Additive manufacturing, often known as three-dimensional (3D) printing, is a process in which a part is built layer-by-layer and is a promising approach for creating components close to their final ...(net) shape. This process is challenging the dominance of conventional manufacturing processes for products with high complexity and low material waste
. Titanium alloys made by additive manufacturing have been used in applications in various industries. However, the intrinsic high cooling rates and high thermal gradient of the fusion-based metal additive manufacturing process often leads to a very fine microstructure and a tendency towards almost exclusively columnar grains, particularly in titanium-based alloys
. (Columnar grains in additively manufactured titanium components can result in anisotropic mechanical properties and are therefore undesirable
.) Attempts to optimize the processing parameters of additive manufacturing have shown that it is difficult to alter the conditions to promote equiaxed growth of titanium grains
. In contrast with other common engineering alloys such as aluminium, there is no commercial grain refiner for titanium that is able to effectively refine the microstructure. To address this challenge, here we report on the development of titanium-copper alloys that have a high constitutional supercooling capacity as a result of partitioning of the alloying element during solidification, which can override the negative effect of a high thermal gradient in the laser-melted region during additive manufacturing. Without any special process control or additional treatment, our as-printed titanium-copper alloy specimens have a fully equiaxed fine-grained microstructure. They also display promising mechanical properties, such as high yield strength and uniform elongation, compared to conventional alloys under similar processing conditions, owing to the formation of an ultrafine eutectoid microstructure that appears as a result of exploiting the high cooling rates and multiple thermal cycles of the manufacturing process. We anticipate that this approach will be applicable to other eutectoid-forming alloy systems, and that it will have applications in the aerospace and biomedical industries.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Very‐low‐energy diets (VLEDs) and ketogenic low‐carbohydrate diets (KLCDs) are two dietary strategies that have been associated with a suppression of appetite. However, the results of clinical trials ...investigating the effect of ketogenic diets on appetite are inconsistent. To evaluate quantitatively the effect of ketogenic diets on subjective appetite ratings, we conducted a systematic literature search and meta‐analysis of studies that assessed appetite with visual analogue scales before (in energy balance) and during (while in ketosis) adherence to VLED or KLCD. Individuals were less hungry and exhibited greater fullness/satiety while adhering to VLED, and individuals adhering to KLCD were less hungry and had a reduced desire to eat. Although these absolute changes in appetite were small, they occurred within the context of energy restriction, which is known to increase appetite in obese people. Thus, the clinical benefit of a ketogenic diet is in preventing an increase in appetite, despite weight loss, although individuals may indeed feel slightly less hungry (or more full or satisfied). Ketosis appears to provide a plausible explanation for this suppression of appetite. Future studies should investigate the minimum level of ketosis required to achieve appetite suppression during ketogenic weight loss diets, as this could enable inclusion of a greater variety of healthy carbohydrate‐containing foods into the diet.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Eukaryotic chromatin is highly condensed but dynamically accessible to regulation and organized into subdomains. We demonstrate that reconstituted chromatin undergoes histone tail-driven ...liquid-liquid phase separation (LLPS) in physiologic salt and when microinjected into cell nuclei, producing dense and dynamic droplets. Linker histone H1 and internucleosome linker lengths shared across eukaryotes promote phase separation of chromatin, tune droplet properties, and coordinate to form condensates of consistent density in manners that parallel chromatin behavior in cells. Histone acetylation by p300 antagonizes chromatin phase separation, dissolving droplets in vitro and decreasing droplet formation in nuclei. In the presence of multi-bromodomain proteins, such as BRD4, highly acetylated chromatin forms a new phase-separated state with droplets of distinct physical properties, which can be immiscible with unmodified chromatin droplets, mimicking nuclear chromatin subdomains. Our data suggest a framework, based on intrinsic phase separation of the chromatin polymer, for understanding the organization and regulation of eukaryotic genomes.
Display omitted
•Chromatin undergoes liquid-liquid phase separation (LLPS) under physiologic conditions•Linker DNA length and patterning, histone H1, and acetylation modulate chromatin LLPS•Acetylated chromatin only phase separates upon binding multi-bromodomain proteins•LLPS could enable establishment and maintenance of distinct chromatin compartments
Properties inherent to chromatin, including nucleosomal spacing, allow it to phase separate within the nucleoplasm, and this ability can be further modulated by regulatory factors.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Dye-sensitized solar cells strike back Muñoz-García, Ana Belén; Benesperi, Iacopo; Boschloo, Gerrit ...
Chemical Society reviews,
11/2021, Volume:
5, Issue:
22
Journal Article
Peer reviewed
Open access
Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and ...dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.
Dye-sensitized solar cells (DSCs) are celebrating their 30
th
birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. Righteous font designed by Astigmatic and licensed under the Open Font License.
