A hundred years on, the energy‐intensive Haber–Bosch process continues to turn the N2 in air into fertilizer, nourishing billions of people while causing pollution and greenhouse gas emissions. The ...urgency of mitigating climate change motivates society to progress toward a more sustainable method for fixing N2 that is based on clean energy. Surface oxygen vacancies (surface Ovac) hold great potential for N2 adsorption and activation, but introducing Ovac on the very surface without affecting bulk properties remains a great challenge. Fine tuning of the surface Ovac by atomic layer deposition is described, forming a thin amorphous TiO2 layer on plasmon‐enhanced rutile TiO2/Au nanorods. Surface Ovac in the outer amorphous TiO2 thin layer promote the adsorption and activation of N2, which facilitates N2 reduction to ammonia by excited electrons from ultraviolet‐light‐driven TiO2 and visible‐light‐driven Au surface plasmons. The findings offer a new approach to N2 photofixation under ambient conditions (that is, room temperature and atmospheric pressure).
Surface oxygen vacancies play a promotional role in the outer amorphous TiO2 (a‐TiO2) thin layer during the adsorption and activation of N2. The process facilitates N2 reduction to ammonia by excited electrons derived from UV‐light‐driven rutile TiO2 nanorod arrays and visible‐light‐driven gold surface plasmons.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Long nanopore reads are advantageous in de novo genome assembly. However, nanopore reads usually have broad error distribution and high-error-rate subsequences. Existing error correction tools cannot ...correct nanopore reads efficiently and effectively. Most methods trim high-error-rate subsequences during error correction, which reduces both the length of the reads and contiguity of the final assembly. Here, we develop an error correction, and de novo assembly tool designed to overcome complex errors in nanopore reads. We propose an adaptive read selection and two-step progressive method to quickly correct nanopore reads to high accuracy. We introduce a two-stage assembler to utilize the full length of nanopore reads. Our tool achieves superior performance in both error correction and de novo assembling nanopore reads. It requires only 8122 hours to assemble a 35X coverage human genome and achieves a 2.47-fold improvement in NG50. Furthermore, our assembly of the human WERI cell line shows an NG50 of 22 Mbp. The high-quality assembly of nanopore reads can significantly reduce false positives in structure variation detection.
A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (Ovac) at the surface of BiVO4 photoanode, by 10‐minute ...photoetching. This strategy could induce enriched Ovac at the surface of BiVO4, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO4 /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO4 with enriched surface Ovac presents the highest photocurrent among undoped BiVO4 photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO4 photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm−2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO4 photoanode and a Si photocathode under 1 sun illumination.
Surface oxygen vacancies play a significant role in BiVO4 photoanodes during the solar water splitting. Photoetching effectively introduce the surface oxygen vacancies on BiVO4 photoanodes, which enhances the charge separation at the BiVO4/electrolyte interface.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Single-atom catalysts (SACs) with atomically dispersed metals have emerged as a new class of heterogeneous catalysts and have attracted considerable interest because they offer 100% metal atom ...utilization and show excellent catalytic behavior compared with traditionally supported nano-particles. However, it is challenging to explore the active sites and catalytic mechanisms of SACs through common characterization methods due to the isolated single atoms. Therefore, employing theoretical calculations to determine the nature of SACs' active sites and the reaction mechanisms is particularly meaningful. This paper describes the nature of SACs by summarizing the diverse applications and properties of SACs, which starts from computational simulation on a couple of important applications of SACs. Then the distinctive and fundamental properties of SACs are discussed. At last, the challenges and future perspectives of computational calculations for SACs are outlined.
Schematic diagram of theoretical models and applications of single atom catalysts. A review on the theoretical models, intrinsic properties, and the related application of SACs.
The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt‐based catalysts ...still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru‐based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large‐scale applications. This paper describes the construction of the ultrathin defect‐enriched 3D Se‐(NiCo)Sx/(OH)x nanosheets for overall water splitting through a facile Se‐induced hydrothermal treatment. Via Se‐induced fabrication, highly efficient Se‐(NiCo)Sx/(OH)x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as‐prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm−2 for OER and HER, respectively. Moreover, an overall water‐splitting device delivers a current density of 10 mA cm−2 for ≈66 h without obvious degradation.
The construction of ultrathin defectenriched Se‐(NiCo)Sx/(OH)x nanosheets through a facile Se‐induced hydrothermal treatment is described. Benefiting from morphological optimization, defect engineering, and tailoring of the electronic structure, Se‐(NiCo)Sx/(OH)x exhibits highly efficient activity and long‐term stability for oxygen evolution, hydrogen evolution, and overall water splitting.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
It is of great significance to reveal the detailed mechanism of neighboring effects between monomers, as they could not only affect the intermediate bonding but also change the reaction pathway. This ...paper describes the electronic effect between neighboring Zn/Co monomers effectively promoting CO2 electroreduction to CO. Zn and Co atoms coordinated on N doped carbon (ZnCoNC) show a CO faradaic efficiency of 93.2 % at −0.5 V versus RHE during a 30‐hours test. Extended X‐ray absorption fine structure measurements (EXAFS) indicated no direct metal–metal bonding and X‐ray absorption near‐edge structure (XANES) showed the electronic effect between Zn/Co monomers. In situ attenuated total reflection‐infrared spectroscopy (ATR‐IR) and density functional theory (DFT) calculations further revealed that the electronic effect between Zn/Co enhanced the *COOH intermediate bonding on Zn sites and thus promoted CO production. This work could act as a promising way to reveal the mechanism of neighboring monomers and to influence catalysis.
