The 2014-15 Holuhraun eruption in Iceland was the largest fissure eruption in over 200 years, emitting prodigious amounts of gas and particulate matter into the troposphere. Reykjavík, the capital ...area of Iceland (250 km from eruption site) was exposed to air pollution events from advection of (i) a relatively young and chemically primitive volcanic plume with a high sulphur dioxide gas (SO
) to sulphate PM (SO
) ratio, and (ii) an older and chemically mature volcanic plume with a low SO
/SO
ratio. Whereas the advection and air pollution caused by the primitive plume were successfully forecast and forewarned in public advisories, the mature plume was not. Here, we show that exposure to the mature plume is associated with an increase in register-measured health care utilisation for respiratory disease by 23% (95% CI 19.7-27.4%) and for asthma medication dispensing by 19.3% (95% CI 9.6-29.1%). Absence of public advisories is associated with increases in visits to primary care medical doctors and to the hospital emergency department. We recommend that operational response to volcanic air pollution considers both primitive and mature types of plumes.
Two remarkable 2021 eruptions – Fagradalsfjall (Reykjanes, Iceland) and Cumbre Vieja (La Palma, Spain) – have been captured in imagery and videography at unprecedented spatial and temporal resolution ...by tourists, volcano-enthusiasts, and media organizations. We propose this represents the start of a new era for observational volcanology, with the abundance of eruption imagery leveraged for scientific use.This study explores the scientific potential of crowdsourced observations during volcanic eruptions, using the 2021 Fagradalsfjall (Iceland) and Cumbre Vieja (Canary Islands) events as case studies.
Volcanic air pollution from both explosive and effusive activity can affect large populations as far as thousands of kilometers away from the source, for days to decades or even centuries. Here, we ...summarize key advances and prospects in the assessment of health hazards, effects, risk, and management. Recent advances include standardized ash assessment methods to characterize the multiple physicochemical characteristics that might influence toxicity; the rise of community-based air quality monitoring networks using low-cost gas and particulate sensors; the development of forecasting methods for ground-level concentrations and associated public advisories; the development of risk and impact assessment methods to explore health consequences of future eruptions; and the development of evidence-based, locally specific measures for health protection. However, it remains problematic that the health effects of many major and sometimes long-duration eruptions near large populations have gone completely unmonitored. Similarly, effects of prolonged degassing on exposed populations have received very little attention relative to explosive eruptions. Furthermore, very few studies have longitudinally followed populations chronically exposed to volcanic emissions; thus, knowledge gaps remain about whether chronic exposures can trigger development of potentially fatal diseases. Instigating such studies will be facilitated by continued co-development of standardized protocols, supporting local study teams and procuring equipment, funding, and ethical permissions. Relationship building between visiting researchers and host country academic, observatory, and agency partners is vital and can, in turn, support the effective communication of health impacts of volcanic air pollution to populations, health practitioners, and emergency managers.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
The 2018 lower East Rift Zone (LERZ) eruption and the accompanying collapse of the summit caldera marked the most destructive episode of activity at Kı̄lauea Volcano in the last 200 years. The ...eruption was extremely well‐monitored, with extensive real‐time lava sampling as well as continuous geodetic data capturing the caldera collapse. This multiparameter data set provides an exceptional opportunity to determine the reservoir geometry and magma transport paths supplying Kı̄lauea’s LERZ. The forsterite contents of olivine crystals, together with the degree of major element disequilibrium with carrier melts, indicates that two distinct crystal populations were erupted from Fissure 8 (termed high‐ and low‐Fo). Melt inclusion entrapment pressures reveal that low‐Fo olivines (close to equilibrium with their carrier melts) crystallized within the Halema’uma’u reservoir (∼2‐km depth), while many high‐Fo olivines (>Fo81.5; far from equilibrium with their carrier melts) crystallized within the South Caldera reservoir (∼3–5‐km depth). Melt inclusions in high‐Fo olivines experienced extensive post‐entrapment crystallization following their incorporation into cooler, more evolved melts. This favored the growth of a CO2‐rich vapor bubble, containing up to 99% of the total melt inclusion CO2 budget (median = 93%). If this CO2‐rich bubble is not accounted for, entrapment depths are significantly underestimated. Conversely, reconstructions using equation of state methods rather than direct measurements of vapor bubbles overestimate entrapment depths. Overall, we show that direct measurements of melts and vapor bubbles by secondary‐ion mass spectrometry and Raman spectroscopy, combined with a suitable H2O‐CO2 solubility model, is a powerful tool to identify the magma storage reservoirs supplying volcanic eruptions.
