Three-dimensional graphene network is a promising structure for improving both the mechanical properties and functional capabilities of reinforced polymer and ceramic matrix composites. However, ...direct application in a metal matrix remains difficult due to the reason that wetting is usually unfavorable in the carbon/metal system. Here we report a powder-metallurgy based strategy to construct a three-dimensional continuous graphene network architecture in a copper matrix through thermal-stress-induced welding between graphene-like nanosheets grown on the surface of copper powders. The interpenetrating structural feature of the as-obtained composites not only promotes the interfacial shear stress to a high level and thus results in significantly enhanced load transfer strengthening and crack-bridging toughening simultaneously, but also constructs additional three-dimensional hyperchannels for electrical and thermal conductivity. Our approach offers a general way for manufacturing metal matrix composites with high overall performance.
Copper nanoparticles coated graphene nanoplates reinforced Al (Cu-GNPs/Al) matrix composites were fabricated by the combination of low temperature ball milling (LTBM) and subsequent hot extrusion ...process. The as-obtained composite with 2.5 wt% Cu-GNPs showed excellent comprehensive properties, i.e. the tensile strength (402 MPa) is 130% higher than that of monolithic Al, meanwhile, the fracture elongation over 10% was maintained. It was found that compared with room temperature ball milling, the LTBM processing could improve the dispersion of graphene in the matrix remarkably and thus enhance the strength of the composites substantially. The introduction of Cu-GNPs weakened the fiber texture of the Al matrix but refined grains as well as reduced the thermal expansion coefficient of the composites. The coated Cu on the GNPs enriched at the interface and inhibited the severe interfacial reaction, which would enable the structural integrity retention of GNPs and improved the interfacial bonding strength and thus be very favorable for the load transfer between GNPs and Al matrix. In addition, two sizes of GNPs were found in the composites due to the ball milling processing, the larger-sized GNPs contributed a lot to the load transfer while the smaller ones contributed more to the Orowan strengthening.
Display omitted
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
A facile and scalable in situ synthesis strategy is developed to fabricate carbon-encapsulated Fe3O4 nanoparticles homogeneously embedded in two-dimensional (2D) porous graphitic carbon nanosheets ...(Fe3O4@C@PGC nanosheets) as a durable high-rate lithium ion battery anode material. With assistance of the surface of NaCl particles, 2D Fe@C@PGC nanosheets can be in situ synthesized by using the Fe(NO3)3·9H2O and C6H12O6 as the metal and carbon precursor, respectively. After annealing under air, the Fe@C@PGC nanosheets can be converted to Fe3O4@C@PGC nanosheets, in which Fe3O4 nanoparticles (∼18.2 nm) coated with conformal and thin onion-like carbon shells are homogeneously embedded in 2D high-conducting carbon nanosheets with a thickness of less than 30 nm. In the constructed architecture, the thin carbon shells can avoid the direct exposure of encapsulated Fe3O4 to the electrolyte and preserve the structural and interfacial stabilization of Fe3O4 nanoparticles. Meanwhile, the flexible and conductive PGC nanosheets can accommodate the mechanical stress induced by the volume change of embedded Fe3O4@C nanoparticles as well as inhibit the aggregation of Fe3O4 nanoparticles and thus maintain the structural and electrical integrity of the Fe3O4@C@PGC electrode during the lithiation/delithiation processes. As a result, this Fe3O4@C@PGC electrode exhibits superhigh rate capability (858, 587, and 311 mAh/g at 5, 10, and 20 C, respectively, 1 C = 1 A/g) and extremely excellent cycling performance at high rates (only 3.47% capacity loss after 350 cycles at a high rate of 10 C), which is the best one ever reported for an Fe3O4-based electrode including various nanostructured Fe3O4 anode materials, composite electrodes, etc.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Simultaneously achieving high strength and ductility is a critical issue for graphene reinforced aluminum matrix composites, which couldn't be resolved by the conventional mechanical milling-powder ...metallurgy technology due to the following reasons. On one hand, the low addition of graphene in the matrix traceable to its poor dispersibility limits the further strength improvement. On the other hand, the introduced graphene tends to distribute into grain boundaries rather than inside grains, which would result in stress concentrations at grain boundaries and localized strains, leading to the poor ductility of graphene/Al composites. In this work, intragranular nano-sized graphene nanoplates with high-content were dispersed in the matrix uniformly by a modified ball milling strategy, which induces that the strength and uniform elongation of the composites were simultaneously enhanced due to the improved work hardenability. Furthermore, the strengthening and toughening mechanisms were also discussed. This work offers a new insight into the fabrication and design of graphene/Al composites with both high strength and ductility.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Currently, seldom studies have paid close attention to the impact of the defects and oxygen-containing functional groups on the surface of the graphene for composite applications. In this work, two ...typical graphene materials, namely graphene nanosheets synthesized by an in situ catalytic reaction and reduced graphene oxide (RGO), were adopted to fabricate reinforced copper matrix composites by spark plasma sintering. A harmful transitional interfacial layer made up of Cu/CuOx/amorphous carbon/RGO, resulted from interfacial reaction between Cu and RGO, were observed in the RGO/Cu composite. In contrast, the in situ synthesized graphene with fewer defect and lower oxygen level can realize clean graphene–Cu interface with Cu–O–C bonding and thus lead to much improved interface bonding and superior yield strength and tensile ductility. These results imply that the in situ synthesized graphene is more favorable for achievement of robust interfacial bonding for enhancing the mechanical properties of the graphene-Cu composites.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
A general ultrathin‐nanosheet‐induced strategy for producing a 3D mesoporous network of Co3O4 is reported. The fabrication process introduces a 3D N‐doped carbon network to adsorb metal cobalt ions ...via dipping process. Then, this carbon matrix serves as the sacrificed template, whose N‐doping effect and ultrathin nanosheet features play critical roles for controlling the formation of Co3O4 networks. The obtained material exhibits a 3D interconnected architecture with large specific surface area and abundant mesopores, which is constructed by nanoparticles. Merited by the optimized structure in three length scales of nanoparticles–mesopores–networks, this Co3O4 nanostructure possesses superior performance as a LIB anode: high capacity (1033 mAh g−1 at 0.1 A g−1) and long‐life stability (700 cycles at 5 A g−1). Moreover, this strategy is verified to be effective for producing other transition metal oxides, including Fe2O3, ZnO, Mn3O4, NiCo2O4, and CoFe2O4.
A general ultrathin‐nanosheet‐induced strategy is introduced for producing 3D mesoporous network of transition metal oxides (TMOs). An N‐doped carbon network serves as the sacrificed template, which can be applied to many kinds of TMOs. The obtained material exhibits an interconnected mesopore architecture and possesses superior performance as a lithium ion anode.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
A facile and scalable 2D spatial confinement strategy is developed for in situ synthesizing highly crystalline MoS2 nanosheets with few layers (≤5 layers) anchored on 3D porous carbon nanosheet ...networks (3D FL-MoS2@PCNNs) as lithium-ion battery anode. During the synthesis, 3D self-assembly of cubic NaCl particles is adopted to not only serve as a template to direct the growth of 3D porous carbon nanosheet networks, but also create a 2D-confined space to achieve the construction of few-layer MoS2 nanosheets robustly lain on the surface of carbon nanosheet walls. In the resulting 3D architecture, the intimate contact between the surfaces of MoS2 and carbon nanosheets can effectively avoid the aggregation and restacking of MoS2 as well as remarkably enhance the structural integrity of the electrode, while the conductive matrix of 3D porous carbon nanosheet networks can ensure fast transport of both electrons and ions in the whole electrode. As a result, this unique 3D architecture manifests an outstanding long-life cycling capability at high rates, namely, a specific capacity as large as 709 mAh g–1 is delivered at 2 A g–1 and maintains ∼95.2% even after 520 deep charge/discharge cycles. Apart from promising lithium-ion battery anode, this 3D FL-MoS2@PCNN composite also has immense potential for applications in other areas such as supercapacitor, catalysis, and sensors.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Engineering of 3D graphene/metal composites with ultrasmall sized metal and robust metal–graphene interfacial interaction for energy storage application is still a challenge and rarely reported. In ...this work, a facile top‐down strategy is developed for the preparation of SnSb‐in‐plane nanoconfined 3D N‐doped porous graphene networks for sodium ion battery anodes, which are composed of several tens of interconnected empty N‐graphene boxes in‐plane firmly embedded with ultrasmall SnSb nanocrystals. The all‐around encapsulation (plane‐to‐plane contact) architecture that provides a large interface between N‐graphene and SnSb nanocrystal not only effectively enhances the electron conductivity and structural integrity of the overall electrode, but also offers excess interfacial sodium storage, thus leading to much enhanced high‐rate sodium storage capacity and stability, which has been proven by both experimental results and first‐principles simulations. Moreover, this top‐down strategy can enable new paths to the low‐cost and high‐yield synthesis of 3D graphene/metal composites for applications in energy‐related fields and beyond.
The all‐around encapsulation (plane‐to‐plane contact) architecture that provides a large interface between N‐graphene and SnSb nanocrystal not only effectively enhances the electron conductivity and structural integrity of the overall electrode, but also offers excess interfacial sodium storage, thus leading to much enhanced high‐rate sodium storage capacity and stability, which is proven by both experimental results and first‐principles simulations.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Display omitted
•Mo2C submicron layer was coated on diamond particles by a molten salts route.•Mo powder was used as the Mo source for preparing Mo2C coating.•Mo2C coating plays diverse roles on ...diamond/Cu or diamond/Al composites.•Mo2C coating increases the thermal conductivity of diamond/Cu composites.
Mo2C submicron layer coated diamond particles prepared by a molten salts route with Mo powder as the starting material were used as the filler in Cu- and Al- matrix composites. The microstructure and thermal property of the composites prepared by a vacuum pressure infiltration method were investigated. When introducing a 500nm thick Mo2C layer, the thermal conductivity of the composites with different matrix presented different performance. A high thermal conductivity (657Wm−1K−1) was obtained in diamond/Cu composites owing to the improved interfacial bonding and lower interfacial thermal resistance, while the thermal conductivity of diamond/Al composites decreased from 553Wm−1K−1 to 218Wm−1K−1 when introducing the Mo2C layer, which can be attributed to the formation of harmful granule-phase (Al12Mo) at the interface of diamond and aluminum. This work provides a promising approach to improve performance of diamond reinforced metal matrix composites by selecting carbide as an interface modifier.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Plants belonging to family Paeoniaceae are not only economically important ornamental plants but also medicinal plants used as an important source of traditional Chinese medicine. Owing to the ...complex network evolution and polyploidy evolution of this family, its systematics and taxonomy are controversial and require a detailed investigation. In this study, three complete chloroplast genomes of sect. Paeonia, one of the sections of Paeonia, were sequenced and then analysed together with 16 other published chloroplast genomes of Paeoniaceae species. The total lengths of the chloroplast genomes of these species were 152,153-154,405 bp. A total of 82-87 protein-coding genes, 31-40 tRNA genes and 8 rRNA genes were annotated. Bioinformatics analysis revealed 61-74 simple sequence repeats (SSRs) in the chloroplast genomes, most of which have A/T base preference. Codon usage analysis showed that A/U-ending codons were more positive than C/G-ending codons, and a slight bias in codon usage was observed in these species. A comparative analysis of these 19 species of Paeoniaceae was then conducted. Fourteen highly variable regions were selected for species relationship study. Phylogenetic analysis revealed that the species of sect. Paeonia gathered in one branch and then divided into different small branches. P. lactiflora, P. anomala, P. anomala subsp. veitchii and P. mairei clustered together. P. intermedia was related to P. obovata and P. obovata subsp. willmottiae. P. emodi was the sister to all other species in the sect. Paeonia.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
PDF
