybrid photoinjector now being commissioned, thus explaining the factor two reduction of the emittance observed at the exit of the gun by changing the initial distribution at the cathode.
Ultra high-gradient accelerating structures are needed for the next generation of compact light sources. In the framework of the Compact Light XLS project, we are studying a high harmonic ...traveling-wave accelerating structure operating at a frequency of 35.982 GHz, in order to linearize the longitudinal space phase. In this paper, we propose a new analytical approach for the estimation of the group velocity in the structure and we compare it with numerical electromagnetic simulations that are carried out by using the code HFSS in the frequency domain.
Abstract
Flash Therapy is a revolution in cancer cure since it spares healthy tissue from the damage of ionization radiations without decreasing its effectiveness in tumor control. To allow the ...implementation of the FLASH therapy concept into actual clinical use and treat deep tumors, Very High Electron Energy (VHEE) should be achieved in a range of 50-150 MeV. In the framework of the VHEE project carried out at Sapienza University, in collaboration with INFN, we investigate the main issues in designing a compact C band (5.712 GHz) electron linacs for FLASH Radiotherapy. In this paper, we describe the design strategy, the electromagnetic properties, and the first prototypes of the RF structures to be tested at Sapienza University.
Linacs for high-energy physics, as well as for industry and medicine, require accelerating structures which are compact, robust, and cost-effective. Small foot-print linacs require high-accelerating ...gradients. Currently, stable-operating gradients, exceeding100MV/m, have been demonstrated at SLAC National Accelerator Laboratory, CERN, and KEK at X-band frequencies. Recent experiments show that accelerating cavities made out of hard copper alloys achieve better high-gradient performance as compared with soft copper cavities. In the scope of a decade-long collaboration between SLAC, INFN-Frascati, and KEK on the development of innovative high-gradient structures, this particular study focuses on the technological developments directed to show the viability of novel welding techniques. Two novel X-band accelerating structures, made out of hard copper, were fabricated at INFN-Frascati by means of clamping and welding. One cavity was welded with the electron beam and the other one with the tungsten inert gas welding process. In the technological development of the construction methods of high-gradient accelerating structures, high-power testing is a critical step for the verification of their viability. Here, we present the outcome of this step—the results of the high-power rf tests of these two structures. These tests include the measurements of the breakdown rate probability used to characterize the behavior of vacuum rf breakdowns, one of the major factors limiting the operating accelerating gradients. The electron beam welded structure demonstrated accelerating gradients of90MV/mat a breakdown rate of10−3/(pulsemeter)using a shaped pulse with a 150 ns flat part. Nevertheless, it did not achieve its ultimate performance because of arcing in the mode launcher power coupler. On the other hand, the tungsten inert gas welded structure reached its ultimate performance and operated at about a150MV/mgradient at a breakdown rate of10−3/(pulsemeter)using a shaped pulse with a 150 ns flat part. The results of both experiments show that welding, a robust, and low-cost alternative to brazing or diffusion bonding, is viable for high-gradient operation. This approach enables the construction of multicell standing and traveling-wave accelerating structures.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UL, UM, UPUK
High energy physics experiments using particle accelerators as well as industrial and medical applications are continuously seeking more compact, robust and cheaper accelerating structures. As of ...today, stable operating gradients, exceeding 100 MV/m, have been demonstrated by the SLAC group in the X-Band (11.424 GHz). These experiments show that hard structures, fabricated without high-temperature processes, achieve a better high gradient performance in terms of accelerating gradients. Therefore, we present an innovative and compact type of accelerating cavity that avoids any high-temperature processes like brazing or diffusion bonding. All cells are joined together by means of specifically designed and proprietary screws which ensure good vacuum and RF contacts. Two three-cell standing-wave accelerating structures, designed to operate in the pi-mode at 11.424 GHz, have been successfully built and cold tested. In order to guarantee a vacuum envelope and mechanically robust assembly, we used the Electron Beam Welding (EBW) and the Tungsten Inert Gas (TIG) processes. This work has been carried out in the framework of a funded project by the Vth Committee of the INFN for the Laboratori Nazionali di Frascati (LNF), within a large international collaboration between LNF, SLAC and KEK for the development of X-Band accelerating cavities using “hard structure” technology.
Technological advancements are strongly required to fulfil demands for new accelerators devices from the compact or portable devices for radiotherapy to mobile cargo inspections and security, ...biology, energy and environmental applications, and ultimately for the next generation of colliders. New manufacturing techniques for hard-copper structures are being investigated in order to determine the maximum sustainable gradients around 150 MV/m and extremely low probability of RF breakdown. In this paper, the initial studies on the RF and mechanical design for a compact Ka-Band accelerating structure are presented as well as preliminary beam dynamics estimations.
Abstract
High brightness electron beams enable a wide spectrum of applications ranging from short wavelength radiation sources to high gradient wakefield acceleration. The rich dynamics that are ...intrinsic in charged particles accelerated in complex systems require a careful description in the analysis and design of a given machine, particularly regarding its stability. Numerous computer codes are in use by the accelerator community for such purposes. In particular, MILES is a simple tracking code we have developed that allows fast evaluations of collective effects in RF linacs. In this paper we extend the simple models previously developed to describe specific, diverse applications that can benefit from the fast simulation tools developed in MILES. Examples of this kind include particle driven acceleration schemes in a plasma where driver and witness beams propagate in the “comb” pulse-train configuration. Specifically, we investigate the self-induced fields excited within the X-band rf-linac stage of EuPRAXIA@SPARC_LAB. Further, we discuss additional advanced topics such as resistive wall wakefield effects in planar FEL undulators and their impact on the radiation emitted.
PDF
