The article establishes the objective function of distributed electronic and electrical architecture from three dimensions of economy, quantization and loadability, and constructs a mathematical ...model for multi-objective optimization based on the satisfaction of constraints. The model was applied and tested in the intelligent control system of automotive industrial equipment. In practical applications, the intelligent control system can automatically reduce the speed to 16km/h to maintain a safe distance and prevent collision when the target vehicle is monitored to enter the lane it is in and the distance between the two cars is less than 30 meters. Under 1500 pcu/h traffic flow conditions, the average delays of vehicles at the intersection through intelligent control were only 8.06 seconds and 8.02 seconds, compared to 20.58 seconds and 23.29 seconds for vehicles under conventional control. Vehicle intelligent control systems based on distributed electronic and electrical architectures have great potential for development and significant safety performance improvement in automotive industrial equipment manufacturing. The research in this paper provides a new perspective and adequate technical support for the intelligent control of future industrial equipment.
This paper discusses the critical impact of informatization automation on plant automation, and takes a water plant’s coagulation dosing automation control system as an example to explore the value ...of integrated wireless modules in the automation of electrical equipment. Algorithms for directly identifying the parameters of the second-order continuous model by regression model and based on the step response data are investigated, as well as the selection of the DMC algorithm for mathematical modeling of the coagulation dosing automation control. Finally, the effectiveness of the automated dosing system was verified by comparing its effectiveness in improving the qualified rate of precipitation water quality, reducing drug consumption and effluent turbidity, and improving stability. The study’s results showed that after using the coagulation dosing automation system, the water plant’s sedimentation water quality pass rate was increased from the original 85%~95% to 95%~100%. The drug consumption and effluent turbidity were reduced by 20.3% and 33.09% respectively, while the stability was also improved to different degrees. The coagulation dosing automated control system can dosage chemicals more accurately, safely and stably, which has specific reference value for developing the water purification industry.
Thermoelectric materials can be used to directly convert heat into electricity. Superior thermoelectric performance has been achieved either via reducing the lattice thermal conductivity or via ...enhancing the power factor.
Display omitted
Thermoelectric materials can be used in direct conversion of heat to electricity and vice versa. The past decade has witnessed the rapid growth of thermoelectric research, targeting high thermoelectric performance either via reduction in the lattice thermal conductivity or via enhancement of the power factor. In this review, we firstly summarize the recent advances in bulk thermoelectric materials with reduced lattice thermal conductivity by nano-microstructure control and also newly discovered materials with intrinsically low lattice thermal conductivity. We then discuss ways to enhance the electron transport abilities for achieving higher power factor by both novel and traditional methods. Finally, we highlight the recent development in single-crystal thermoelectric materials. These strategies are successful in synergistically manipulating the thermal conductivity and electron transport properties, which have significantly advanced thermoelectric performance on materials. For device applications on these high-performance materials, new opportunities may arise though stability, electrode contacts, mechanical properties, and other problems need to be solved in the near future.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Display omitted
•4 μm and 10 μm PS-MPs could accumulate in testis of mice.•Sperm quality and testosterone level of mice were declined after exposure to 0.5 μm, 4 μm, and 10 μm PS-MPs.•PS-MPs induced ...testicular inflammation and the disruption of blood-testis barrier.
Microplastics (MPs) have become hazardous materials, which have aroused widespread concern about their potential toxicity. However, the effects of MPs on reproductive systems in mammals are still ambiguous. In this study, the toxic effects of polystyrene MPs (PS-MPs) in male reproduction of mice were investigated. The results indicated that after exposure for 24 h, 4 μm and 10 μm PS-MPs accumulated in the testis of mice. Meanwhile, 0.5 μm, 4 μm, and 10 μm PS-MPs could enter into three kinds of testicular cells in vitro. In addition, sperm quality and testosterone level of mice were declined after exposure to 0.5 μm, 4 μm, and 10 μm PS-MPs for 28 days. H&E staining showed that spermatogenic cells abscissed and arranged disorderly, and multinucleated gonocytes occurred in the seminiferous tubule. Moreover, PS-MPs induced testicular inflammation and the disruption of blood-testis barrier. In summary, this study demonstrated that PS-MPs induced male reproductive dysfunctions in mice, which provided new insights into the toxicity of MPs in mammals.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
We report an Ag1 single‐atom catalyst (Ag1/MnO2), which was synthesized from thermal transformation of Ag nanoparticles (NPs) and surface reconstruction of MnO2. The evolution process of Ag NPs to ...single atoms is firstly revealed by various techniques, including in situ ETEM, in situ XRD and DFT calculations. The temperature‐induced surface reconstruction process from the MnO2 (211) to (310) lattice plane is critical to firmly confine the existing surface of Ag single atoms; that is, the thermal treatment and surface reconstruction of MnO2 is the driving force for the formation of single Ag atoms. The as‐obtained Ag1/MnO2 achieved 95.7 % Faradic efficiency at −0.85 V vs. RHE, and coupled with long‐term stability for electrochemical CO2 reduction reaction (CO2RR). DFT calculations indicated single Ag sites possessed high electronic density close to Fermi Level and could act exclusively as the active sites in the CO2RR. As a result, the Ag1/MnO2 catalyst demonstrated remarkable performance for the CO2RR, far surpassing the conventional Ag nanosized catalyst (AgNP/MnO2) and other reported Ag‐based catalysts.
