While sodium-ion batteries (SIBs) hold great promise for large-scale electric energy storage and low speed electric vehicles, the poor capacity retention of the cathode is one of the bottlenecks in ...the development of SIBs. Following a strategy of using lithium doping in the transition-metal layer to stabilize the desodiated structure, we have designed and successfully synthesized a novel layered oxide cathode P2–Na0.66Li0.18Fe0.12Mn0.7O2, which demonstrated a high capacity of 190 mAh g–1 and a remarkably high capacity retention of ∼87% after 80 cycles within a wide voltage range of 1.5–4.5 V. The outstanding stability is attributed to the reversible migration of lithium during cycling and the elimination of the detrimental P2–O2 phase transition, revealed by ex situ and in situ X-ray diffraction and solid-state nuclear magnetic resonance spectroscopy.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
The large-voltage hysteresis remains one of the biggest barriers to optimizing Li/Na-ion cathodes using lattice anionic redox reaction, despite their very high energy density and relative low cost. ...Very recently, a layered sodium cathode Na2Mn3O7 (or Na4/7Mn6/7□1/7O2, □ is vacancy) was reported to have reversible lattice oxygen redox with much suppressed voltage hysteresis. However, the structural and electronic structural origin of this small-voltage hysteresis has not been well understood. In this article, through systematic studies using ex situ/in situ electron paramagnetic resonance and X-ray diffraction, we demonstrate that the exceptional small-voltage hysteresis (<50 mV) between charge and discharge curves is rooted in the well-maintained oxygen stacking sequence in the absence of irreversible gliding of oxygen layers and cation migration from the transition-metal layers. In addition, we further identify that the 4.2 V charge/discharge plateau is associated with a zero-strain (de)intercalation process of Na+ ions from distorted octahedral sites, while the 4.5 V plateau is linked to a reversible shrink/expansion process of the manganese-site vacancy during (de)intercalation of Na+ ions at distorted prismatic sites. It is expected that these findings will inspire further exploration of new cathode materials that can achieve both high energy density and efficiency by using lattice anionic redox.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Argyrodites, with fast lithium-ion conduction, are promising for applications in rechargeable solid-state lithium-ion batteries. In this article, we report a new compositional space of argyrodite ...superionic conductors, Li6–xPS5–xClBrx 0 ≤ x ≤ 0.8, with a remarkably high ionic conductivity of 24 mS/cm at 25 °C for Li5.3PS4.3ClBr0.7. In addition, the extremely low lithium migration barrier of 0.155 eV makes Li5.3PS4.3ClBr0.7 highly promising for low-temperature operation. Average and local structure analyses reveal that bromination (x > 0) leads to (i) retention of the parent Li6PS5Cl structure for a wide range of x in Li6–xPS5–xClBrx (0 ≤ x ≤ 0.7), (ii) co-occupancy of Cl–, Br–, and S2– at 4a/4d sites, and (iii) gradually increased Li+-ion dynamics, eventually yielding a “liquid-like” Li-sublattice with a flattened energy landscape when x approaches 0.7. In addition, the diversity of anion species and Li-deficiency in halogen-rich Li6–xPS5–xClBrx induce hypercoordination and coordination entropy for the Li-sublattice, also leading to enhanced Li+-ion transport in Li6–xPS5–xClBrx. This study demonstrates that mixed-anion framework can help stabilize highly conductive structures in a compositional space otherwise unstable with lower anion diversity.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
The correlation between lattice chemistry and cation migration in high‐entropy Li+ conductors is not fully understood due to challenges in characterizing anion disorder. To address this ...issue, argyrodite family of Li+ conductors, which enables structural engineering of the anion lattice, is investigated. Specifically, new argyrodites, Li5.3PS4.3Cl1.7−xBrx (0 ≤ x ≤ 1.7), with varying anion entropy are synthesized and X‐ray diffraction, neutron scattering, and multinuclear high‐resolution solid‐state nuclear magnetic resonance (NMR) are used to determine the resulting structures. Ion and lattice dynamics are determined using variable‐temperature multinuclear NMR relaxometry and maximum entropy method analysis of neutron scattering, aided by constrained ab initio molecular dynamics calculations. 15 atomic configurations of anion arrangements are identified, producing a wide range of local lattice dynamics. High entropy in the lattice structure, composition, and dynamics stabilize otherwise metastable Li‐deficient structures and flatten the energy landscape for cation migration. This resulted in the highest room‐temperature ionic conductivity of 26 mS cm−1 and a low activation energy of 0.155 eV realized in Li5.3PS4.3Cl0.7Br, where anion disorder is maximized. This study sheds light on the complex structure–property relationships of high‐entropy superionic conductors, highlighting the significance of heterogeneity in lattice dynamics.
