An injectable formulation of rapamycin was prepared using amphiphilic block co-polymer micelles of poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG–PCL). Drug-loaded PEG–PCL micelles were prepared ...by a co-solvent extraction technique. Resulting PEG–PCL micelles were less than 100 nm in diameter and contained rapamycin at 7% to 10% weight and >1 mg/mL. PEG–PCL micelles released rapamycin over several days, t50% 31 h, with no burst release; however, physiological concentrations of serum albumin increased the release rate 3-fold. Alpha-tocopherol, vitamin E, was co-incorporated into PEG–PCL micelles and increased the efficiency of rapamycin encapsulation. The addition of α-tocopherol also slowed the release of rapamycin from PEG–PCL micelles in the presence of serum albumin, t50% 39 h.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Background Urogenital schistosomiasis is prevalent in many malaria endemic regions of sub-Saharan Africa and can lead to long-term health consequences if untreated. Antimalarial drugs used to treat ...uncomplicated malaria have shown to exert some activity against Schistosoma haematobium. Here, we explore the efficacy on concomitant urogenital schistosomiasis of first-line recommended artemisinin-based combination therapies (ACTs) and investigational second-generation ACTs when administered for the treatment of uncomplicated malaria in Gabon. Methods Microscopic determination of urogenital schistosomiasis was performed from urine samples collected from patients with confirmed uncomplicated malaria. Egg excretion reduction rate and cure rate were determined at 4-weeks and 6-weeks post-treatment with either artesunate-pyronaridine, artemether-lumefantrine, artesunate-amodiaquine or artefenomel-ferroquine. Results Fifty-two (16%) out of 322 malaria patients were co-infected with urogenital schistosomiasis and were treated with antimalarial drug combinations. Schistosoma haematobium egg excretion rates showed a median reduction of 100% (interquartile range (IQR), 17% to 100%) and 65% (IQR, -133% to 100%) at 4-weeks and 6-weeks post-treatment, respectively, in the artesunate-pyronaridine group (n = 20) compared to 35% (IQR, -250% to 70%) and 65% (IQR, -65% to 79%) in the artemether-lumefantrine group (n = 18). Artesunate-amodiaquine (n = 2) and artefenomel-ferroquine combination (n = 3) were not able to reduce the rate of eggs excreted in this limited number of patients. In addition, cure rates were 56% and 37% at 4- and 6-weeks post-treatment, respectively, with artesunate-pyronaridine and no cases of cure were observed for the other antimalarial combinations. Conclusions Antimalarial treatments with artesunate-pyronaridine and artemether-lumefantrine reduced the excretion of S. haematobium eggs, comforting the hypothesis that antimalarial drugs could play a role in the control of schistosomiasis. Trial Registration This trial is registered with clinicaltrials.gov, under the Identifier NCT04264130.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Neonatal sepsis is a major cause of infant mortality in developing countries because of delayed injectable treatment, making it urgent to develop noninjectable formulations that can reduce treatment ...delays in resource-limited settings. Ceftriaxone, available only for injection, needs absorption enhancers to achieve adequate bioavailability via nonparenteral administration. This article presents all available data on the nonparenteral absorption of ceftriaxone in humans and animals, including unpublished work carried out by F. Hoffmann-La Roche (Roche) in the 1980s and new data from preclinical studies with rabbits, and discusses the importance of these data for the development of noninjectable formulations for noninvasive treatment. The combined results indicate that the rectal absorption of ceftriaxone is feasible and likely to lead to a bioavailable formulation that can reduce treatment delays in neonatal sepsis. A bile salt, chenodeoxycholate sodium salt (Na-CDC), used as an absorption enhancer at a 125-mg dose, together with a 500-mg dose of ceftriaxone provided 24% rectal absorption of ceftriaxone and a maximal plasma concentration of 21 µg/ml with good tolerance in human subjects. The rabbit model developed can also be used to screen for the bioavailability of other formulations before assessment in humans.
Purpose
To present a novel approach of greatly enhancing aqueous solubility of a model weakly basic drug, haloperidol, by using weak acids that would not form salts with the drug and to attain ...physically stable form of amorphous drug by drying such aqueous solutions.
Method
Aqueous solubility of haloperidol in presence of increasing concentrations of four different weak organic acids (malic, tartaric, citric, fumaric) were determined. Several concentrated aqueous solutions with differing drug-to-acid molar ratios were dried in vacuum oven, and dried materials were characterized by DSC, powder XRD, dissolution testing, and stability study.
Result
Acids were selected such that they would not form salts with haloperidol. Haloperidol solubility increased greatly with increased concentrations of malic, tartaric and citric acids, reaching >300 mg/g of solution. In contrast to the haloperidol HCl aqueous solubility of 4 mg/g, this may be called supersolubilization. Fumaric acid did not cause such solubilization as it had low water solubility. Dried solids formed dispersions of amorphous haloperidol in acids that were either amorphous or partially crystalline. Amorphous haloperidol was physically stable and had better dissolution rate than HCl salt.
Conclusion
A novel method of drug solubilization in aqueous media by acid–base interaction is presented. Physically stable amorphous systems of drugs may also be prepared by using this organic solvent-free approach.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Incomplete drug release and particle size-dependent dissolution performance can compromise the quality of controlled release matrix systems. The objective of the current study was to investigate the ...ability of citric acid monohydrate (CA MH) to enhance the release of diltiazem hydrochloride from melt extruded Eudragit
® RS PO tablets and to eliminate drug particle size effects. Preformulation studies demonstrated the thermal stability of all components, drug insolubility in the polymer but miscibility with the CA MH. Tablets with either constant polymer levels or constant drug-to-polymer ratios and containing different drug particle size fractions and increasing amounts of CA MH were manufactured by melt extrusion and characterized by dissolution testing, powder X-ray diffraction and scanning electron microscopy. The addition of CA MH to the formulation promoted the thermal processibility and matrix integrity by plasticization of the polymer. The drug release from systems with constant drug-to-polymer ratio was significantly increased when CA MH was added as a result of enhanced pore formation. Particle size effects were eliminated when large amounts of CA MH were used due to the loss of drug crystallinity. Matrix tablets with CA MH furthermore showed a faster and more complete drug release compared to systems with drug only or alternative pore formers (sucrose, NaCl, or PEG 3350). The enhanced drug release was attributed to the amorphous character of the soluble components, improved drug dispersion in the plasticized polymer along with increased polymer permeability. In summary, CA MH promoted the miscibility between the drug and Eudragit
® RS PO during hot-melt extrusion, resulting in the extrusion of an amorphous system with improved dissolution characteristics.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The impact of melt extrusion (HME) and spray drying (SD) on mechanical properties of hypromellose acetate succinate (HPMCAS), copovidone, and their formulated blends was studied and compared with ...that of reference excipients. Tensile strength (TS), compression pressure (CP), elastic modulus (E), and dynamic hardness (Hd) were determined along with Hiestand indices using compacts prepared at a solid fraction of ∼0.85. HPMCAS and copovidone exhibited lower Hd, lower CP, and lower E than the reference excipients and moderate TS. HPMCAS was found to be highly brittle based on brittle fracture index values. The CP was 24% and 61% higher for HPMCAS after SD and HME, respectively, than for unprocessed material along with a higher Hd. Furthermore, the TS of HPMCAS and copovidone decreased upon HME. Upon blending melt-extruded HPMCAS with plastic materials such as microcrystalline cellulose, the TS increased. These results suggest that SD and HME could impact reworkability by reducing deformation of materials and in case of HME, likely by increasing density due to heating and shear stress in a screw extruder. A somewhat similar effect was observed for the dynamic binding index (BId) of the excipients and formulated blends. Such data can be used to quantitate the impact of processing on mechanical properties of materials during tablet formulation development.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Lipoprotein(a) Lp(a) is a source of residual risk in patients with atherosclerotic cardiovascular disease (ASCVD). Clinical trials of fully human monoclonal antibodies targeting proprotein convertase ...subtilisin kexin 9 have shown that reductions in Lp(a) concentrations may be a predictor of event reduction with this class of cholesterol-lowering therapy. With the advent of selective therapies targeting Lp(a) such as antisense oligonucleotides, small-interfering RNA-based therapies, and gene editing, lowering of Lp(a) may lead to reduction in ASCVD. The phase 3 Lp(a)HORIZON (Assessing the Impact of Lipoprotein(a) Lowering with TQJ230 on Major Cardiovascular Events in Patients With CVD) outcomes trial is currently testing the effect of pelacarsen, an antisense oligonucleotide, on ASCVD risk. Olpasiran is a small-interfering RNA that is in a phase 3 clinical trial. As these therapies enter clinical trials, challenges in trial design will have to be addressed to optimize patient selection and outcomes.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Severe hypertriglyceridemia (sHTG), defined as a triglyceride (TG) concentration ≥ 500 mg/dL (≥ 5.7 mmol/L) is an important risk factor for acute pancreatitis. Although lifestyle, some medications, ...and certain conditions such as diabetes may lead to HTG, sHTG results from a combination of major and minor genetic defects in proteins that regulate TG lipolysis. Familial chylomicronemia syndrome (FCS) is a rare disorder caused by complete loss of function in lipoprotein lipase (LPL) or LPL activating proteins due to two homozygous recessive traits or compound heterozygous traits. Multifactorial chylomicronemia syndrome (MCS) and sHTG are due to the accumulation of rare heterozygous variants and polygenic defects that predispose individuals to sHTG phenotypes. Until recently, treatment of sHTG focused on lifestyle interventions, control of secondary factors, and nonselective pharmacotherapies that had modest TG-lowering efficacy and no corresponding reductions in atherosclerotic cardiovascular disease events. Genetic discoveries have allowed for the development of novel pathway-specific therapeutics targeting LPL modulating proteins. New targets directed towards inhibition of apolipoprotein C-III (apoC-III), angiopoietin-like protein 3 (ANGPTL3), angiopoietin-like protein 4 (ANGPTL4), and fibroblast growth factor-21 (FGF21) offer far more efficacy in treating the various phenotypes of sHTG and opportunities to reduce the risk of acute pancreatitis and atherosclerotic cardiovascular disease events.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
PDF