Plain Language Summary
Pockets of frozen magma trapped within olivine crystals, termed “melt inclusions,” can provide information about the depths at which magma is stored beneath the surface prior to a volcanic eruption. This is because the amount of CO2 and H2O that can be dissolved in a melt is dependent on the pressure, and therefore the depth. We examine melt inclusions from lava flows produced during the 2018 eruption of Kı̄lauea Volcano. Previous work, based on geophysics, has shown that magma is stored in two main reservoirs at Kı̄lauea, located at ∼1–2‐ and ∼3–5‐km depth. However, because many melt inclusions host almost all of their CO2 within a vapor bubble, which is rarely measured, previous petrological estimates of magma storage depths at Kı̄lauea do not align with the depths of the two reservoirs identified by geophysics. In this study, we measure the amount of CO2 in the glass and the bubble using secondary‐ion mass spectrometry and Raman spectroscopy, respectively. By adding these two measurements together, we can reconstruct the amount of CO2 that was present when melt inclusions were trapped. Calculated depths align remarkably well with geophysical estimates, and demonstrate that the 2018 eruption was supplied by both magma storage reservoirs.
Key Points
Petrological, gaseous and geophysical observations can be reconciled by a model where Fissure 8 was supplied from two summit storage reservoirs (∼1–2‐ and 3–5‐km depth)
Extensive post‐entrapment crystallization of melt inclusions within high‐Fo olivines (Fo > 81.5) caused ∼90% of the CO2 to enter the vapor bubble
Raman analyses of vapor bubbles combined with choice of a suitable H2O‐CO2 solubility model is required to accurately determine magma storage depths
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
The 2014–2015 Bárðarbunga‐Veiðivötn fissure eruption at Holuhraun produced about 1.5 km3 of lava, making it the largest eruption in Iceland in more than 200 years. Over the course of the eruption, ...daily volcanic sulfur dioxide (SO2) emissions exceeded daily SO2 emissions from all anthropogenic sources in Europe in 2010 by at least a factor of 3. We present surface air quality observations from across Northern Europe together with satellite remote sensing data and model simulations of volcanic SO2 for September 2014. We show that volcanic SO2 was transported in the lowermost troposphere over long distances and detected by air quality monitoring stations up to 2750 km away from the source. Using retrievals from the Ozone Monitoring Instrument (OMI) and the Infrared Atmospheric Sounding Interferometer (IASI), we calculate an average daily SO2 mass burden of 99 ± 49 kilotons (kt) of SO2 from OMI and 61 ± 18 kt of SO2 from IASI for September 2014. This volcanic burden is at least a factor of 2 greater than the average SO2 mass burden between 2007 and 2009 due to anthropogenic emissions from the whole of Europe. Combining the observational data with model simulations using the United Kingdom Met Office's Numerical Atmospheric‐dispersion Modelling Environment model, we are able to constrain SO2 emission rates to up to 120 kilotons per day (kt/d) during early September 2014, followed by a decrease to 20–60 kt/d between 6 and 22 September 2014, followed by a renewed increase to 60–120 kt/d until the end of September 2014. Based on these fluxes, we estimate that the eruption emitted a total of 2.0 ± 0.6 Tg of SO2 during September 2014, in good agreement with ground‐based remote sensing and petrological estimates. Although satellite‐derived and model‐simulated vertical column densities of SO2 agree well, the model simulations are biased low by up to a factor of 8 when compared to surface observations of volcanic SO2 on 6–7 September 2014 in Ireland. These biases are mainly due to relatively small horizontal and vertical positional errors in the simulations of the volcanic plume occurring over transport distances of thousands of kilometers. Although the volcanic air pollution episodes were transient and lava‐dominated volcanic eruptions are sporadic events, the observations suggest that (i) during an eruption, volcanic SO2 measurements should be assimilated for near real‐time air quality forecasting and (ii) existing air quality monitoring networks should be retained or extended to monitor SO2 and other volcanic pollutants.