Silver nanoparticles converted into single atoms bring about a significant improvement in electrocatalytic CO2 reduction with a 95.7 % faradic efficiency for CO production.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
The microstructure, thermal and mechanical stability of Ni-based single crystalline superalloys depend strongly on the alloying elements and their concentrations. Alloying has been the main design ...strategy for stabilizing the compositions, microstructures and thermal-mechanical properties. This article presents a review on the effects of some common alloying elements on the microstructural and mechanical property stability control of Ni-based superalloys. The various alloying elements are divided into four categories according to their main effects on these properties, comprising base elements, mechanical strengthening elements, long term stability elements and the oxidation resistance elements. The mechanical strengthening elements can further be divided into precipitation, solid solution and grain boundary segregation elements. The precipitation elements strengthen the alloys by forming the L12 structured γʹ phase. The solid solution elements strengthen primarily the γ phase, by increasing the solidus temperatures and decreasing the stacking fault energy, which in turn influences the thermal stability of the phases and the resistance of dislocation movement. The grain boundary elements strengthen the alloys by the formation of carbides and borides along the grain boundaries during solidification, which help to prevent the formation of casting pores and hot tearing and to strengthen low angle boundaries. The long-term stability elements inhibit the precipitation of topologically closed-packed phases causing deterioration of the mechanical properties. The oxidation resistance element, mainly Al, promotes the formation of protective Al2O3 surface layer.
•Various alloying elements are clarified based on their effects to the alloys.•The different effects of solid solution elements are clarified.•The strengthen mechanisms of grain boundary elements are explained.•The misfit and microstructure can be adjusted by adjusting the composition.•The long term stability element inhibits the precipitation of TCP phase.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Ceramic/polymer composite equipped with 3D interlocking skeleton (3D IL) is developed through a simple freeze‐casting method, exhibiting exceptionally light weight, high strength, toughness, and ...shock resistance. Long‐range crack energy dissipation enabled by 3D interlocking structure is considered as the primary reinforcing mechanism for such superior properties. The smart composite design strategy should hold a place in developing future structural engineering materials.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Grain rotation is a well-known phenomenon during high (homologous) temperature deformation and recrystallization of polycrystalline materials. In recent years, grain rotation has also been proposed ...as a plasticity mechanism at low temperatures (for example, room temperature for metals), especially for nanocrystalline grains with diameter d less than ~15 nm. Here, in tensile-loaded Pt thin films under a high-resolution transmission electron microscope, we show that the plasticity mechanism transitions from cross-grain dislocation glide in larger grains (d>6 nm) to a mode of coordinated rotation of multiple grains for grains with d<6 nm. The mechanism underlying the grain rotation is dislocation climb at the grain boundary, rather than grain boundary sliding or diffusional creep. Our atomic-scale images demonstrate directly that the evolution of the misorientation angle between neighbouring grains can be quantitatively accounted for by the change of the Frank-Bilby dislocation content in the grain boundary.
Developing ultra-high strength in rare-earth-free Mg alloys using conventional extrusion process is a great challenge. What is even more difficult is to achieve such a goal at a lower processing ...cost. In this work, we report a novel low-alloyed Mg-2Sn-2Ca alloy (in wt. %) that exhibits tunable ultra-high tensile yield strength (360–440 MPa) depending on extrusion parameters. More importantly, there is little drop in mechanical properties of this alloy even when it is extruded at a speed several times higher than those used in the reported high strength Mg alloys. Examination of as-extruded microstructures of this Ca-containing Mg alloy reveals that the ultra-high strength is mainly associated with the presence of surprisingly submicron matrix grains (down to ∼0.32 μm). The results suggest that the Ca addition promotes accumulations of the pyramidal dislocations, which eventually transform into the low angular grain boundaries (LAGBs). The high number density of LAGBs separate the α-Mg matrix via either discontinuous dynamic recrystallization (DDRX) mechanism in the early stage or the continuous dynamic recrystallization (CDRX) mechanism in the later stage of extrusion, which effectively enhances the nucleation rates of the DRXed grains. More importantly, large amount of Ca segregation along LAGBs, accompanied with dynamically precipitated Mg2Ca nano-phases, are detected in the present non-severely deformed samples. It is the combination of solute segregations and numerous Mg2Ca nano-precipitates that contributes to the formation of the ultra-fine grains via pinning mechanism. The ultrafine grains size, Ca enrichment in most LAGBs, and residual Mg2Ca nano-precipitates would in turn contribute significantly to the enhancement of the yield strength of the as-extruded Mg-2Sn-2Ca (wt.%) alloy. The low content of alloying elements and the fast one-step extrusion process render the present alloys low-cost and thus have great potential in large-scale industry applications.
Display omitted
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Abstract
Non-conservative dislocation climb plays a unique role in the plastic deformation and creep of crystalline materials. Nevertheless, the underlying atomic-scale mechanisms of dislocation ...climb have not been explored by direct experimental observations. Here, we report atomic-scale observations of grain boundary (GB) dislocation climb in nanostructured Au during in situ straining at room temperature. The climb of a edge dislocation is found to occur by stress-induced reconstruction of two neighboring atomic columns at the edge of an extra half atomic plane in the dislocation core. This is different from the conventional belief of dislocation climb by destruction or construction of a single atomic column at the dislocation core. The atomic route of the dislocation climb we proposed is demonstrated to be energetically favorable by Monte Carlo simulations. Our in situ observations also reveal GB evolution through dislocation climb at room temperature, which suggests a means of controlling microstructures and properties of nanostructured metals.
PDF
