► Effective P segregation was proposed by segregated P and intergranular fracture. ► The DBTT of aged and irradiated steel was analyzed by effective P segregation. ► The DBTT of two classes of steels ...are controlled by differing mechanisms. ► Hardening strongly influenced the embrittling potency of segregated P.
This article introduced effective P segregation in terms of the product of the amount of segregated P and partial intergranular fracture to account for the combined effects on the ductile–brittle transition temperature (DBTT) measured by dynamic and static notched bar tests on several alloy steels. Effective P segregation characterized a DBTT shift caused by thermal ageing and/or neutron irradiation in various A533B and 2.25Cr–1Mo steels, while P segregation controlled the DBTT independent of the fraction of intergranular fracture in thermally aged 3.5Ni–1.7Cr steels with and without Mo and V. These DBTT behaviors of the two classes of steels are related to differing brittle fracture mechanisms. The present analysis enables one to investigate how the embrittling potency of segregated P in association with partial intergranular fracture is influenced by the differing plasticity and the addition of several alloying elements under dynamic and static loading conditions.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
► Microstructural changes in stainless steel electroslag weld-overlay cladding. ► Thermal aging caused progress of spinodal decomposition and precipitation of G phases in the δ-ferrite phase. ► The ...degree of the spinodal decomposition had a linear relationship to the hardness.
The effect of thermal aging on microstructural changes was investigated in stainless steel weld-overlay cladding composed of 90% austenite and 10% δ-ferrite phases using atom probe tomography (APT). In as-received materials subjected to cooling process after post-welding heat treatments (PWHT), a slight fluctuation of the Cr concentration was already observed due to spinodal decomposition in the ferrite phase but not in the austenitic phase. Thermal aging at 400
°C for 10,000
h caused not only an increase in the amplitude of spinodal decomposition but also the precipitation of G phases with composition ratios of Ni:Si:Mn
=
16:7:6 in the ferrite phase. The chemical compositions of M
23C
6 type carbides seemed to be formed at the austenite/ferrite interface were analyzed. The analyses of the magnitude of the spinodal decomposition and the hardness implied that the spinodal decomposition was the main cause of the hardening.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The effect of thermal aging on microstructural changes in stainless steel submerged arc weld-overlay cladding of reactor pressure vessels was investigated using atom probe tomography (APT). In ...as-received materials subjected to post-welding heat treatments (PWHTs), with a subsequent furnace cooling, a slight fluctuation of the Cr concentration was observed due to spinodal decomposition in the δ-ferrite phase but not in the austenitic phase. Thermal aging at 400°C for 10,000h caused not only an increase in the amplitude of spinodal decomposition but also the precipitation of G phases with composition ratios of Ni:Si:Mn=16:7:6 in the δ-ferrite phase. The degree of the spinodal decomposition in the submerged arc weld sample was similar to that in the electroslag weld one reported previously. We also observed a carbide on the γ-austenite and δ-ferrite interface. There were no Cr depleted zones around the carbide.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
ABSTRACT We report the results from a search in Super-Kamiokande for neutrino signals coincident with the first detected gravitational-wave events, GW150914 and GW151226, as well as LVT151012, using ...a neutrino energy range from 3.5 MeV to 100 PeV. We searched for coincident neutrino events within a time window of 500 s around the gravitational-wave detection time. Four neutrino candidates are found for GW150914, and no candidates are found for GW151226. The remaining neutrino candidates are consistent with the expected background events. We calculated the 90% confidence level upper limits on the combined neutrino fluence for both gravitational-wave events, which depends on event energy and topologies. Considering the upward-going muon data set (1.6 GeV-100 PeV), the neutrino fluence limit for each gravitational-wave event is 14-37 (19-50) cm−2 for muon neutrinos (muon antineutrinos), depending on the zenith angle of the event. In the other data sets, the combined fluence limits for both gravitational-wave events range from 2.4 × 104 to 7.0 × 109 cm−2.
The correlation of microstructure evolution and hardening was studied in two kinds of A533B-1 steel with high and low levels of Cu irradiated in a range of dose from 0.32 to 9.9
×
10
19
n
cm
−2 (
E
>
...1
MeV) under a high flux of about 1.7
×
10
13
n
cm
−2
s
−1 using three-dimensional local electrode atom probe (3DAP), positron annihilation (PA) techniques, and Vickers microhardness. The early rapid hardening was found to be caused by mainly matrix defects such as mono- or di-vacancies (
V
1
−
V
2) and/or dislocations indicated by the PA analysis. The 3DAP analysis showed that dense dispersion of dilute Cu rich clusters and lean distribution of Mn–Ni–Si rich clusters, which
were
identified to possess the same dislocation-pinning effect
by applying a Russell and Brown model,
were responsible for large and small hardening in high- and low-Cu steels irradiated above 0.59
×
10
19
n
cm
2, respectively.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
A first study of neutron tagging is conducted in Super-Kamiokande, a 50,000 ton water Cherenkov detector. The tagging efficiencies of thermal neutrons are evaluated in a 0.2%
GdCl
3
-water solution ...and pure water. They are determined to be, respectively, 66.7% for events above 3
MeV and 20% with corresponding background probabilities of
2
×
10
-
4
and
3
×
10
-
2
. This newly developed technique may enable water Cherenkov detectors to identify
ν
¯
e
’s from astrophysical sources as well as those produced by commercial reactors via the delayed coincidence scheme.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Morphology of kaolinite crystals with high-crystallinity (Keokuk, Iowa) has been investigated by electron back-scattered diffraction (EBSD) and high-resolution scanning electron microscopy (SEM). ...EBSD patterns from the specimen generally correspond to those expected from ordered kaolinite. Elongated hexagonal crystals always show the a-axis parallel to the elongated direction. The side-facets of these crystals are in parallel to the c-axis, which is inclined by about 15° from the normal to the basal plane. The Miller indices of the side-facets are exactly ±(110), ±(11̄0), and ±(010). A facet indexed as ±(1Formula: see text0) is developed in some crystals. These morphological characteristics must be reflected in the ordered stacking sequences (the position of the octahedral vacancy site and the direction of the interlayer shift) of the Keokuk kaolinite. Inversely, the crystallinity of individual kaolinite grains may be evaluated from their morphology in a SEM. The feasibility to discriminate the enantiomers in kaolinite using EBSD is also described.
Large coseismic slip was thought to be unlikely to occur on the shallow portions of plate-boundary thrusts, but the 11 March 2011 Tohoku-Oki earthquake moment magnitude (Mw) = 9.0 produced huge ...displacements of ~50 meters near the Japan Trench with a resultant devastating tsunami. To investigate the mechanisms of the very large fault movements, we conducted high-velocity (1.3 meters per second) friction experiments on samples retrieved from the plate-boundary thrust associated with the earthquake. The results show a small stress drop with very low peak and steady-state shear stress. The very low shear stress can be attributed to the abundance of weak clay (smectite) and thermal pressurization effects, which can facilitate fault slip. This behavior provides an explanation for the huge shallow slip that occurred during the earthquake.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK
It is shown that intergranular fracture along prior-austenite grain boundaries in a ultrahigh-strength quenched and tempered 4340-type steel is not suppressed by eliminating all segregated ...embrittling elements. This leaves open the question of how brittle intergranular cracks are nucleated in hydrogen in the absence of such impurities.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The mechanics of great subduction earthquakes are influenced by the frictional properties, structure, and composition of the plate-boundary fault We present observations of the structure and ...composition of the shallow source fault of the 2011 Tohoku-Oki earthquake and tsunami from boreholes drilled by the Integrated Ocean Drilling Program Expedition 343 and 343T. Logging-while-drilling and core-sample observations show a single major plate-boundary fault accommodated the large slip of the Tohoku-Oki earthquake rupture, as well as nearly all the cumulative interplate motion at the drill site. The localization of deformation onto a limited thickness (less than 5 meters) of pelagic clay is the defining characteristic of the shallow earthquake fault suggesting that the pelagic clay may be a regionally important control on tsunamigenic earthquakes.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK