Nanoemulsions are particularly suitable as a platform in the development of delivery systems for lipophilic functional agents. This study shows that transparent orange oil nanoemulsions can be ...fabricated using an isothermal low-energy method (spontaneous emulsification), which offers the advantage of fabricating flavor oil delivery systems using rapid and simple processing operations. Orange oil nanoemulsions were formed spontaneously by titration of a mixture of orange oil, carrier oil medium-chain triglyceride (MCT), and non-ionic surfactant (Tween) into an aqueous solution (5 mM citrate buffer at pH 3.5) with continuous stirring. The oil/emulsion ratio content was kept constant (10 wt %), while the surfactant/emulsion ratio (SER) was varied (2.5–20 wt %). Oil-phase composition (orange oil/MCT ratio), SER, and surfactant type all had an appreciable effect on nanoemulsion formation and stability. Transparent nanoemulsions could be formed under certain conditions: 20% surfactant (Tween 40, 60, or 80) and 10% oil phase (4–6% orange oil + 6–4% MCT). Surfactant type and oil-phase composition also affected the thermal stability of the nanoemulsions. Most of the nanoemulsions broke down after thermal cycling (from 20 to 90 °C and back to 20 °C); however, one system remained transparent after thermal cycling: 20% Tween 80, 5% orange oil, and 5% MCT. The mean droplet size of these nanoemulsions increased over time, but the droplet growth rate was reduced appreciably after dilution. These results have important implications for the design and utilization of nanoemulsions as delivery systems in the food and other industries.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM, UPUK
The food industry has used emulsion science and technology for many years to create a diverse range of food products, such as milk, cream, soft drinks, nutritional beverages, dressings, mayonnaise, ...sauces, dips, deserts, ice cream, margarine, and butter. The majority of these food products are conventional oil-in-water (O/W) or water-in-oil (W/O) type emulsions. Recently, there has been increasing interest within the food industry in either improving or extending the functional performance of foods using novel structured emulsions. This article reviews recent developments in the creation of structured emulsions that could be used by the food and other industries, including nanoemulsions, multiple emulsions, multilayer emulsions, solid lipid particles, and filled hydrogel particles. These structured emulsions can be produced from food-grade generally recognized as safe (GRAS) ingredients (e.g., lipids, proteins, polysaccharides, surfactants, and minerals), using simple processing operations (e.g., mixing, homogenizing, and thermal processing). The structure, production, performance, and potential applications of each type of structured emulsion system are discussed.
Tailor-made microparticles and nanoparticles are finding increasing use in food products to alter their nutritional characteristics, flavor profile, appearance, rheology, stability, and ...processability. These particles are often fabricated from food-grade biopolymers, such as proteins and polysaccharides. Food biopolymers display a diverse range of molecular and physicochemical properties (e.g. molecular weight, charge, branching, flexibility, polarity, and solubility) which enables the assembly of colloidal particles that exhibit a broad range of functional attributes. By careful selection of appropriate biopolymers and assembly methods, biopolymer particles can be fabricated with tailored behaviors or features. In this article, we review recent developments in the design and fabrication of functional biopolymer nanoparticles and microparticles, and highlight some of the challenges that will be the focus of future research.
Display omitted
•Micro- and nanoparticles find increasing application in the food science field.•Particles can be used to optimize nutritional properties, flavor, appearance and processability of food products.•Different biopolymers such as proteins and polysaccharides can be used to produce food-grade micro- and nano-particles.•Particle characteristics determine the functionality and stability of the particles in a food matrix.•Future research on particle design should be directed to the development of quantitative structure–function relationships.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
This study aimed to establish conditions where stable microemulsions, nanoemulsions or emulsions could be fabricated from a nonionic surfactant (Tween 80) and flavor oil (lemon oil). Different ...colloidal dispersions could be formed by simple heat treatment (90 °C, 30 min) depending on the surfactant-to-oil ratio (SOR): emulsions (r > 100 nm) at SOR < 1; nanoemulsions (r < 100 nm) at 1 < SOR < 2; microemulsions (r < 10 nm) at SOR > 2. Turbidity, electrical conductivity, shear rheology, and DSC measurements suggested there was a kinetic energy barrier in the oil−water−surfactant systems at ambient temperature that prevented them from forming metastable emulsion/nanoemulsion or thermodynamically stable microemulsion systems. High energy homogenization (high pressure or ultrasonic homogenizer) or low energy homogenization (heating) could be used to form emulsions or nanoemulsions at low or intermediate SOR values; whereas only heating was necessary to form stable microemulsions at high SOR values.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM, UPUK
Developing a mechanistic understanding of the impact of food structure and composition on human health has increasingly involved simulating digestion in the upper gastrointestinal tract. These ...simulations have used a wide range of different conditions that often have very little physiological relevance, and this impedes the meaningful comparison of results. The standardized protocol presented here is based on an international consensus developed by the COST INFOGEST network. The method is designed to be used with standard laboratory equipment and requires limited experience to encourage a wide range of researchers to adopt it. It is a static digestion method that uses constant ratios of meal to digestive fluids and a constant pH for each step of digestion. This makes the method simple to use but not suitable for simulating digestion kinetics. Using this method, food samples are subjected to sequential oral, gastric and intestinal digestion while parameters such as electrolytes, enzymes, bile, dilution, pH and time of digestion are based on available physiological data. This amended and improved digestion method (INFOGEST 2.0) avoids challenges associated with the original method, such as the inclusion of the oral phase and the use of gastric lipase. The method can be used to assess the endpoints resulting from digestion of foods by analyzing the digestion products (e.g., peptides/amino acids, fatty acids, simple sugars) and evaluating the release of micronutrients from the food matrix. The whole protocol can be completed in ~7 d, including ~5 d required for the determination of enzyme activities.
Consumer concern about human and environmental health is encouraging food manufacturers to use more natural and sustainable food ingredients. In particular, there is interest in replacing synthetic ...ingredients with natural ones, and in replacing animal-based ingredients with plant-based ones. This article provides a review of the various types of natural emulsifiers with potential application in the food industry, including phospholipids, biosurfactants, proteins, polysaccharides, and natural colloidal particles. Increased utilization of natural emulsifiers in food products may lead to a healthier and more sustainable food supply. However, more research is needed to identify, isolate, and characterize new sources of commercially viable natural emulsifiers suitable for food use.
Thyme oil-in-water nanoemulsions (pH 3.5) were prepared as potential antimicrobial delivery systems. The nanoemulsions were highly unstable to droplet growth and phase separation, which was ...attributed to Ostwald ripening due to the relatively high water solubility of thyme oil. Ostwald ripening could be inhibited by mixing thyme oil with a water-insoluble ripening inhibitor (≥60 wt % corn oil or ≥50 wt % MCT in the lipid phase) before homogenization, yielding nanoemulsions with good physical stability. Physically stable thyme oil nanoemulsions were examined for their antimicrobial activities against an acid-resistant spoilage yeast, Zygosaccharomyces bailii (ZB). Oil phase composition (ripening inhibitor type and concentration) had an appreciable influence on the antimicrobial activity of the thyme oil nanoemulsions. In general, increasing the ripening inhibitor levels in the lipid phase reduced the antimicrobial efficacy of nanoemulsions. For example, for nanoemulsions containing 60 wt % corn oil in the lipid phase, the minimum inhibitory concentration (MIC) of thyme oil to inhibit ZB growth was 375 μg/mL, while for nanoemulsions containing 90 wt % corn oil in the lipid phase, even 6000 μg/mL thyme oil could not inhibit ZB growth. This effect is also dependent on ripening inhibitor types: at the same concentration in the lipid phase, MCT decreased the antimicrobial efficacy of thyme oil more than corn oil. For instance, when the level of ripening inhibitor in the lipid phase was 70 wt %, the MICs of thyme oil for nanoemulsions containing corn oil and MCT were 750 and 3000 μg/mL, respectively. The results of this study have important implications for the design and utilization of nanoemulsions as antimicrobial delivery systems in the food and other industries.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM, UPUK
