Alkaline water electrolysis (AWE) systems offer a cost‐effective and scalable approach for large‐scale hydrogen production using renewable energy sources. However, their susceptibility to load ...fluctuations, particularly the reverse‐current (RC) phenomenon during shutdown events, poses a significant challenge to the long‐term stability and scalability of these systems. Herein, a catalytic approach for enhancing the RC tolerance in AWE systems by using Pb‐decorated Ni cathode catalysts (Pb/Ni) is introduced. The oxidation of Pb/Ni by repeated RC lowers the electromotive force for the reverse current operation, and consequently, imparts RC tolerance. Intriguingly, contrary to the expectation that the decoration with lead, an inert material for the hydrogen evolution reaction (HER), will interfere with the hydrogen generation of the Ni catalyst, the presence of Pb on the Ni cathode after the RC flow promotes both the proton desorption and water‐dissociation steps, improving the HER activity. Furthermore, the AWE stack testing with Pb/Ni catalysts is perfectly operated, demonstrating remarkably enhanced RC tolerance during startup/shut‐down (SU/SD) testing protocol. This paper presents a new strategy for mitigating the AWE performance degradation induced by RC flow and for achieving Pb/Ni catalysts with improved operational durability against RC flow in AWE systems.
The transient stability of the catalyst caused by the reverse‐current phenomenon during the shutdown of the AWE system by load fluctuations is one of the most challenging limitations to address. This study introduces a catalytic approach for enhancing the RC by decorating lead on Ni catalysts. The surface decoration of the Ni catalyst with Pb (Pb/Ni) catalyst exhibits improved HER activity as well as remarkable RC‐flow resistance.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Diffusion-tensor imaging (DTI) is a noninvasive medical imaging tool used to investigate the structure of white matter. The signal contrast in DTI is generated by differences in the Brownian motion ...of the water molecules in brain tissue. Postprocessed DTI scalars can be used to evaluate changes in the brain tissue caused by disease, disease progression, and treatment responses, which has led to an enormous amount of interest in DTI in clinical research. This review article provides insights into DTI scalars and the biological background of DTI as a relatively new neuroimaging modality. Further, it summarizes the clinical role of DTI in various disease processes such as amyotrophic lateral sclerosis, multiple sclerosis, Parkinson's disease, Alzheimer's dementia, epilepsy, ischemic stroke, stroke with motor or language impairment, traumatic brain injury, spinal cord injury, and depression. Valuable DTI postprocessing tools for clinical research are also introduced.
Introduction
The aims of this study were to identify factors affecting the measurement of nerve cross‐sectional area (CSA) and to establish normal reference values for nerve ultrasonography of the ...upper extremity.
Methods
Ninety‐seven age‐matched, healthy individuals were enrolled. Ultrasonographic tests were performed by tracing nerves from the axilla to the distal arm. CSA was measured at the following locations: median nerve (carpal tunnel inlet, forearm, antecubital fossa, midhumerus); ulnar nerve (wrist, 2 cm proximal to the wrist, forearm, cubital tunnel outlet and inlet, midhumerus); radial nerve (spiral groove, antecubital fossa); and musculocutaneous nerve (proximal humerus).
Results
The CSA reference values differed between the measured points along the path of each nerve. Nerve CSA correlated significantly with weight, body mass index, height, and gender; however, the CSA ratio (distal/proximal) did not correlate with demographic factors.
Conclusions
The normal reference values may be helpful in diagnosis of pathologies involving these nerves. Muscle Nerve 47: 864–871, 2013
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
The measurement of skeletal muscle mass is essential for the diagnosis of sarcopenia. Muscle ultrasonography has emerged as a useful tool for evaluating sarcopenia because it can be used to assess ...muscle quality and quantity. This study investigated whether muscle ultrasonography is effective for estimating appendicular skeletal muscle mass (ASM) and screening for sarcopenia. This study prospectively enrolled 212 healthy volunteers aged 40-80 years. ASM was measured using the bioelectrical impedance analysis. Muscle thickness (MT) and echo-intensity (EI) were measured in four muscles (biceps brachii, BB; triceps brachii, TB; rectus femoris, RF; biceps femoris, BF) on the dominant hand. A hold-out cross-validation method was used to develop and validate the ASM prediction equation. In the model development group, the ASM prediction equations were deduced as follows: estimated ASM for men (kg) = 0.167 × weight (kg) + 0.228 × height (cm) + 0.143 × MT of BF (mm)- 0.822 × EI to MT ratio of BB- 28.187 (R2 = 0.830) and estimated ASM for women (kg) = 0.115 × weight + 0.215 × height (cm) + 0.139 × MT of RF-0.638 × EI to MT ratio of BB- 23.502 (R2 = 0.859). In the cross-validation group, the estimated ASM did not significantly differ from the measured ASM in both men (p = 0.775; intraclass correlation coefficient ICC = 0.948) and women (p = 0.516; ICC = 0.973). In addition, multiple logistic regression analysis revealed that the ratios of EI to MT in the BF and RF muscles in men and MT in the BB muscle in women could be valuable parameters for sarcopenia screening. Therefore, our study suggests that muscle ultrasound could be an effective tool for estimating ASM and screening sarcopenia.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Acquired myasthenia gravis (MG) is a prototype autoimmune disease of the neuromuscular junction, caused in most patients by autoantibodies to the muscle nicotinic acetylcholine receptor (AChR). There ...seem to be ethnic and regional differences in the frequency and clinical features of MG seronegative for the AChR antibody. This study aimed to describe the autoantibody profiles and clinical features of Korean patients with generalized MG seronegative for the AChR antibody. A total of 62 patients with a high index of clinical suspicion of seronegative generalized MG were identified from 18 centers, and we examined their sera for antibodies to clustered AChR, muscle-specific tyrosine kinase (MuSK), and low-density lipoprotein receptor-related protein 4 (LRP4) by cell-based assays (CBA) and to MuSK by radioimmunoprecipitation assay (RIPA). We also included 8 patients with ocular MG, 3 with Lambert-Eaton myasthenic syndrome, 5 with motor neuron disease, and 9 with other diagnoses as comparators for the serological testing. Antibodies were identified in 25/62 (40.3%) patients: 7 had antibodies to clustered AChR, 17 to MuSK, and 2 to LRP4. Three patients were double seropositive: 1 for MuSK and LRP4, and 2 for MuSK and clustered AChR. The patients with MuSK antibodies were mostly female (88.2%) and characterized by predominantly bulbar involvement (70%) and frequent myasthenic crises (58.3%). The patients with antibodies to clustered AChR, including 2 with ocular MG, tended to have a mild phenotype and good prognosis.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
This study deals with (a) the development of a prototype 3D printer for concrete structures having a bed size of 1 × 1 × 1 m for a laboratory testing and (b) laboratory testing of cementitious ...materials with different design mixes to find their suitability and efficacy for the developed 3D printer. In this printer, a program with the concept of computer numerical controlled milling was adopted to control the nozzle motion using an easy graphic user interface program. The experiment was carried out to test mechanical control and proper material properties of the printer. Thus, the optimum values of water-cement ratio of cementitious materials for the 3D concrete printer were determined by experimental trials. Also, the adequate viscosity of the material for layering and dispensing is determined by a slump-flow test. The suitable size of sands for the dispensing system was found through the trials. However, shrinkage cracks occurred during the hardening process for the paste and mortar that polyvinyl alcohol fibers are added to prevent the cracking and build an improved quality 3D printed structure. After suitable and efficient mix ratio is found, compressive strength is measured for the mechanical property. The experiments demonstrated possibility of printing concrete structure using the 3D printer.
The need for developing a simple and effective assessment tool for muscle mass has been increasing in a rapidly aging society. This study aimed to evaluate the feasibility of the surface ...electromyography (sEMG) parameters for estimating muscle mass. Overall, 212 healthy volunteers participated in this study. Maximal voluntary contraction (MVC) strength and root mean square (RMS) values of motor unit potentials from surface electrodes on each muscle (biceps brachii, triceps brachii, biceps femoris, rectus femoris) during isometric exercises of elbow flexion (EF), elbow extension (EE), knee flexion (KF), knee extension (KE) were acquired. New variables (MeanRMS, MaxRMS, and RatioRMS) were calculated from RMS values according to each exercise. Bioimpedance analysis (BIA) was performed to determine the segmental lean mass (SLM), segmental fat mass (SFM), and appendicular skeletal muscle mass (ASM). Muscle thicknesses were measured using ultrasonography (US). sEMG parameters showed positive correlations with MVC strength, SLM, ASM, and muscle thickness measured by US, but showed negative correlations with SFM. An equation was developed for ASM: ASM = -26.04 + 20.345 × Height + 0.178 × weight - 2.065 × (1, if female; 0, if male) + 0.327 × RatioRMS(KF) + 0.965 × MeanRMS(EE) (SEE = 1.167, adjusted R
= 0.934). sEMG parameters in controlled conditions may represent overall muscle strength and muscle mass in healthy individuals.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
PDF
