Lithium–sulfur (Li–S) batteries with high energy density and long cycle life are considered to be one of the most promising next‐generation energy‐storage systems beyond routine lithium‐ion ...batteries. Various approaches have been proposed to break down technical barriers in Li–S battery systems. The use of nanostructured metal oxides and sulfides for high sulfur utilization and long life span of Li–S batteries is reviewed here. The relationships between the intrinsic properties of metal oxide/sulfide hosts and electrochemical performances of Li–S batteries are discussed. Nanostructured metal oxides/sulfides hosts used in solid sulfur cathodes, separators/interlayers, lithium‐metal‐anode protection, and lithium polysulfides batteries are discussed respectively. Prospects for the future developments of Li–S batteries with nanostructured metal oxides/sulfides are also discussed.
Nanostructured metal oxides and sulfides are considered as polysulfide anchoring sites in working Li–S batteries for the battery's high sulfur utilization and long life span. The relationships between the intrinsic properties of the metal oxide/sulfide hosts and the electrochemical performances of Li–S batteries are reviewed.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Owing to high specific energy, low cost, and environmental friendliness, lithium–sulfur (Li–S) batteries hold great promise to meet the increasing demand for advanced energy storage beyond portable ...electronics, and to mitigate environmental problems. However, the application of Li–S batteries is challenged by several obstacles, including their short life and low sulfur utilization, which become more serious when sulfur loading is increased to the practically accepted level above 3–5 mg cm−2. More and more efforts have been made recently to overcome the barriers toward commercially viable Li–S batteries with a high sulfur loading. This review highlights the recent progress in high‐sulfur‐loading Li–S batteries enabled by hierarchical design principles at multiscale. Particularly, basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are under specific concerns. Hierarchy in the multiscale design is proposed to guide the future development of high‐sulfur‐loading Li–S batteries.
High‐sulfur‐loading lithium–sulfur (Li–S) batteries enabled by multiscale hierarchical design principles are reviewed. The basic insights into the interfacial reactions, strategies for mesoscale assembly, unique architectures, and configurational innovation in the cathode, anode, and separator are of specific concern. Hierarchy in the multiscale design is proposed to guide the future development of high‐sulfur‐loading Li–S batteries.
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Dilute alloying is an effective strategy to tune properties of solid catalysts but is rarely leveraged in complex reactions beyond small molecule conversion. In this work, dilute dopants are ...demonstrated to serve as activating centers to construct multiatom catalytic domains in metal nitride electrocatalysts for lithium–sulfur (Li–S) batteries, of which the sulfur cathode suffers from sluggish and complex conversion reactions. With titanium nitride (TiN) as a model system, the dilute cobalt alloying is shown to greatly improve the reaction kinetics while inducing negligible catalyst reconstruction. Compared to the pristine TiN, the dilute nitride alloy catalyst enables onefold increase in the high rate (2.0 C) capacities of Li–S batteries, as well as an impressively low cyclic decay rate of 0.17% at a sulfur loading of 4.0 mgS cm−2. This work opens up new opportunities toward the rational design of Li–S electrocatalysts by dilute alloying and also enlightens the understandings of complex domain‐catalyzed reactions in energy applications.
Dilute alloying implants “activating” centers in nitride alloy electrocatalysts to boost lithium–sulfur (Li–S) batteries. Dilute Co dopants activate the surrounding N and Ti atoms to construct multiatom active domains for efficient bidirectional catalysis of S redox reactions. The corresponding dilute nitride alloy improves the reaction kinetics and electrochemical performance of Li–S batteries.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Lithium–sulfur (Li–S) batteries deliver a high theoretical energy density of 2600 Wh kg−1, and hold great promise to serve as a next‐generation high‐energy‐density battery system. Great progress has ...been achieved in cathode design to deal with the intrinsic problems of sulfur cathodes, including low conductivity, the dissolution of polysulfide intermediate, and volume fluctuation. However, aiming at the practical applications of Li–S batteries, the weight percentage of sulfur in cathode materials and the overall areal sulfur loading need to be significantly increased, which inevitably complicate the process and cause heavy shuttle effect, slow redox kinetics, and more undesirable reaction pathways. Recently, rationally designing efficient mediators, as well as incorporating them into a working battery, emerges to be a promising method to construct high‐energy‐density Li–S batteries. The influence of mediators on Li–S batteries appears to be the enhancement in redox kinetics and the increase in reaction efficiency. In this feature article, the mechanistic understanding of redox kinetics in Li–S reactions is discussed, and then a comprehensive analysis of the recent advances in both heterogeneous and homogeneous mediator design is provided. A mediator perspective in building high‐energy‐density Li–S batteries is also included.
Mediators in lithium–sulfur batteries can enhance the redox kinetics and increase the reaction efficiency, which benefit the practical applications requiring a high sulfur content and a high areal loading amount. This feature article discusses the mechanism of redox kinetics, and reviews the recent advances in heterogeneous/homogeneous mediator design in lithium–sulfur batteries.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
The performance of Li‐ion batteries (LIBs) is highly dependent on their interfacial chemistry, which is regulated by electrolytes. Conventional electrolyte typically contains polar solvents to ...dissociate Li salts. Herein we report a weakly solvating electrolyte (WSE) that consists of a pure non‐polar solvent, which leads to a peculiar solvation structure where ion pairs and aggregates prevail under a low salt concentration of 1.0 M. Importantly, WSE forms unique anion‐derived interphases on graphite electrodes that exhibit fast‐charging and long‐term cycling characteristics. First‐principles calculations unravel a general principle that the competitive coordination between anions and solvents to Li ions is the origin of different interfacial chemistries. By bridging the gap between solution thermodynamics and interfacial chemistry in batteries, this work opens a brand‐new way towards precise electrolyte engineering for energy storage devices with desired properties.
A weakly solvating electrolyte affords a new path towards anion‐derived interfacial chemistry in lithium‐ion batteries. By formulating electrolyte with a non‐polar solvent, ion pairs and aggregates prevail under normal concentrations and give rise to anion‐derived interphases on graphite electrodes with superior electrochemical performances.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
The development of energy‐storage devices has received increasing attention as a transformative technology to realize a low‐carbon economy and sustainable energy supply. Lithium–sulfur (Li–S) ...batteries are considered to be one of the most promising next‐generation energy‐storage devices due to their ultrahigh energy density. Despite the extraordinary progress in the last few years, the actual energy density of Li–S batteries is still far from satisfactory to meet the demand for practical applications. Considering the sulfur electrochemistry is highly dependent on solid‐liquid‐solid multi‐phase conversion, the electrolyte amount plays a primary role in the practical performances of Li–S cells. Therefore, a lean electrolyte volume with low electrolyte/sulfur ratio is essential for practical Li–S batteries, yet under these conditions it is highly challenging to achieve acceptable electrochemical performances regarding sulfur kinetics, discharge capacity, Coulombic efficiency, and cycling stability especially for high‐sulfur‐loading cathodes. In this Review, the impact of the electrolyte/sulfur ratio on the actual energy density and the economic cost of Li–S batteries is addressed. Challenges and recent progress are presented in terms of the sulfur electrochemical processes: the dissolution–precipitation conversion and the solid–solid multi‐phasic transition. Finally, prospects of future lean‐electrolyte Li–S battery design and engineering are discussed.