Anadromous alewives (Alosa pseudoharengus) are abundant in the Canadian Maritimes, where they support lucrative commercial fisheries. Little is known about their coastal movement, and their potential ...to interact with anthropogenic structures. Acoustic telemetry can provide detailed information on the spatiotemporal distribution and survival of fishes in coastal areas, using information transmitted from tagged fishes and recorded by moored receivers. However, few acoustic telemetry studies have been performed on clupeids as they are extremely sensitive to handling, and are often compromised by surgical tag implantation. This research assesses the feasibility of a surgical tagging protocol using novel High Residency acoustic tags in alewives, and establishes a baseline of short-term tagging effects. Alewives from the Gaspereau River population were tagged between 2018 (n = 29) and 2019 (n = 96) with non-transmitting models of Vemco/Innovasea V5 HR tags. Tagging effects were evaluated based on recovery rate, reflex impairment, and necropsy-based health assessments. Alewives responded well to tagging, with low mortality (3%) and no observed instances of tag shedding 72 hours post-surgery. The use of sutures to close the incision site had no effect on recovery times. Water temperature and spawning condition had the greatest effect on the behavioural response of fish to tagging. Our findings suggest that, with proper handling and smaller acoustic tags, telemetry studies on alewives are feasible.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The rapidly growing field of nanoscale lasers can be advanced through the discovery of new, tunable light sources. The emission wavelength tunability demonstrated in perovskite materials is an ...attractive property for nanoscale lasers. Whereas organic–inorganic lead halide perovskite materials are known for their instability, cesium lead halides offer a robust alternative without sacrificing emission tunability or ease of synthesis. Here, we report the low-temperature, solution-phase growth of cesium lead halide nanowires exhibiting low-threshold lasing and high stability. The as-grown nanowires are single crystalline with well-formed facets, and act as high-quality laser cavities. The nanowires display excellent stability while stored and handled under ambient conditions over the course of weeks. Upon optical excitation, Fabry–Pérot lasing occurs in CsPbBr₃ nanowires with an onset of 5 μJ cm−2 with the nanowire cavity displaying a maximum quality factor of 1,009 ± 5. Lasing under constant, pulsed excitation can be maintained for over 1 h, the equivalent of 10⁹ excitation cycles, and lasing persists upon exposure to ambient atmosphere. Wavelength tunability in the green and blue regions of the spectrum in conjunction with excellent stability makes these nanowire lasers attractive for device fabrication.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK
Grain boundary embrittlement occurs when a solute enriches at a grain boundary and lowers its cohesive energy. While grain boundary enrichment is often attributed to equilibrium segregation effects, ...most models of embrittlement consider either the energetics of decohesion or the equilibrium adsorption at the boundary, but not both phenomena together. We develop a model for the change in cohesive energy of a grain boundary of a pure metal upon introduction of solute under conditions of equilibrium segregation prior to fracture. A heuristic grain boundary cohesion map is presented to delineate whether a given solute–solvent pair will exhibit weakening or strengthening of grain boundaries. The analysis helps to clarify that grain boundary embrittlement requires a solute that will both lower the cohesive energy of the boundary and segregate in the first place. The map reasonably captures known metal–metal embrittling pairs.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. Composites are used in almost every conceivable application, although ...the high flammability and poor fire resistance of these materials remains a critical issue. The book covers all of the key issues on the behaviour of composites in a fire, including thermal degradation mechanisms, thermal softening, fire damage mechanics, and deterioration of mechanical properties. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites. This book will be of great interest to professionals in the composites industry, fire safety engineers, researchers in the fire properties of materials, and the users of composites in the aerospace, marine, civil infrastructure and automotive industries.
Full text
Available for:
FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NUK, OBVAL, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Abstract The Janus Kinase/Signal Transducers and Activators of Transcription (JAK/STAT) signaling pathway is utilized by numerous cytokines and interferons, and is essential for the development and ...function of both innate and adaptive immunity. Aberrant activation of the JAK/STAT pathway is evident in neuroinflammatory diseases such as Multiple Sclerosis and Parkinson's Disease. Innate immunity is the front line defender of the immune system and is composed of various cell types, including microglia, macrophages and neutrophils. Innate immune responses have both pathogenic and protective roles in neuroinflammation, depending on disease context and the microenvironment in the central nervous system. In this review, we discuss the role of innate immunity in the pathogenesis of neuroinflammatory diseases, how the JAK/STAT signaling pathway regulates the innate immune response, and finally, the potential for ameliorating neuroinflammation by utilization of JAK/STAT inhibitors.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Dye-sensitized solar cells (DSCs) with cobalt-based mediators with efficiencies surpassing the record for DSCs with iodide-free electrolytes were developed by selecting a suitable combination of a ...cobalt polypyridine complex and an organic sensitizer. The effect of the steric properties of two triphenylamine-based organic sensitizers and a series of cobalt polypyridine redox mediators on the overall device performance in DSCs as well as on transport and recombination processes in these devices was compared. The recombination and mass-transport limitations that, previously, have been found to limit the performance of these mediators were avoided by matching the properties of the dye and the cobalt redox mediator. Organic dyes with higher extinction coefficients than the standard ruthenium sensitizers were employed in DSCs in combination with outer-sphere redox mediators, enabling thinner TiO2 films to be used. Recombination was reduced further by introducing insulating butoxyl chains on the dye rather than on the cobalt redox mediator, enabling redox couples with higher diffusion coefficients and more suitable redox potential to be used, simultaneously improving the photocurrent and photovoltage of the device. Optimization of DSCs sensitized with a triphenylamine-based organic dye in combination with tris(2,2′-bipyridyl)cobalt(II/III) yielded solar cells with overall conversion efficiencies of 6.7% and open-circuit potentials of more than 0.9 V under 1000 W m−2 AM1.5 G illumination. Excellent performance was also found under low light intensity indoor conditions.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
PDF
