This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron ...Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
► In this study we use ASTER data for porphyry copper exploration. ► We identify vegetation, iron oxide, clay minerals using ASTER data in regional scale. ► Spectral mapping methods using ASTER SWIR ...data discriminate alteration minerals. ► The techniques identify new prospects of copper mineralization in the study areas.
The NW–SE trending Central Iranian Volcanic Belt hosts many well-known porphyry copper deposits in Iran. It becomes an interesting area for remote sensing investigations to explore the new prospects of porphyry copper and vein type epithermal gold mineralization. Two copper mining districts in southeastern segment of the volcanic belt, including Meiduk and Sarcheshmeh have been selected in the present study. The performance of Principal Component Analysis, band ratio and Minimum Noise Fraction transformation has been evaluated for the visible and near infrared (VNIR) and, shortwave infrared (SWIR) subsystems of ASTER data. The image processing techniques indicated the distribution of iron oxides and vegetation in the VNIR subsystem. Hydrothermal alteration mineral zones associated with porphyry copper mineralization identified and discriminated based on distinctive shortwave infrared (SWIR) properties of the ASTER data in a regional scale. These techniques identified new prospects of porphyry copper mineralization in the study areas. The spatial distribution of hydrothermal alteration zones has been verified by in situ inspection, X-ray diffraction (XRD) analysis, and spectral reflectance measurements. Results indicated that the integration of the image processing techniques has a great ability to obtain significant and comprehensive information for the reconnaissance stages of porphyry copper exploration in a regional scale. The results of this research can assist exploration geologists to find new prospects of porphyry copper and gold deposits in the other virgin regions before costly detailed ground investigations. Consequently, the introduced image processing techniques can create an optimum idea about possible location of the new prospects.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Display omitted
•Poorly exposed lithologies and alteration minerals are mapped in the Antarctic environments.•A satellite-based remote sensing approach is used for mineral exploration in inaccessible ...regions.•Landsat-8 and ASTER satellite data are used for discovering poorly mapped or unmapped regions.•The image processing approach used is useful for mineral exploration in inaccessible regions.
Antarctica remains a remote and logistically difficult region to conduct geological field mapping and mineral exploration. Remote sensing satellite imagery has high potential to provide a solution to overcome the difficulties and limitations associated with geological field mapping and mineral exploration in inaccessible regions. In this study, the applications of Landsat-8 and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data were investigated to extract geological information for lithological and alteration mineral mapping in poorly exposed lithologies located in inaccessible regions. The north-eastern Graham Land, Antarctic Peninsula (AP) was selected in this study to conduct a satellite-based remote sensing mapping approach. A two-stage methodology was adopted to distinguish pixel and sub-pixel targets in the satellite images. In the first stage, Continuum Removal (CR) spectral mapping tool and Independent Components Analysis (ICA) technique were applied to Landsat-8 and ASTER spectral bands to map the pixels related to poorly exposed lithological units. The second step was established based on the application of target detection algorithms to shortwave infrared bands of ASTER for detecting spectral features attributed to alteration mineral assemblages at the sub-pixel level. Pixels composed of distinctive absorption features of alteration mineral assemblages and Si-O bond emission minima features were detected by applying CR mapping tool to reflective and thermal bands of Landsat-8 and ASTER. Anomaly pixels related to spectral features of Al-O–H, Fe, Mg-O–H and CO3 groups as well as lithological attributions from felsic to mafic rocks were detected by the implementation of ICA technique to reflective and thermal bands of Landsat-8 and ASTER. ICA method provided image maps of alteration mineral assemblages and lithological units (mafic to felsic trend) for poorly mapped and/or unmapped regions. Fractional abundance of alteration minerals such as muscovite, kaolinite, illite, montmorillonite, epidote, chlorite and biotite were detected in poorly exposed lithologies using target detection algorithms. Several prospecting areas for Cu, Mo, Au and Ag mineralization related to propyllitically and argillically altered units of Andean Intrusive Suite (AIS) were identified in the southern sector of the study region. The results of this investigation demonstrated the applicability of Landsat-8 and ASTER spectral data for lithological and alteration mineral mapping in poorly exposed lithologies located in inaccessible regions, particularly using the image processing algorithms that are capable of detecting anomaly pixels and sub-pixel targets in the remotely sensed images, where no prior information is available. In conclusion, a simple and robust satellite-based remote sensing approach for mapping poorly exposed lithologies in inaccessible regions was established, which is comprehensively applicable for lithological and alteration mineral mapping in the Antarctic environments and hydrothermal ore minerals prospecting in other inaccessible regions around the world.