Lean on me: The challenges, recent progress, and perspectives for lean‐electrolyte Li–S batteries are discussed in terms of the two electrochemical processes for sulfur, that is, the dissolution–precipitation conversion and the solid–solid pathway.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Solid‐state lithium (Li) metal batteries (SSLMBs) have become a research hotspot in the energy storage field due to the much‐enhanced safety and high energy density. However, the SSLMBs suffer from ...failures including dendrite‐induced short circuits and contact‐loss‐induced high impedance, which are highly related to the Li plating/stripping kinetics and hinder the practical application of SSLMBs. The maximum endurable current density of lithium battery cycling without cell failure in SSLMB is generally defined as critical current density (CCD). Therefore, CCD is an important parameter for the application of SSLMBs, which can help to determine the rate‐determining steps of Li kinetics in solid‐state batteries. Herein, the theoretical and practical meanings for CCD from the fundamental thermodynamic and kinetic principles, failure mechanisms, CCD identifications, and influence factors for improving CCD performances are systematically reviewed. Based on these fundamental understandings, a series of strategies and outlooks for future researches on SSLMB are presented, endeavoring on increasing CCD for practical SSLMBs.
The critical current density (CCD) is an important standard for future solid‐state Li metal batteries (SSLMBs), which is highly related to power density and fast charge capability. The CCD can help to unravel the rate determining factors of Li kinetics including special mass transport and charge transfer at solid–solid interfaces.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
A nanostructured lithium‐metal anode employing an unstacked graphene “drum” and dual‐salt electrolyte brings about a dendrite‐free lithium depositing morphology. On the one hand, the unstacked ...graphene framework with ultrahigh specific surface area guarantees an ultralow local current density that prevents the growth of lithium dendrites. On the other hand, the stable, flexible, and compact solid electrolyte interphase layer induced by the dual‐salt electrolyte protects the deposited lithium layers.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Safe and rechargeable lithium metal batteries have been difficult to achieve because of the formation of lithium dendrites. Herein an emerging electrolyte based on a simple solvation strategy is ...proposed for highly stable lithium metal anodes in both coin and pouch cells. Fluoroethylene carbonate (FEC) and lithium nitrate (LiNO3) were concurrently introduced into an electrolyte, thus altering the solvation sheath of lithium ions, and forming a uniform solid electrolyte interphase (SEI), with an abundance of LiF and LiNxOy on a working lithium metal anode with dendrite‐free lithium deposition. Ultrahigh Coulombic efficiency (99.96 %) and long lifespans (1000 cycles) were achieved when the FEC/LiNO3 electrolyte was applied in working batteries. The solvation chemistry of electrolyte was further explored by molecular dynamics simulations and first‐principles calculations. This work provides insight into understanding the critical role of the solvation of lithium ions in forming the SEI and delivering an effective route to optimize electrolytes for safe lithium metal batteries.
Not dead ′Li′: Fluoroethylene carbonate (FEC) and lithium nitrate (LiNO3) were concurrently introduced into an electrolyte, thus altering the solvation sheath of lithium ions and forming a uniform solid electrolyte interphase (SEI). An abundance of LiF and LiNxOy is formed on the working lithium metal anode and contributes to dendrite‐free lithium deposition.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Lithium‐ion batteries with routine carbonate electrolytes cannot exhibit satisfactory fast‐charging performance and lithium plating is widely observed at low temperatures. Herein we demonstrate that ...a localized high‐concentration electrolyte consisting of 1.5 M lithium bis(fluorosulfonyl)imide in dimethoxyethane with bis(2,2,2‐trifluoroethyl) ether as the diluent, enables fast‐charging of working batteries. A uniform and robust solid electrolyte interphase (SEI) can be achieved on graphite surface through the preferential decomposition of anions. The established SEI can significantly inhibit ether solvent co‐intercalation into graphite and achieve highly reversible Li+ intercalation/de‐intercalation. The graphite | Li cells exhibit fast‐charging potential (340 mAh g−1 at 0.2 C and 220 mAh g−1 at 4 C), excellent cycling stability (ca. 85.5 % initial capacity retention for 200 cycles at 4 C), and impressive low‐temperature performance.
The unique solvation structure in a localized high‐concentration electrolyte can suppress co‐intercalation of ether solvent into the graphite interlayers and render fast‐charging of practical lithium‐ion batteries.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK