Triboelectric nanogenerators (TENGs) are widely applied to self‐powered devices and force sensors. TENGs consist of the electrode‐layer frequently made of high‐cost conductors (Ag, Au, ITO) and the ...tribo‐layer of rigid negative‐triboelectricity fluoropolymers (PTFE, FEP). The surface morpholoy is studied for enhancing performance. Here, a high‐performance Al/PDMS‐TENG is proposed with a complex morphology of overlapped deep two‐height microneedles (OL‐DTH‐MN) fabricated by the integrated process of low‐cost CO2 laser ablation and PDMS casting for self‐powered devices and high‐sensitivity force/pressure sensors. The high open‐circuit voltage and short‐circuit current of the OL‐DTH‐MN‐TENG are 167 V and 129.3 µA. Also, the sensitivity of the force/pressure sensor of the OL‐DTH‐MN‐TENG is very high, 1.03 V N−1 and about 3.11 V kPa−1, at an area of 30 cm2 that is much higher than the sensitivity of about 0.18–0.414 V N−1 and 0.013–0.29 V kPa−1 of conventional TENG sensors. Meanwhile, the high‐performance OL‐DTH‐MN‐TENG not only exhibits the energy storage capability of charging a 0.1 µF capacitor to 2.75 V at 1.19 s, to maximum 3.22 V, but also activates various self‐powered devices including lighting colorful 226 LEDs connected in series, the “2020‐ME‐NCKU” advertising board, a calculator and a temperature sensor. Numerical simulation is also performed to support the experiments.
Here, a high‐performance Al/PDMS‐TENG with a complex morphology of overlapped deep two‐height microneedles (OL‐DTH‐MN) is proposed. It is fabricated by integrating low‐cost CO2 laser ablation and PDMS casting processes for the self‐powered devices and high‐sensitivity force/pressure sensors. It not only exhibits the energy storage capability but also activates various self‐powered devices and lights colorful 226 LEDs.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Although many techniques exist to transfer data from the widely distributed sensors that make up the Internet of Things (IoT) (e.g., using 3G/4G networks or cables), these methods are associated with ...prohibitively high costs, making them impractical for real-life applications. Recently, several emerging wireless technologies have been proposed to provide long-range communication for IoT sensors. Among these, LoRa has been examined for long-range performance. Although LoRa shows good performance for long-range transmission in the countryside, its radio signals can be attenuated over distance, and buildings, trees, and other radio signal sources may interfere with the signals. Our observations show that in urban areas, LoRa requires dense deployment of LoRa gateways (GWs) to ensure that indoor LoRa devices can successfully transfer data back to remote GWs. Wireless mesh networking is a solution for increasing communication range and packet delivery ratio (PDR) without the need to install additional GWs. This paper presents a LoRa mesh networking system for large-area monitoring of IoT applications. We deployed 19 LoRa mesh networking devices over an <inline-formula> <tex-math notation="LaTeX">800\,\,\text {m} \times 600 </tex-math></inline-formula> m area on our university campus and installed a GW that collected data at 1-min intervals. The proposed LoRa mesh networking system achieved an average 88.49% PDR, whereas the star-network topology used by LoRa achieved only 58.7% under the same settings. To the best of our knowledge, this is the first academic study discussing LoRa mesh networking in detail and evaluating its performance via real experiments.
Display omitted
Electrically conductive thermoplastic polyurethane (TPU) composites with carbon nanofillers have potential applications in strain sensors. However, it is challenging to simultaneously ...achieve low percolation threshold, good electrical conductivity and high strain sensitivity especially in melt-mixed TPU-carbon filler nanocomposites. Here, we report on using branched carbon nanotubes known as carbon nanostructures (CNS) in melt-mixed TPU composites. These composites have an electrical percolation threshold (ΦC) of 0.82 wt%, whereas when using multiwall carbon nanotubes (CNT) the ΦC is 3.02 wt%. Based on linear fitting, the TPU nanocomposite with 2 wt% CNS shows gauge factors of 15, 30 and 58 for strain levels of 0–44%, 45–73% and 74–100%, respectively, by comparison with the 5 wt% CNT nanocomposite, which exhibits a gauge factor of 18 for strain 0–100%. These composites show potential strain-sensing applications in detection of joint bending and muscle exercise. This study reveals the effects of CNT morphology on polymer composite properties, enhancing the understanding of structure-property relationship for polymer nanocomposites.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Multifunctional nanocomposites have the potential to integrate sensing, diagnostic, and therapeutic functions into a single nanostructure. Herein, we synthesize Fe3O4@polydopamine core–shell ...nanocomposites (Fe3O4@PDA NCs) through an in situ self-polymerization method. Dopamine, a melanin-like mimic of mussel adhesive proteins, can self-polymerize to form surface-adherent polydopamine (PDA) films onto a wide range of materials including Fe3O4 nanoparticles used here. In such nanocomposites, PDA provides a number of advantages, such as near-infrared absorption, high fluorescence quenching efficiency, and a surface for further functionalization with biomolecules. We demonstrate the ability of the Fe3O4@PDA NCs to act as theranostic agents for intracellular mRNA detection and multimodal imaging-guided photothermal therapy. This work would stimulate interest in the use of PDA as a useful material to construct multifunctional nanocomposites for biomedical applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Neuroinflammation, especially innate immunocyte-mediated neuroinflammation, has been reported to participate in pathogenesis of Alzheimer's disease (AD). However, the involvement of adaptive immune ...cells, such as CD4(+) T lymphocytes, in pathogenesis of AD is not well clarified. Herein, we focus on T helper 17 (Th17) cells, a subpopulation of CD4(+) T cells with high proinflammation, and show the implication of the cells in neurodegeneration of AD. Amyloid β1-42 (Aβ1-42) was bilaterally injected into hippocampus of rats to induce AD. On days 7 and 14 following the Aβ1-42 administration, escape latency of the rats in Morris water maze was increased, expression of amyloid precursor protein was upregulated, but expression of protein phosphatase 2A was downregulated in the hippocampus, and Nissl stain showed neuronal loss and gliosis in CA1 region. Infusion of FITC-linked albumin in blood circulation and combination with immunostaining of hippocampal sections for RORγ, a specific transcriptional factor of Th17 cells, demonstrated blood-brain barrier (BBB) disruption and Th17 cells' infiltration into brain parenchyma of AD rats. Expression of Th17 proinflammatory cytokines, interleukin (IL)-17 and IL-22, was increased in the hippocampus, and concentrations of the two cytokines were elevated in both the cerebrospinal fluid and the serum in AD occurrence and development. Compared with intact or saline-treated control rats, AD animals indicated an upregulated expression of Fas and FasL in the hippocampus. Further, the immunofluorescent histochemistry on AD hippocampal sections with NeuN, RORγ, Fas and FasL displayed that Fas was principally expressed by neurons and FasL was predominantly expressed by Th17 cells, and that neuronal apoptosis shown by TUNEL and NeuN double-labeled cells increased. These results suggest that Th17 cells, which were infiltrated into AD brain parenchyma, participate in neuroinflammation and neurodegeneration of AD by release of proinflammatory cytokines and by direct action on neurons via Fas/FasL apoptotic pathway.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Neuroinflammation has been reported to be associated with Alzheimer's disease (AD) pathogenesis. Neuroinflammation is generally considered as an outcome of glial activation; however, we recently ...demonstrated that T helper (Th)17 cells, a subpopulation of proinflammatory CD4+ T cells, are also involved in AD pathogenesis. Transforming growth factor (TGF)-β1, a cytokine that can be expressed in the brain, can be immunosuppressive, but its effects on lymphocyte-mediated neuroinflammation in AD pathogenesis have not been well addressed. In the current study we administered TGF-β1 via intracerebroventricle (ICV) and intranasal (IN) routes in AD model rats to investigate its antiinflammatory and neuroprotective effects. The AD rat model was prepared by bilateral hippocampal injection of amyloid-β (Aβ)1-42. TGF-β1 was administered via ICV one hour prior to Aβ1-42 injection or via both nares seven days after Aβ1-42 injection. ICV administration of TGF-β1 before Aβ1-42 injection remarkably ameliorated Aβ1-42-induced neurodegeneration and prevented Aβ1-42-induced increases in glia-derived proinflammatory mediators (TNF-α, IL-1β and iNOS), as well as T cell-derived proinflammatory cytokines (IFN-γ, IL-2, IL-17 and IL-22), in the hypothalamus, serum or cerebrospinal fluid (CSF) in a concentration-dependent manner. TGF-β1 pretreatment also prevented Aβ1-42-induced decreases in the neurotrophic factors, IGF-1, GDNF and BDNF, and in the antiinflammatory cytokine, IL-10. Similarly, IN administration of TGF-β1 after Aβ1-42 injection reduced neurodegeneration, elevation of proinflammatory mediators and cytokines, and reduction of neurotrophic and antiinflammatory factors, in the hypothalamus, serum or CSF. These findings suggest that TGF-β1 suppresses glial and T cell-mediated neuroinflammation and thereby alleviates AD-related neurodegeneration. The effectiveness of IN administered TGF-β1 in reducing Aβ1-42 neurotoxicity suggests a possible therapeutic approach in patients with AD.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Poly(vinylidene fluoride) (PVDF) based nanocomposites with different surface-functionalized multi-walled carbon nanotubes (MWCNTs) were prepared by melt mixing in a small scale compounder. With the ...incorporation of commercial functionalized MWCNTs, the β-phase in PVDF can be directly achieved from melt cooling, as verified by results of Fourier transform infrared spectrum and X-ray diffraction. Interestingly, nanocomposites with amino group functionalized MWCNTs showed the highest percentage of β-phase (17.4%) formation in PVDF, followed by those with hydroxyl groups (11.6%) and unmodified MWCNTs (9.4%). However, the nanocomposites containing MWCNTs with carboxyl groups which were thought to be able to well interact with the dipoles on PVDF chains have the lowest amount of β-phase, i.e. 4.7%. The analysis on the mechanism of the influence of surface functionalization of MWCNTs on the formation of β-phase in PVDF shows that the combined effects of the dispersion of MWCNTs and the nanotube–polymer interactions account for the formation of the β-phase in PVDF.
Display omitted
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
This paper focuses on density-based topology optimization and proposes a combined method to simultaneously impose Minimum length scale in the Solid phase (MinSolid), Minimum length scale in the Void ...phase (MinVoid) and Maximum length scale in the Solid phase (MaxSolid). MinSolid and MinVoid mean that the size of solid parts and cavities must be greater than the size of a prescribed circle or sphere. This is ensured through the robust design approach based on eroded, intermediate and dilated designs. MaxSolid seeks to restrict the formation of solid parts larger than a prescribed size, which is imposed through local volume restrictions. In the first part of this article, we show that by proportionally restricting the maximum size of the eroded, intermediate and dilated designs, it is possible to obtain optimized designs satisfying, simultaneously, MinSolid, MinVoid and MaxSolid. However, in spite of obtaining designs with crisp boundaries, some results can be difficult to manufacture due to the presence of multiple rounded cavities, which are introduced by the maximum size restriction with the sole purpose of avoiding thick solid members in the structure. To address this issue, in the second part of this article we propose a new geometric constraint that seeks to control the minimum separation distance between two solid members, also called the Minimum Gap (MinGap). Differently from MinVoid, MinGap introduces large void areas that do not necessarily have to be round. 2D and 3D test cases show that simultaneous control of MinSolid, MinVoid, MaxSolid and MinGap can be useful to improve the manufacturability of maximum size constrained designs.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
As a renewable and environment-friendly technology for seawater desalination and wastewater purification, solar energy triggered steam generation is attractive to address the long-standing global ...water scarcity issues. However, practical utilization of solar energy for steam generation is severely restricted by the complex synthesis, low energy conversion efficiency, insufficient solar spectrum absorption and water extraction capability of state-of-the-art technologies. Here, for the first time, we report a facile strategy to realize hydrogen bond induced self-assembly of a polydopamine (PDA)@MXene microsphere photothermal layer for synergistically achieving wide-spectrum and highly efficient solar absorption capability (≈ 96% in a wide solar spectrum range of 250–1,500 nm wavelength). Moreover, such a system renders fast water transport and vapor escaping due to the intrinsically hydrophilic nature of both MXene and PDA, as well as the interspacing between core-shell microspheres. The solar-to-vapor conversion efficiencies under the solar illumination of 1 sun and 4 sun are as high as 85.2% and 93.6%, respectively. Besides, the PDA@MXene photothermal layer renders the system durable mechanical properties, allowing producing clean water from seawater with the salt rejection rate beyond 99%. Furthermore, stable light absorption performance can be achieved and well maintained due to the formation of ternary TiO2/C/MXene complex caused by oxidative degradation of MXene. Therefore, this work proposes an attractive MXene-assisted strategy for fabricating high performance photothermal composites for advanced solar-driven seawater desalination applications.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OBVAL, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