There is considerable interest in the production of emulsions and nanoemulsions using low‐energy methods due to the fact they are simple to implement and no expensive equipment is required. In this ...review, the principles of isothermal (spontaneous emulsification and emulsion phase inversion) and thermal (phase inversion temperature) low‐energy methods for nanoemulsion production are presented. The major factors influencing nanoemulsion formation using low‐energy methods and food‐grade components are reviewed: preparation conditions, oil type, surfactant type, surfactant‐to‐oil ratio, and cosolvent or cosurfactant addition. The advantages and disadvantages of different low‐energy and high‐energy methods for fabricating nanoemulsions are highlighted, and potential applications for these techniques are discussed.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Display omitted
► Vitamin E can be encapsulated in nanoemulsion using spontaneous emulsification. ► Oil composition has a major impact on the size of the droplets. ► Surfactant type have an ...appreciable impact on particle size. ► Optimum surfactant-to-oil ratio lead to produce fine droplets. ► Mixing temperature and stirring speed have reducing impacts on particle size.
Oil-in-water nanoemulsions are finding increasing use as delivery systems to encapsulate lipophilic bioactive components in functional food, personal care, and pharmaceutical products. We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by spontaneous emulsification. This method relies on the formation of very fine oil droplets when an oil/surfactant mixture is added to water. The oil-to-emulsion ratio content was kept constant (10wt.%) while the surfactant-to-emulsion ratio (%SER) was varied (from 2.5 to 10wt.%). Oil phase composition (vitamin E to medium chain triglyceride ratio) had a major effect on particle size, with the smallest droplets being formed at 8wt.% VE and 2wt.% MCT. Surfactant type also had an appreciable impact on particle size, with TWEEN® 80 giving the smallest droplets from a group of food-grade non-ionic surfactants (TWEEN® 20, 40, 60, 80, and 85). Surfactant-to-emulsion ratio also had to be optimized to produce fine droplets, with the smallest droplets being formed at SER=10wt.%. Particle size could also be reduced by increasing the temperature and stirring speed used when the oil/surfactant mixture was added to water. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d<50nm) and low polydispersity indexes (PDI<0.13). The spontaneous emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
There are many examples of bioactive proteins and peptides that would benefit from oral delivery through functional foods, supplements, or medical foods, including hormones, enzymes, antimicrobials, ...vaccines, and ACE inhibitors. However, many of these bioactive proteins are highly susceptible to denaturation, aggregation or hydrolysis within commercial products or inside the human gastrointestinal tract (GIT). Moreover, many bioactive proteins have poor absorption characteristics within the GIT. Colloidal systems, which contain nanoparticles or microparticles, can be designed to encapsulate, retain, protect, and deliver bioactive proteins. For instance, a bioactive protein may have to remain encapsulated and stable during storage and passage through the mouth and stomach, but then be released within the small intestine where it can be absorbed. This article reviews the application of food-grade colloidal systems for oral delivery of bioactive proteins, including microemulsions, emulsions, nanoemulsions, solid lipid nanoparticles, multiple emulsions, liposomes, and microgels. It also provides a critical assessment of the characteristics of colloidal particles that impact the effectiveness of protein delivery systems, such as particle composition, size, permeability, interfacial properties, and stability. This information should be useful for the rational design of medical foods, functional foods, and supplements for effective oral delivery of bioactive proteins.
Display omitted
•Protein and peptide bioactivity is often limited by their degradation or poor absorption.•Colloidal delivery systems (CDS) can be used to encapsulate bioactive proteins.•CDS may improve protein solubility, stability, and absorption characteristics.•Food-grade CDS can deliver hormones, enzymes, antimicrobials, & vaccines orally.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
PDF