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The Central Gold Belt (CGB) of Peninsular Malaysia has been investigated to map structural elements associated with gold mineralization using the Phased Array type L-band Synthetic Aperture Radar ...(PALSAR) satellite remote sensing data. Gold mineralization in this belt is structurally controlled and associated with steeply dipping faults and fold hinges. Adaptive local sigma and directional filters were applied to PALSAR data for tracing structural elements associated with gold mineralization. Structural features along the Bentong–Raub Suture Zone have been identified as highly potential areas for gold prospecting. Four sets of lineaments trending N–S, NE–SW, NNW–SSE and ESE–WNW were identified. Results of this study demonstrate the applicability of PALSAR remote sensing data to assist gold exploration in the CGB particularly in reducing costs related to exploration for epithermal and polymetallic vein-type mineralization in tropical environments.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Vulnerability assessment is one of the prerequisites for risk analysis in disaster management. Vulnerability to earthquakes, especially in urban areas, has increased over the years due to the ...presence of complex urban structures and rapid development. Urban vulnerability is a result of human behavior which describes the extent of susceptibility or resilience of social, economic, and physical assets to natural disasters. The main aim of this paper is to develop a new hybrid framework using Analytic Network Process (ANP) and Artificial Neural Network (ANN) models for constructing a composite social, economic, environmental, and physical vulnerability index. This index was then applied to Tabriz City, which is a seismic-prone province in the northwestern part of Iran with recurring devastating earthquakes and consequent heavy casualties and damages. A Geographical Information Systems (GIS) analysis was used to identify and evaluate quantitative vulnerability indicators for generating an earthquake vulnerability map. The classified and standardized indicators were subsequently weighed and ranked using an ANP model to construct the training database. Then, standardized maps coupled with the training site maps were presented as input to a Multilayer Perceptron (MLP) neural network for producing an Earthquake Vulnerability Map (EVM). Finally, an EVM was produced for Tabriz City and the level of vulnerability in various zones was obtained. South and southeast regions of Tabriz City indicate low to moderate vulnerability, while some zones of the northeastern tract are under critical vulnerability conditions. Furthermore, the impact of the vulnerability of Tabriz City on population during an earthquake was included in this analysis for risk estimation. A comparison of the result produced by EVM and the Population Vulnerability (PV) of Tabriz City corroborated the validity of the results obtained by ANP-ANN. The findings of this paper are useful for decision-makers and government authorities to obtain a better knowledge of a city’s vulnerability dimensions, and to adopt preparedness strategies in the future for Tabriz City. The developed hybrid framework of ANP and ANN Models can easily be replicated and applied to other urban regions around the world for sustainability and environmental management.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Geological mapping is one of the primary tasks of remote sensing. Remote sensing applications are especially useful when extreme environmental conditions inhibit direct survey such as in Antarctica. ...In this investigation, a satellite-based remote sensing approach was used for mapping alteration mineral zones and lithological units using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data in the Oscar II coast area, north-eastern Graham Land, Antarctic Peninsula. Specialized band ratios and band combinations were developed using visible and near infrared, shortwave infrared (SWIR) and thermal infrared spectral bands of ASTER for detecting alteration mineral assemblages and lithological units in Antarctic environments. Constrained Energy Minimization, Orthogonal Subspace Projection and Adaptive Coherence Estimator algorithms were tested to ASTER SWIR bands for detecting sub-pixels' abundance of spectral features related to muscovite, kaolinite, illite, montmorillonite, epidote, chlorite and biotite. Results indicate valuable applicability of ASTER data for Antarctic geological mapping.