This study explores Li+ conductors in the argyrodite family, uncovering how anion lattice chemistry affects cation migration. The results reveal anion sublattices of high chemical and structural disorder enhance PS43− re‐orientation, leading to fast Li+‐ion conduction with low activation energy barriers via correlated Li+‐PS43− motion.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Optimizing charge transfer and alleviating volume expansion in electrode materials are critical to maximize electrochemical performance for energy storage systems. Herein, an atomically thin ...soft-rigid Co
S
@MoS
core-shell heterostructure with dual cation vacancies at the atomic interface is constructed as a promising anode for high-performance sodium-ion batteries. The dual cation vacancies involving V
and V
in the heterostructure and the soft MoS
shell afford ionic pathways for rapid charge transfer, as well as the rigid Co
S
core acts as the dominant active component and resists structural deformation during charge/discharge. Electrochemical testing and theoretical calculations demonstrate both excellent Na
transfer kinetics and pseudocapacitive behavior. Consequently, the soft-rigid heterostructure delivers extraordinary sodium storage performance (389.7 mA h g
after 500 cycles at 5.0 A g
), superior to those of the single-phase counterparts; and the assembled Na
V
(PO
)
||d-Co
S
@MoS
/S-Gr full cell achieves an energy density of 235.5 Wh kg
at 0.5 C. Our finding opens up a new strategy of soft-rigid heterostructure and broadens the horizons of material design in energy storage and conversion. This article is protected by copyright. All rights reserved.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Flexible and low-cost poly(ethylene oxide) (PEO)-based electrolytes are promising for all-solid-state Li-metal batteries because of their compatibility with a metallic lithium anode. However, the low ...room-temperature Li-ion conductivity of PEO solid electrolytes and severe lithium-dendrite growth limit their application in high-energy Li-metal batteries. Here we prepared a PEO/perovskite Li3/8Sr7/16Ta3/4Zr1/4O₃ composite electrolyte with a Li-ion conductivity of 5.4 × 10−5 and 3.5 × 10−4 S cm−1 at 25 and 45 °C, respectively; the strong interaction between the F⁻ of TFSI⁻ (bistrifluoromethanesulfonimide) and the surface Ta5+ of the perovskite improves the Li-ion transport at the PEO/perovskite interface. A symmetric Li/composite electrolyte/Li cell shows an excellent cyclability at a high current density up to 0.6 mA cm−2. A solid electrolyte interphase layer formed in situ between the metallic lithium anode and the composite electrolyte suppresses lithium-dendrite formation and growth. All-solid-state Li|LiFePO₄ and high-voltage Li|LiNi0.8Mn0.1Co0.1O₂ batteries with the composite electrolyte have an impressive performance with high Coulombic efficiencies, small overpotentials, and good cycling stability.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK
Metal fluorides/oxides (MF(x)/M(x)O(y)) are promising electrodes for lithium-ion batteries that operate through conversion reactions. These reactions are associated with much higher energy densities ...than intercalation reactions. The fluorides/oxides also exhibit additional reversible capacity beyond their theoretical capacity through mechanisms that are still poorly understood, in part owing to the difficulty in characterizing structure at the nanoscale, particularly at buried interfaces. This study employs high-resolution multinuclear/multidimensional solid-state NMR techniques, with in situ synchrotron-based techniques, to study the prototype conversion material RuO2. The experiments, together with theoretical calculations, show that a major contribution to the extra capacity in this system is due to the generation of LiOH and its subsequent reversible reaction with Li to form Li2O and LiH. The research demonstrates a protocol for studying the structure and spatial proximities of nanostructures formed in this system, including the amorphous solid electrolyte interphase that grows on battery electrodes.
Full text
Available for:
IJS, IZUM, KILJ, KISLJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
The performance of all‐solid‐state batteries (ASSBs) relies on the Li+ transport and stability characteristics of solid electrolytes (SEs). Li3PS4 is notable for its stability against lithium metal, ...yet its ionic conductivity remains a limiting factor. This study leverages local structural disorder via O substitution to achieve an ionic conductivity of 1.38 mS cm−1 with an activation energy of 0.34 eV for Li3PS4−xOx (x = 0.31). Optimal O substitution transforms Li+ transport from 2D to 3D pathways with increased ion mobility. Li3PS3.69O0.31 exhibits improvements in the critical current density and stability against Li metal and retains its electrochemical stability window compared with Li3PS4. The practical implementation of Li3PS3.69O0.31 in ASSBs half‐cells, particularly when coupled with TiS2 as the cathode active material, demonstrates substantially enhanced capacity and rate performance. This work elucidates the utility of introducing local structural disorder to ameliorate SE properties and highlights the benefits of strategically combining the inherent strengths of sulfides and oxides via creating oxysulfide SEs.
Optimal O substitution in Li3PS4−xOx (x = 0.31) enhances Li+ transport, yielding improved critical current density (CCD) and stability against Li metal. However, excessive O substitution, x > 0.31, leads to short‐range Li+ transport and the formation of low‐conducting lithium phosphates, thereby compromising Li+ conductivity.
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Background Malnutrition or insufficient physical activity (PA) is a risk factor for obesity and chronic disease in children and adolescents. Affected by different economic circumstance, ethnic, ...dietary behavior, physical activity and other factors, children and adolescents in Xinjiang, China are facing a severe situation of overweight and obesity prevention and control. It is necessary to analyze the dietary behavior and physical activity of children and adolescents with different nutritional status and the relationship between them. Methods Using a stratified cluster sampling method in Xinjiang, China, 4833 middle school students aged 13-18 were selected., and tests for height and weight were conducted. Self-assessment questionnaires were completed for Dietary Behaviors, Physical Activity, and Sedentary Behaviors as well. Chi-square test, Logistic regression analysis and other methods were used to analyze the relationship between Dietary Behaviors, Physical Activity, Sedentary Behaviors and other health behavior risk factors and Weight and BMI. Results Children and adolescents aged 13-18 in Xinjiang, China, girls had a lower BMI compared with boys(19.49 VS. 20.41). The proportions of Underweight, Overweight and Obese among girls were lower (Underweight: 11.8 VS. 14.5; Overweight: 7.6 VS. 12.7; Obese 2.3 VS. 7.0).Boys with higher risk of sedentary had a 1.46-fold higher risk of developing Overweight/Obese than those with lower risk of sedentary (95%CI: 1.07-2.01).Girls with higher risky diet had a 1.56-fold higher risk of developing Underweight than those with lower risky diet (95%CI: 1.11-2.19). For all participants, the risk of Overweight/Obese in children and adolescents with higher risk of sedentary was 1.45 times more than that of children and adolescents with lower Risk sedentary (95%CI: 1.12 ~ 1.88). Overall, Weight had a significant correlation with PA risk (r = 0.076, P < 0.01) and sedentary behavior risk (r = 0.035, P < 0.05). BMI had a key correlation with PA risk (r = 0.064, P < 0.01) and sedentary behavior risk (r = 0.037, P < 0.05). Conclusions The detection rate of Underweight among children and adolescents aged 13-18 in Xinjiang, China is higher, while the detection rate of Overweight and Obese is lower than that of the whole country. Static behavior was an important factor affecting the occurrence of Overweight and Obese in children and adolescents, and the performance of boys was more obvious than that of girls.The results further improve the data on the weight status of Chinese children and adolescents and their influencing factors, and call on Chinese society and schools to continue their efforts to prevent and reduce malnutrition and obesity among children and adolescents in Xinjiang. Keywords: Xinjiang China, Children and adolescents, Nutritional status, Eating behavior, Physical activity, Cross-sectional analysis
Optical physical unclonable functions (PUFs) have been proven to be one of the most effective anti‐counterfeiting strategies. However, optical PUFs endowed with flexibility and biocompatibility have ...not been developed, limiting their application scenarios. Herein, biocompatible and flexible optical PUF labels are developed by randomly embedding microdiamonds in silk fibroin films. The PUF labels can be conformally attached onto the surface of complex shaped objects, providing the desired protection against fake and interior products. In this system, silk fibroin films serve as a flexible and biocompatible substrate, while the Raman signal of the microdiamonds serves as response of the excitation. The extremely high stability and random distribution of the microdiamonds ensure the performance of PUFs, and the maximum encoding capability of 210000 is finally realized. The cytotoxicity analysis results also verify the biosafety of the PUF system. In addition, the as‐prepared PUF labels are attached onto the surface of polyethylene material, and human skin, and even have been implanted under chicken skin tissue, promising their practical applications.
Flexible and biocompatible physical unclonable function labels are designed and demonstrated by using microdiamonds as the response of the excitation and silk fibroin films as a flexible and biocompatible substrate, which have been applied for protection against fake objects with complex shapes.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK