We present evidence of cubic Rashba spin splitting in a quasi-two-dimensional electron gas formed at a surface of (001) SrTiO3 single crystal from the weak localization or antilocalization (WAL) ...analysis of the low-temperature magnetoresistance. Our WAL data were well fitted by the model assuming mj=±3/2 for the spin-split pair, in which 2π rotation of the electron wave vector k∥ in the kx-ky plane accompanies 6π rotation of the spin quantization axis. This finding pertains to the p symmetry of the t2g electronic band derived from d electrons in SrTiO3, which provides insights into the surface electronic state of (001) SrTiO3.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UM
In September 2017, after more than a hundred years of quiescence, Ambae (Aoba), Vanuatu’s largest volcano, entered a new phase of eruptive activity, triggering the evacuation of the island’s 11,000 ...inhabitants resulting in the largest volcanic disaster in the country’s history. Three subsequent eruptive phases in November 2017, March 2018, and July 2018 expelled some of the largest tropospheric and stratospheric SO
2
clouds observed in the last decade. Here, we investigate the mechanisms and dynamics of this eruption. We use major elements, trace elements, and volatiles in olivine and clinopyroxene hosted melt inclusions, embayments, crystals, and matrix glasses together with clinopyroxene geobarometry and olivine, plagioclase, and clinopyroxene geothermometry to reconstruct the physical and chemical evolution of the magma, as it ascends to the surface. Volatile elements in melt inclusions and geobarometry data suggest that the magma originated from depth of ~ 14 km before residing at shallow (~ 0.5 to 3 km) levels. Magma ascent to the surface was likely facilitated by shallow phreatic eruptions that opened a pathway for magma to ascend. Succeeding eruptive phases are characterised by increasingly primitive compositions with evidence of small amounts of mixing having taken place. Mg–Fe exchange diffusion modelling yields olivine residence times in the magma chamber ranging from a few days to a year prior to eruption. Diffusion modelling of volatiles along embayments (melt channels) from the first two phases of activity and microlite number density suggests rapid magma ascent in the range of 15–270 km/h, 4–75 m/s (decompression rates of 0.1 to ~ 2 MPa/s) corresponding to a short travel time between the top of the shallow reservoir and the surface of less than 2 min.
Full text
Available for:
DOBA, EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, IZUM, KILJ, KISLJ, MFDPS, NLZOH, NUK, OBVAL, OILJ, PILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, SIK, UILJ, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Examination of an extensive major and trace element database for about 700 whole rocks from the Ecuadorian Andes reveals series of local trends typified by three volcanoes: Iliniza and Pichincha from ...the Western Cordillera and Tungurahua from the Eastern Cordillera. These local trends are included in a more scattered global trend that reflects typical across-arc chemical variations. The scatter of the global trend is attributed to greater crustal contributions or decreasing melt fractions. Trace element modelling shows that the local trends are consistent with mixing, and not with any fractional crystallization or progressive melting dominated processes. These local trends are extendable to include samples from other Ecuadorian volcanoes, suggesting that mixing processes are dominant throughout the region. Mixing model using trace and major element analyses identifies two end-members: low-silica, basaltic and high-silica, dacitic magmas. It also shows that mixing occurred between magmas after their segregation, rather than earlier mixing between the solid sources prior to melting. As a consequence, there must exist efficient magma-mixing processes that can overcome the obstacles to mixing magmas with contrasting physical properties, and can produce series of hybrid liquids over regional-scale. Model calculations show that estimated silicic end-members are primary magmas and are not co-magmatic derivatives of the corresponding mafic end-members. Lavas of Ecuadorian volcanoes are likely originated from magmas of contrasting origins, such as basaltic magmas generated by fluxed melting of peridotites in the mantle wedge and dacitic, adakite-type magmas originating from the slab or the mafic lower crust.
Full text
Available for:
DOBA, EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, IZUM, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, SIK, UILJ, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Abstract
Sulfur is a minor element in magmas but one of the major volatile elements released in volcanic systems, from the magma to the fluid phase upon ascent. Not only are sulfur gasses potentially ...toxic for humans and plants, they are also involved in causing drastic climate changes after major volcanic eruptions. Therefore, studies are carried out by the geoscience community to assess the magmatic sulfur flux by looking at the sulfur content and isotopes in erupted products, with the ultimate aim of improving understanding of the sulfur cycle in subduction zones. Kyushu Island in Japan hosts 25 volcanoes, among which 11 are active and represent a natural hazard for the local population. It is perhaps the most suitable site for the study of the sulfur cycle for its availability of recent volcanic deposits and its many highly monitored volcanoes. We investigated sulfur and sulfur isotope compositions of the magma source of Kyushu Island arc using olivine-hosted melt inclusions in mafic tephras and lavas, from eight volcanoes (nine Holocene samples) going from Northern Kyushu with Oninomi, Yufu, Kuju, and Aso, to Southern Kyushu volcanoes such as Kirishima-Ohachidake, Kirishima-Shinmoedake, Sumiyoshi-ike, and Kaimondake, and one back arc volcano, Fukue-Onidake. We measured major, trace and volatile elements and S isotopes (δ34S) in melt inclusions. Magma composition recorded in the inclusions ranges from basalt to andesite (SiO2 ranging from 40.3 to 60.7 wt%). For each edifice, we identified the least degassed and least differentiated compositions based on volatile and trace element systematics and selected the melt inclusions closest to their primitive melts. Comparing these primitive magmas, Sr/Y underlines a compositional dichotomy between volcanoes from northern (Sr/Y > 20) and southern Kyushu (Sr/Y < 20), separated by a non-volcanic area corresponding to the subduction of the Kyushu-Palau ridge. The δ34S in melt inclusions range from −0.32 ± 0.79‰ to +9.43 ± 0.47‰ (2σ) and trace the source of the magma from the different volcanoes, rather than degassing or crustal fractionation processes. δ34S is not fractionated by the nature of the fluid (aqueous or melt) metasomatizing the mantle wedge, therefore it is not the first-order factor controlling the sulfur isotope variations. Instead, this study illustrates the need for a heavy δ34S component, likely sulfate from seawater, contained in the agent that metasomatized the mantle beneath the arc. If such an observation is confirmed in other subduction zones, sulfur isotopes in melt inclusions may be an effective way to trace seawater input into the mantle beneath
Magma decompression rate is one of the most important parameters in controlling eruption dynamics. One way to determine decompression rate is by fitting a volatile elements diffusion profile to a ...concentration gradient in crystal‐hosted embayments. Previous studies have used a variety of diffusion models, limiting the possibility for inter‐study comparison. Here, we introduce EMBayment‐Estimated Rates (EMBER), a standalone versatile tool that models diffusion of volatile elements along melt embayments. Our model relies on the pdepe function of MATLAB to calculate diffusion profiles of H2O, CO2, and S through the finite difference method. EMBER uses a grid search seeking out the best fits for decompression rates, initial dissolved concentration of each studied volatile and initial exsolved gas content, while setting three constants: temperature along the ascent and pressure at the beginning and end of the ascent. Our model can compute the rate for basaltic, intermediate, and rhyolitic compositions. We applied EMBER to previous studies to evaluate and validate our model. We then reprocessed “homogeneously” the raw data from the literature for a comparison. In other words, the same protocol was used for each diffusion profiles removing the literature‐specific strategies used to constrain unknown parameters. With this comparison, we found a statistically significant positive correlation between maximum magma decompression rates and explosivity of the related eruption. EMBER is expected to help increase the number of volatile diffusion in embayments studies aiming at constraining magma decompression and ascent rates and to facilitate inter‐study comparisons.
Key Points
EMBayment‐Estimated Rates (EMBER) is a new, freely available, Graphical User Interface software that models magma ascent rates for basalt to rhyolite with H2O, CO2, and S diffusion profiles
EMBER was validated by reproducing previous published literature data
For mafic eruptions, we found a notable correlation between maximum recalculated decompression rates and eruption magnitude or plume height
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
The behavior of Fe3+ during mantle partial melting strongly influences the oxidation state of the resulting magmas, with implications for the evolution of the atmosphere's oxidation state. Here, we ...challenge a prevailing view that low‐degree partial melts are more oxidized due to the incompatible behavior of Fe3+. Our study is based on measurements of Fe3+/∑Fe along with major, minor, trace and volatile elements in olivine‐ and plagioclase‐hosted melt inclusions of CO2 undersaturated mantle melts in South West Indian Ridge lava. These inclusions record minimum entrapment pressures equivalent to depths up to 10 km below the seafloor, record magma ascent rates of 0.03–0.19 m/s, and display exceptionally high CO2/Ba, CO2/Rb, and CO2/Nb ratios, indicative of a CO2‐rich mantle source. Accounting for fractional crystallization, we find a uniform melt oxidation state (with an Fe3+/ΣFe at 0.140 ± 0.005 at MgO = 10 wt.%) that displays no systematic variation with major, minor, volatile or trace element contents, thus providing no evidence for a relationship between the degree of partial melting and Fe3+/ΣFe. This can be explained by efficient buffering of Fe3+/∑Fe and fO2 of mid‐ocean ridge basalt melts by their surrounding mantle and/or a decrease in the bulk peridotite‐melt Fe2O3 partition coefficient with increasing partial melting. We conclude that changes in the Earth's upper mantle temperature over geological time need not have affected the oxidation state of volcanic products or of the atmosphere.
Key Points
Discovery and characterization of a new suite of CO2‐undersaturated melt inclusions
High CO2/CITE ratio suggests a CO2‐rich mantle domain
No relation between degree of partial melting and Fe3+/ΣFe indicates efficient buffering or decreasing Fe2O3 partition coefficient with T
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Many aquatic invertebrates adjust their behavior to the degree of predation risk, which can be inferred from various sensory cues. We assessed the ability of the hermit crab
Pagurus minutus
to ...process different types of cues during predator avoidance and to discriminate between predators and non-predators by measuring the length of time that the hermit crabs remained retracted within their shells (hiding time) after exposure to visual cues, chemical cues, or both. Video images were used as visual cues, and water from aquaria holding predators or non-predators were used as chemical cues. The predator species was the portunid crab
Charybdis japonica
, and the non-predator species was the hermit crab
Clibanarius infraspinatus.
Natural seawater and background video were used as controls. Test individuals were exposed to each cue for 100 s. Both visual and chemical predator cues significantly increased hiding time in comparison to the controls, whereas non-predator cues did not significantly affect hiding time, indicating that
P. minutus
can discriminate between predators and non-predators from both visual and chemical cues. However, exposure to visual and chemical cues simultaneously did not significantly lengthen hiding times in comparison to exposure to a single cue type, indicating that there is no dominance in risk hierarchy between visual and chemical cues, and that
P. minutus
integrates information from both types of cues as if they were a single cue. We discuss the differences in our results from those previously obtained with a similar experimental design for the hermit crab
P. granosimanus
.
Significance statement
Animals must identify the most informative cues and integrate information from multiple cues to make the appropriate decisions for predator avoidance. When exposed to two types of cues, prey animals may assess them as a sign of multiple nearby predators even if the cues come from a single predator, leading to stronger response to two simultaneous cues than to either cue in isolation. It is still possible that prey animals integrate information from multiple cues as originating from a single predator. However, most studies have not fully considered this possibility. Our study revealed that
P. minutus
were able to discriminate between predators and non-predators from visual and chemical cues in isolation, but did not respond stronger to the simultaneous cues than to either cue in isolation. Our results suggest an example of non-additive response to multiple cues due to information redundancy among cue types.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, ODKLJ, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Constraining arc magma sources at continental arc settings is a delicate task, because chemical signatures from crustal processes obscure the slab and mantle signatures. Here, we present major, ...trace, and volatile element compositions of olivine-hosted melt inclusions (Fo
82–89
) selected from the most primitive lavas (Mg# > 60) from two Ecuadorian volcanoes (Puñalica and Sangay) situated at the southern termination of the Andean Northern Volcanic Zone. Melt inclusions (MI) from Puñalica are nepheline normative and have basaltic-to-basaltic-andesite compositions (45–56 wt% SiO
2
) similar to peridotite-derived melts. Sangay MI is also nepheline normative, with high CaO (up to 16 wt% and CaO/Al
2
O
3
< 1) and low silica contents (41.9–44.5 wt%) pointing out an amphibole-bearing clinopyroxenite source. Both volcanoes display volatile-rich compositions (up to 6100 ppm Cl, 2200 ppm F, and 6700 ppm S). These MI cannot be related to their host lavas by fractional crystallization, implying that they represent true primitive liquids. The source of Puñalica MI was metasomatized by slab-derived melts that imprints its low Ba/Th, Sr/Th, and high Th/La (average values of 66, 129, and 0.22, respectively). On the contrary, the slab component added to the source of Sangay MI has a higher Ba/Th, Sr/Th, and low Th/La (average values of 261, 517, and 0.11, respectively) which could suggest a relative contribution of aqueous fluids. This dichotomy is related to the presence of the Grijalva Fracture Zone that separates a younger and hotter oceanic crust to the north (below Puñalica) from a colder and older oceanic crust to the south (below Sangay).
Full text
Available for:
DOBA, EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, IZUM, KILJ, KISLJ, MFDPS, NLZOH, NUK, OBVAL, OILJ, PILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, SIK, UILJ, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
The aim of this study was to examine the efficacy and safety of autogenous partially demineralized dentin matrix (APDDM) prepared onsite, for clinical application in bone regeneration procedures ...related to implant dentistry, including socket preservation, alveolar ridge augmentation, and maxillary sinus floor augmentation. In this study, 16 patients underwent dental implant placement using APDDM transplantation. There were no systemic or local complications (including surgical site infection) in any of the cases, and oral rehabilitation using dental implants was successful in all cases for at least 2 years after attachment of the suprastructure. This report describes the clinical application of APDDM prepared immediately after tooth extraction to bone augmentation, taking advantage of the relatively short preparation time due to partial demineralization. APDDM, as introduced in this study, is an efficient, safe, and reasonable bone substitute. Consequently, this material has the potential to become one of the options as a bone substitute in implant dentistry.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
Volcanic gas emission is considered to reflect the degassing of magma beneath volcanoes. The combined observations of gas measurement and petrological study are expected to constrain the volatile ...concentrations and storage depths of the pre-eruptive and primitive magma. Aso volcano (Japan) is a constantly-monitored, persistently-degassing volcano, and an ideal site to acquire gas and petrologic data. We analyzed the melt inclusions and phenocryst minerals of Holocene basaltic eruption products, and reported their major and volatile element concentrations. The samples showed abundant evidence of magma mixing, such as reverse mineral zoning, and highly variable mineral and glass compositions. SiO
2
measured in melt inclusions varied from 46.0–65.8 wt. %. High-volatile concentration, S up to 3750 ppm, was only found in mafic melt inclusions hosted by high-Fo olivine phenocrysts (~ Fo82). The pre-eruptive storage depths were determined from volatile concentrations: 2 and 4 km depth for Strombolian eruption and sub-Plinian eruption, respectively. The volatile-rich primitive magma, one end member of the mixed-magma, originated from a deeper level (> 10 km) than these magma reservoirs. Initial volatile concentrations of the primitive magma were determined using multiple constraints: > 4.68 wt. % H
2
O, 400—750 ppm CO
2
, 3750 ppm S, 716 ppm Cl, and 324 ppm F. The observed variation of volcanic gas composition was best explained by the mixing of the gas segregated from at least a depth of 10 km, with that from the shallow reservoirs. This study illustrated the method to identify the primitive mafic magma responsible for deep volatile flux in a mature volcano with complex magmatic processes.
Full text
Available for:
DOBA, EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, IZUM, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, SIK, UILJ, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