The electronic effect between neighboring Zn/Co monomers that effectively enhances the *COOH adsorption and thus boosts CO2 electroreduction to CO is described.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Copper can efficiently electro‐catalyze carbon dioxide reduction to C2+ products (C2H4, C2H5OH, n‐propanol). However, the correlation between the activity and active sites remains ambiguous, impeding ...further improvements in their performance. The facet effect of copper crystals to promote CO adsorption and C−C coupling and consequently yield a superior selectivity for C2+ products is described. We achieve a high Faradaic efficiency (FE) of 87 % and a large partial current density of 217 mA cm−2 toward C2+ products on Cu(OH)2‐D at only −0.54 V versus the reversible hydrogen electrode in a flow‐cell electrolyzer. With further coupled to a Si solar cell, record‐high solar conversion efficiencies of 4.47 % and 6.4 % are achieved for C2H4 and C2+ products, respectively. This study provides an in‐depth understanding of the selective formation of C2+ products on Cu and paves the way for the practical application of electrocatalytic or solar‐driven CO2 reduction.
The facet effect of copper crystals to promote CO adsorption and C−C coupling and consequently yield a superior selectivity (87 % Faradaic efficiency) for C2+ products is described. Record‐high solar conversion efficiencies of 4.47 % and 6.4 % are achieved for C2H4 and C2+ products, respectively.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
During the outbreak of coronavirus disease 2019 (COVID-19), consistent and considerable differences in disease severity and mortality rate of patients treated in Hubei province compared to those in ...other parts of China have been observed. We sought to compare the clinical characteristics and outcomes of patients being treated inside and outside Hubei province, and explore the factors underlying these differences.
Collaborating with the National Health Commission, we established a retrospective cohort to study hospitalised COVID-19 cases in China. Clinical characteristics, the rate of severe events and deaths, and the time to critical illness (invasive ventilation or intensive care unit admission or death) were compared between patients within and outside Hubei. The impact of Wuhan-related exposure (a presumed key factor that drove the severe situation in Hubei, as Wuhan is the epicentre as well the administrative centre of Hubei province) and the duration between symptom onset and admission on prognosis were also determined.
At the data cut-off (31 January 2020), 1590 cases from 575 hospitals in 31 provincial administrative regions were collected (core cohort). The overall rate of severe cases and mortality was 16.0% and 3.2%, respectively. Patients in Hubei (predominantly with Wuhan-related exposure, 597 (92.3%) out of 647) were older (mean age 49.7
44.9 years), had more cases with comorbidity (32.9%
19.7%), higher symptomatic burden, abnormal radiologic manifestations and, especially, a longer waiting time between symptom onset and admission (5.7
4.5 days) compared with patients outside Hubei. Patients in Hubei (severe event rate 23.0%
11.1%, death rate 7.3%
0.3%, HR (95% CI) for critical illness 1.59 (1.05-2.41)) have a poorer prognosis compared with patients outside Hubei after adjusting for age and comorbidity. However, among patients outside Hubei, the duration from symptom onset to hospitalisation (mean 4.4
4.7 days) and prognosis (HR (95%) 0.84 (0.40-1.80)) were similar between patients with or without Wuhan-related exposure. In the overall population, the waiting time, but neither treated in Hubei nor Wuhan-related exposure, remained an independent prognostic factor (HR (95%) 1.05 (1.01-1.08)).
There were more severe cases and poorer outcomes for COVID-19 patients treated in Hubei, which might be attributed to the prolonged duration of symptom onset to hospitalisation in the epicentre. Future studies to determine the reason for delaying hospitalisation are warranted.
Cu‐based electrocatalysts facilitate CO2 electrochemical reduction (CO2ER) to produce multi‐carbon products. However, the roles of Cu0 and Cu+ and the mechanistic understanding remain elusive. This ...paper describes the controllable construction of Cu0‐Cu+ sites derived from the well‐dispersed cupric oxide particles supported on copper phyllosilicate lamella to enhance CO2ER performance. 20 % Cu/CuSiO3 shows the superior CO2ER performance with 51.8 % C2H4 Faraday efficiency at −1.1 V vs reversible hydrogen electrode during the 6 hour test. In situ attenuated total reflection infrared spectra and density functional theory (DFT) calculations were employed to elucidate the reaction mechanism. The enhancement in CO2ER activity is mainly attributed to the synergism of Cu0‐Cu+ pairs: Cu0 activates CO2 and facilitates the following electron transfers; Cu+ strengthens *CO adsorption to further boost C−C coupling. We provide a strategy to rationally design Cu‐based catalysts with viable valence states to boost CO2ER.
Controllable Cu0‐Cu+ pairs derived from the well‐dispersed cupric oxide supported on copper phyllosilicate lamella can break thermodynamic and kinetic limitations of CO2 reduction reaction and achieve the superior CO2 electroreduction performance.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Noble-metal alloys are widely used as heterogeneous catalysts. However, due to the existence of scaling properties of adsorption energies on transition metal surfaces, the enhancement of catalytic ...activity is frequently accompanied by side reactions leading to a reduction in selectivity for the target product. Herein, we describe an approach to breaking the scaling relationship for propane dehydrogenation, an industrially important reaction, by assembling single atom alloys (SAAs), to achieve simultaneous enhancement of propylene selectivity and propane conversion. We synthesize γ-alumina-supported platinum/copper SAA catalysts by incipient wetness co-impregnation method with a high copper to platinum ratio. Single platinum atoms dispersed on copper nanoparticles dramatically enhance the desorption of surface-bounded propylene and prohibit its further dehydrogenation, resulting in high propylene selectivity (~90%). Unlike previous reported SAA applications at low temperatures (<400 °C), Pt/Cu SAA shows excellent stability of more than 120 h of operation under atmospheric pressure at 520 °C.