Key Points
The 2014–2015 Icelandic fissure eruption at Bárðarbunga affected air quality in far field
Satellite‐derived average daily SO2 burden of 99 ± 49 kt (OMI) and 61 ± 18 kt (IASI) in September 2014
We calculate a total release of 2.0 ± 0.6 Tg of SO2 for September 2014 and fluxes up to 120 kt/d
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Background
Aerosol is a health risk to theatre staff. This laboratory study quantifies the reduction in particulate matter aerosol concentrations produced by electrocautery and drilling when using ...mitigation strategies such as irrigation, respirator filtration and suction in a lab environment to prepare for future work under live OR conditions.
Methods
We combined one aerosol-generating procedure (monopolar cutting or coagulating diathermy or high-speed diamond- or steel-tipped drilling of cadaveric porcine tissue) with one or multiple mitigation strategies (instrument irrigation, plume suction and filtration using an FFP3 respirator filter) and using an optical particle counter to measure particulate matter aerosol size and concentrations.
Results
Significant aerosol concentrations were observed during all aerosol-generating procedures with concentrations exceeding 3 × 10
6
particles per 100 ml. Considerable reductions in concentrations were observed with mitigation. In drilling, suction, FFP3 filtration and wash alone respectively reduced aerosol by 19.3–31.6%, 65.1–70.8% and 97.2 to > 99.9%. The greatest reduction (97.38 to > 99.9%) was observed when combining irrigation and filtration. Coagulating diathermy reduced concentrations by 88.0–96.6% relative to cutting, but produced larger particles. Suction alone, and suction with filtration reduced aerosol concentration by 41.0–49.6% and 88.9–97.4% respectively. No tested mitigation strategies returned aerosol concentrations to baseline.
Conclusion
Aerosol concentrations are significantly reduced through the combined use of filtration, suction and irrigation. Further research is required to characterise aerosol concentrations in the live OR and to find acceptable exposure limits, and in their absence, to find methods to further reduce exposure to theatre staff.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Abstract
Volcanoes represent one of the largest natural sources of metals to the Earth’s surface. Emissions of these metals can have important impacts on the biosphere as pollutants or nutrients. ...Here we use ground- and drone-based direct measurements to compare the gas and particulate chemistry of the magmatic and lava–seawater interaction (laze) plumes from the 2018 eruption of Kīlauea, Hawai’i. We find that the magmatic plume contains abundant volatile metals and metalloids whereas the laze plume is further enriched in copper and seawater components, like chlorine, with volatile metals also elevated above seawater concentrations. Speciation modelling of magmatic gas mixtures highlights the importance of the S
2−
ligand in highly volatile metal/metalloid degassing at the magmatic vent. In contrast, volatile metal enrichments in the laze plume can be explained by affinity for chloride complexation during late-stage degassing of distal lavas, which is potentially facilitated by the HCl gas formed as seawater boils.
Abstract Mafic magmas may experience multiple stages of sulfide saturation and resorption during ascent and differentiation. Quenched tephra erupted during the 2014–15 Holuhraun eruption preserve ...abundant evidence for sulfide resorption, offering a rare opportunity to explore the sulfide life cycle from nucleation to resorption. Specifically, we combine detailed textural and chemical analyses of sulfides and silicate melts with geochemical models of sulfide saturation and degassing. This integrative approach demonstrates that sulfides began nucleating in melts with ~8 wt% MgO, persisted during fractionation to 6.5 wt% MgO, before resorbing heterogeneously in response to sulfur degassing. Sulfides are preserved preferentially in confined geometries within and between crystals, suggesting that kinetic effects impeded sulfur loss from the melt and maintained local sulfide saturation on eruption. The proportion of sulfides exhibiting breakdown textures increases throughout the eruption, coincident with decreasing magma discharge, indicating that sulfide resorption and degassing are kinetically limited. Sulfides likely modulate the emission of sulfur and chalcophile elements to the atmosphere and surface environment, with implications for assessing the environmental impacts and societal hazards of basaltic fissure eruptions.
Abstract
Long-lived basaltic volcanic eruptions are a globally important source of environmentally reactive, volatile metal pollutant elements such as selenium, cadmium and lead. The 2018 eruption of ...Kīlauea, Hawai’i produced exceptionally high discharge of metal pollutants, and was an unprecedented opportunity to track them from vent to deposition. Here we show, through geochemical sampling of the plume that volatile metal pollutants were depleted in the plume up to 100 times faster than refractory species, such as magnesium and iron. We propose that this rapid wet deposition of complexes containing reactive and potentially toxic volatile metal pollutants may disproportionately impact localised areas close to the vent. We infer that the relationship between volatility and solubility is an important control on the atmospheric behaviour of elements. We suggest that assessment of hazards from volcanic emissions should account for heterogeneous plume depletion of metal pollutants.
Among the hazards posed by volcanoes are the emissions of gases and particles that can affect air quality and damage agriculture and infrastructure. A recent intense episode of volcanic degassing ...associated with severe impacts on air quality accompanied the 2018 lower East Rift Zone (LERZ) eruption of Kīlauea volcano, Hawai'i. This resulted in a major increase in gas emission rates with respect to usual emission values for this volcano, along with a shift in the source of the dominant plume to a populated area on the lower flank of the volcano. This led to reduced air quality in downwind communities. We analyse open-access data from the permanent air quality monitoring networks operated by the Hawai'i Department of Health (HDOH) and National Park Service (NPS), and report on measurements of atmospheric sulfur dioxide (SO 2) between 2007 and 2018 and PM 2.5 (aerosol particulate matter with diameter <2.5 µm) between 2010 and 2018. Additional air quality data were collected through a community-operated network of low-cost PM 2.5 sensors during the 2018 LERZ eruption. From 2007 to 2018 the two most significant escalations in Kīlauea's volcanic emissions were: the summit eruption that began in 2008 (Kīlauea emissions averaged 5-6 kt/day SO 2 from 2008 until summit activity decreased in May 2018) and the LERZ eruption in 2018 when SO 2 emission rates reached a monthly average of 200 kt/day during June. In this paper we focus on characterizing the airborne pollutants arising from the 2018 LERZ eruption and the spatial distribution and severity of volcanic air pollution events across the Island of Hawai'i. The LERZ eruption caused the most frequent and severe exceedances of the Environmental Protection Agency (EPA) PM 2.5 air quality threshold (35 µg/m 3 as a daily average) in Hawai'i in the period 2010-2018. In Kona, for example, the maximum 24-h-mean mass concentration of PM 2.5 was recorded as 59 µg/m 3 on the twenty-ninth of May 2018, which was one of eight recorded exceedances of the EPA air quality threshold during the 2018 LERZ eruption, where there had been no exceedances in the previous 8 years as measured by the Whitty et al. Kīlauea-PM 2.5 and SO 2 Concentrations HDOH and NPS networks. SO 2 air pollution during the LERZ eruption was most severe in communities in the south and west of the island, as measured by selected HDOH and NPS stations in this study, with a maximum 24-h-mean mass concentration of 728 µg/m 3 recorded in Ocean View (100 km west of the LERZ emission source) in May 2018. Data from the low-cost sensor network correlated well with data from the HDOH PM 2.5 instruments, confirming that these low-cost sensors provide a robust means to augment reference-grade instrument networks.
PDF