Full text
Available for:
BFBNIB, GIS, IJS, KISLJ, NUK, PNG, UL, UM, UPUK
Fusion and analysis of thematic information layers using machine learning algorithms provide an important step toward achieving accurate mineral potential maps in the reconnaissance stage of mineral ...exploration. This study developed the Neuro-Fuzzy-AHP (NFAHP) technique for fusing remote sensing (i.e., ASTER alteration mineral image-maps) and geological datasets (i.e., lithological map, geochronological map, structural map, and geochemical map) to identify high potential zones of volcanic massive sulfide (VMS) copper mineralization in the Sahlabad mining area, east Iran. Argillic, phyllic, propylitic and gossan alteration zones were identified in the study area using band ratio and Selective Principal Components Analysis (SPCA) methods implemented to ASTER VNIR and SWIR bands. For each of the copper deposits, old mines and mineralization indices in the study area, information related to exploration factors such as ore mineralization, host-rock lithology, alterations, geochronological, geochemistry, and distance from high intensity lineament factor communities were investigated. Subsequently, the predictive power of these factors in identifying copper occurrences was evaluated using Back Propagation Neural Network (BPNN) technique. The BPNN results demonstrated that using the exploration factors, copper mineralizations in Sahlabad mining area could be identified with high accuracy. Lastly, using the Fuzzy-Analytic Hierarchy Process (Fuzzy-AHP) method, information layers were weighted and fused. As a result, a potential map of copper mineralization was generated, which pinpointed several high potential zones in the study area. For verification of the results, the documented copper deposits, old mines, and mineralization indices in the study area were plotted on the potential map, which is particularly appearing in high favorability parts of the potential map. In conclusion, the Neuro-Fuzzy-AHP (NFAHP) technique shows great reliability for copper exploration in the Sahlabad mining area, and it can be extrapolated to other metallogenic provinces in Iran and other regions for the reconnaissance stage of mineral exploration.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
In recent decades, multispectral and hyperspectral remote sensing data provide unprecedented opportunities for the initial stages of mineral exploration and environmental hazard monitoring ...
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Satellite remote sensing is an advanced tool used to characterize seagrass biomass and monitor changes in clear to less-turbid waters by analyzing multi-temporal satellite images. Seagrass ...information was extracted from the multi-temporal satellite datasets following a two-step procedure: (i) retrieval of substrate-leaving radiances; and (ii) estimation of seagrass total aboveground biomass (STAGB). Firstly, the substrate leaving radiances is determined by compensating the water column correction of the pre-processed data because of the inherent errors associated with the geometric and radiometric fidelities including atmospheric perturbations. Secondly, the seagrass leaving radiances were correlated to the corresponding in situ STAGB to predict seagrass biomass. The relationship between STAGB and cover percentage was then established for seagrass meadows occurring in Merambong, Straits of Johor, Malaysia. By applying the above-mentioned approach on Landsat Thematic Mapper (TM) acquired in 2009 and Operational Land Imager (OLI) data acquired in 2013, the resulting maps indicated that submerged STAGB in less clear water can be successfully quantified empirically from Landsat data, and can be utilized in STAGB change detection over time. Data validation showed a good agreement between in situ STAGB and Landsat TM (R2 = 0.977, p < 0.001) and OLI (R2 = 0.975, p < 0.001) derived water leaving radiances for the studied seagrass meadows. The STAGB was estimated as 803 plus or minus 0.47 kg in 2009, while it was 752.3 plus or minus 0.34 kg in 2013, suggesting a decrease of 50.7 kg within the four-year interval. This could be mainly due to land reclamation in the intertidal mudflat areas performed, with a view to increase port facilities and coastal landscape development. Statistics on dugong sightings also supports changes in STAGB.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Remote sensing for geology in tropical environments is very challenging, because of the dense vegetation cover and the problem of persistent cloud cover. In this research paper, we have investigated ...and demonstrated the detection of hydrothermal alteration zones and structural elements associated with intrusion-related gold mineralization using various types of remote sensing data in the Bau gold mining district in the State of Sarawak, East Malaysia, on the island of Borneo. The climate of Bau is tropical with persistent cloud cover and very dense vegetation ground. Geological analyses coupled with remote sensing data were used to detect hydrothermally altered rocks and structural elements associated with gold mineralization in the Bau area. Landsat Enhanced Thematic Mapper+ (ETM+), Hyperion and Phased Array type L-band Synthetic Aperture Radar (PALSAR) data were used to carry out lithological–structural mapping of the mineralized zones in the study area and surrounding terrain. Hydrothermal alteration zones were detected along the SSW to NNE structural trend of the Tai Parit fault that corresponds with the occurrence of other gold mineralization in the Bau Limestone. The results show that the known gold prospects and potential areas of mineralization are recognizable by the methods used, despite limited bedrock exposure. The approach used in this study is broadly applicable to the detection of gold mineralization using ETM+, Hyperion and PALSAR data in tropical/sub-tropical regions.
•Satellite remote sensing data apply for geological applications in tropical regions.•Hydrothermal zones and structural elements are detectable with gold mineralization.•The approach is broadly applicable for gold exploration in the tropics.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK