The aim of this study was to assess the effect of a unilateral anterior cruciate ligament reconstruction (ACLR) on maximum voluntary contraction (MVC) and explosive strength of both the involved limb ...and the uninvolved limb. Nineteen male athletes completed a standard isometric testing protocol 4 months post-ACLR, while 16 healthy participants served as a control group (CG). The explosive strength of the knee extensors and flexors was assessed as RFD obtained from the slope of the force-time curves over various time intervals. Both muscle groups of the involved limb had significantly lower MVC compared to the uninvolved. The involved limb also had significantly lower RFD in the late phase of contraction (140-250 ms) for both knee extensors and flexors (P < 0.05). There was no difference in MVC between the uninvolved limb and the CG. However, RFD of the uninvolved limb was lower compared to CG for both knee extensors (0-180 ms; P < 0.01) and flexors (0-150 ms; P < 0.05). ACLR leads to lower MVC and explosive strength of the involved limb. As a consequence of potential crossover (presumably neural-mediated) effects, explosive strength deficits could be bilateral, particularly in the early phase of the contraction (<100 ms).
Full text
Available for:
BFBNIB, FSPLJ, GIS, IJS, KISLJ, NUK, PNG, UL, UM, UPUK
Rapid force generation across submaximal levels has been evaluated with the rate of force development scaling factor (RFD-SF) in different isometric tasks, while such measurement was still not ...verified in dynamic tasks. Our study was designed to evaluate the feasibility of the RFD-SF in dynamic drop jump (DJ) task (RFD-SFDJ). A total of 55 young athletes performed isometric plantarflexion at different submaximal intensities and 60 DJs (6 different drop heights). For each participant we calculated linearity (r2) and slope in isometric task (RFD-SFPF), eccentric part of DJ (RFD-SFDJ-ECC) and concentric part of DJ (RFD-SFDJ-CON), as well as average jump height (DJH) from each drop height. Our results revealed strong linear force-RFD relationship for isometric plantarflexion (r2 = 0.90 ± 0.06), eccentric (r2 = 0.87 ± 0.09) and concentric phase of DJ (r2 = 0.80 ± 0.18). Significant moderate positive correlations were calculated between RFD-SFPF and RFD-SFDJ-ECC (r = 0.311, p < 0.05) and small negative correlations between RFD-SFDJ-CON and RFD-SF (r = -0.276, p < 0.05). Significant positive moderate correlations were seen only between RFD-SFDJ-ECC and DJH from 10 cm (r = 0.459, p < 0.001) and 15 cm (r = 0.423, p < 0.01). This is the first study to introduce and confirm that RFD-SFDJ can be obtained from the multi-joint tasks (60 jumps) and still provide acceptable reliability and linear relationship. Furthermore, RFD-SFDJ may have greater practical application than RFD-SF assessed under the isometric conditions. This verification of RFD-SFDJ opens opportunities for further research regarding its practical application.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Over the past decade, force-velocity (F-v) profiling has emerged as a promising tool for assessing neuromuscular capacity to design individually tailored interventions in diverse populations. To ...date, a limited number of studies have addressed the optimization of the linear method for measuring F-v profiles of single-joint isokinetic movements. We aimed to simplify the measurement of knee extension (KE) and knee flexion (KF) isokinetic tasks by evaluating the most appropriate combination of two velocities (i.e., the 2-point method). Twenty-two healthy participants (11 males and 11 females) were included in the study. Isokinetic peak torque was measured at nine angular velocities (30-60-90-120-150-180-210-240-300°/s) and under isometric conditions (at 150° and 120° of KF for KE, and KF, respectively). Maximal theoretical force (F
0
), maximal theoretical velocity (v
0
), slope of the relationship (S
fv
) and maximal theoretical power (P
max
) were derived from the linear F-v profiles of KE and KF and compared between the 9-point method and all possible combinations (36 in total) of the 2-point methods. The F-v profiles obtained from nine points were linear for KE (R2 = 0.95; 95% CI = 0.94–0.96) and KF (R2 = 0.93; 95% CI = 0.90–0.95), with F
0
underestimating isometric force. Further analyses revealed great to excellent validity (range: ICCs = 0.89–0.99; CV = 2.54%–4.34%) and trivial systematic error (range: ES = −0.11–0.24) of the KE 2-point method when force from distant velocities (30°/s, 60°/s or 90°/s combined with 210°/s, 240°/s or 300°/s) was used. Similarly, great to excellent validity and trivial systematic error of the KF 2-point method for F0 and Pmax (range: ICC = 0.90–0.96; CV = 2.94%–6.38%; ES = −0.07–0.14) were observed when using the previously described combinations of velocities. These results suggest that practitioners should consider using more distant velocities when performing simplified isokinetic 2-point single-joint F-v profiling. Furthermore, the F-v profile has the potential to differentiate between the mechanical properties of knee extensors and flexors and could therefore serve as a potential descriptor of performance.
Single outcomes of standard isokinetic dynamometry tests do not discern between various muscle mechanical capacities. In this study, we aimed to (1) evaluate the shape and strength of the ...force-velocity relationship of knee extensors, as observed in isokinetic tests conducted at a wide range of angular velocities, and (2) explore the concurrent validity of a simple 2-velocity method. Thirteen physically active females were tested for both the peak and averaged knee extensor concentric force exerted at the angular velocities of 30°-240°/s recorded in the 90°-170° range of knee extension. The results revealed strong (0.960<R<0.998) linear force-velocity relationships that depict the maximum muscle force (i.e. the force-intercept), velocity (velocity-intercept), and power (their product). Moreover, the line drawn through only the 60° and 180°/s data (the '2-velocity method') revealed a high level of agreement with the force-velocity relationship obtained (0.76<R<0.97; all power<0.001); while the force-intercept highly correlated (0.68<R<0.84; all power≤0.01) with the directly measured isometric force. The 2-velocity method could therefore be developed into a standard method for isokinetic testing of mechanical capacities of knee extensors and, if supported by further research, other muscles. This brief and fatigue-free testing procedure could discern between muscle force, velocity, and power-producing capacities.
The purpose of the present study was (i) to explore the reliability of the most commonly used countermovement jump (CMJ) metrics, and (ii) to reduce a large pool of metrics with acceptable levels of ...reliability via principal component analysis to the significant factors capable of providing distinctive aspects of CMJ performance. Seventy-nine physically active participants (thirty-seven females and forty-two males) performed three maximal CMJs while standing on a force platform. Each participant visited the laboratory on two occasions, separated by 24-48 h. The most reliable variables were performance variables (CV = 4.2-11.1%), followed by kinetic variables (CV = 1.6-93.4%), and finally kinematic variables (CV = 1.9-37.4%). From the 45 CMJ computed metrics, only 24 demonstrated acceptable levels of reliability (CV ≤ 10%). These variables were included in the principal component analysis and loaded a total of four factors, explaining 91% of the CMJ variance: performance component (variables responsible for overall jump performance), eccentric component (variables related to the breaking phase), concentric component (variables related to the upward phase), and jump strategy component (variables influencing the jumping style). Overall, the findings revealed important implications for sports scientists and practitioners regarding the CMJ-derived metrics that should be considered to gain a comprehensive insight into the biomechanical parameters related to CMJ performance.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
•We tested the maximum countermovement and squat jumps.•We related the jump performance with the associated muscle power output.•Both body size and countermovement depth confound the studied ...relationship.•The peak, rather than average power, should be related with jumping performance.•Use of the countermovement jump for power testing is recommended.
A number of studies based on maximum vertical jumps have presumed that the maximum jump height reveals the maximum power of lower limb muscles, as well as the tested muscle power output predicts the jumping performance. The objective of the study was to test the hypothesis that both the body size and countermovement depth confound the relationship between the muscle power output and performance of maximum vertical jumps. Sixty young and physically active males were tested on the maximum countermovement (CMJ) and squat jumps (SJ). The jumping performance (Hmax), peak (Ppeak) and the average power output (Pavg) during the concentric phase, countermovement depth (only in CMJ) and body mass as an index of body size were assessed. To assess the power-performance relationship, the correlations between Hmax with both Ppeak and Pavg were calculated without and with controlling for the effects of body mass, as well as for the countermovement depth. The results revealed moderate power-performance relationships (range .55<r<.64) that were comparable for CMJ and SJ jumps. When controlled for body mass, the same values were markedly higher (.61<r<.82; p<.05 for Ppeak of both jumps). When controlled for both the body mass and countermovement depth, CMJ revealed r=.88 and r=.77 for Ppeak and Pavg, respectively. Both jumps revealed stronger relationships with Ppeak than with Pavg (p<.05) when controlled for either body mass or both body mass and countermovement depth. We conclude that both body size (in CMJ and SJ) and countermovement depth (in CMJ) confound the relationship between the muscle power output with the performance of maximum vertical jumps. Regarding routine assessments of muscle power from jumping performance and vice versa, the use of CMJ is recommended, while Ppeak, rather than Pavg, should be the variable of choice.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
This study aimed to (1) evaluate the shape of the force-velocity (F-V) relationship obtained from different muscles, (2) explore the concurrent validity of the two-point method with respect to the ...multiple-point method, (3) evaluate whether the F-V relationship can discriminate between muscle groups and genders, and (4) explore the generalisability of the same F-V relationship parameters (maximal force F
0
, maximal velocity V
0
), and maximal power P
0
) between different tasks. The F-V relationship of 22 physically active participants (12 women) were tested during knee extension, knee flexion, elbow extension and elbow flexion through the multiple- (eight velocities: 30-60-90-120-150-180-210-240º/s) and two-point (two velocities: 60-180º/s) methods. The findings revealed (1) highly linear F-V relationships (r ≥ 0.893), (2) high concurrent validity of the two-point method for F
0
, but lower for V
0
and P
0
, (3) the outcomes of both methods were sensitive to the muscle groups (higher for knee muscles) and gender (higher for men), and (4) the magnitude of the same F-V parameters were poorly correlated between different tasks (median r < 0.1). These results support the two-point method as a valid and sensitive procedure for determining the maximal capacities of the muscles to produce F, but not V, during isokinetic tests.
Full text
Available for:
BFBNIB, FSPLJ, GIS, IJS, KISLJ, NUK, PNG, UL, UM, UPUK
Isokinetic testing has been routinely used to assess the capacities of individual muscle groups. In this study we aimed to evaluate the sensitivity of the force-point (F-v) relationship assessed ...through the two-point method to discriminate between antagonist muscle groups and males with different physical activity levels.
The concentric force output of the knee, hip, elbow, and shoulder flexors and extensors of 27 active and 13 non-active men was recorded at 60 and 180°/s to determine the F-v relationship parameters (maximum force
, maximum velocity
, and maximum power P
).
and P
were higher for knee extensors (effect size ES = 1.97 and 0.57, respectively), hip extensors (ES = 2.52 and 0.77, respectively), and shoulder flexors (ES = 1.67 and 0.83, respectively) compared to their antagonist muscles, while
was higher for knee flexors compared to knee extensors (ES = 0.59). Active males revealed higher
for knee extensors (ES = 0.72) and knee flexors (ES = 0.83) and higher P
for knee flexors (ES = 0.70), elbow extensors (ES = 0.83) and shoulder extensors (ES = 0.36).
The sensitivity of the two-point method for testing the maximal mechanical capacities was high for the knee, moderate for the hip and shoulder, and low for the elbow joint.
The aim of this study was to investigate the resistance-specific gains in muscle power and strength (1RM) following the training of maximum bench-press throws (BPT) against constant, inertial, and ...combined resistance. Forty-eight male participants (age 20.5 ± 2.0 years) were randomly assigned to the constant, inertial, combined resistance, or control group. Participants underwent 8 weeks of training of BPT against the loads that corresponded to the different effects of mass of 40 kg (∼50% of 1RM). The gains in average and maximum power, and 1RM were significant in all experimental groups (
< 0.01), but not in the control group (
> 0.1). Relative gains in the average (26.3 ± 9.8%) and maximum power (25.2 ± 9.8%) were larger than that in the 1RM (mean 7.2 ± 6.9%; both
< 0.001). The gains in the average (
= 6.0;
< 0.01) and maximum power (
= 4.7;
< 0.01) were higher when tested against the training-specific resistance than when tested against the remaining two resistance types. Differences in 1RM among experimental groups were not significant (
= 0.092). The most important and rather novel finding of the study is that the training against the weight and inertial resistance, and their combination results in resistance-specific gains in muscle power, although the overall gains muscle strength and power remain comparable across the training protocols.
Abstract
Cabarkapa, D, Cabarkapa, DV, Philipp, NM, Knezevic, OM, Mirkov, DM, and Fry, AC. Pre-post practice changes in countermovement vertical jump force-time metrics in professional male basketball ...players.
J Strength Cond Res
37(11): e609–e612, 2023—Despite the countermovement vertical jump (CVJ) being one of the most popular noninvasive and time-efficient methods for monitoring neuromuscular status, there is a lack of scientific literature focused on examining fatigue-induced alterations in performance in elite athletes. Thus, the purpose of this study was to examine changes in force-time metrics pre-post practice in professional male basketball players. Seventeen athletes competing in first-tier and second-tier national basketball leagues in Europe participated in this study. While standing on a uniaxial force plate sampling at 1,000 Hz, each athlete completed 3 CVJs pre-practice and post-practice. The practice consisted of individual and team shooting drills, position-specific player development drills, 5-on-0 offensive actions, and 5-on-5 play, including full-court transition (∼2 hours). The findings reveal that pre-post practice changes in force-time metrics seem to be phase specific. Despite a trivial increase in eccentric mean force (920.4 ± 100.2, 929.4 ± 100.0 N), most changes were observed within the concentric phase of the CVJ. The concentric phase duration increased pre-post practice (0.233 ± 0.027, 0.242 ± 0.033 seconds), whereas concentric impulse (262.9 ± 18.8, 258.6 ± 21.6 N·s), peak velocity (2.93 ± 0.22, 2.86 ± 0.22 m·s
−1
), mean force (2052.4 ± 179.2, 2002.7 ± 188.2 N), mean power (3,165.5 ± 269.5, 3,030.9 ± 326.8 W), and peak power (5,523.4 ± 607.3, 5,246.6 ± 663.7 W) experienced a significant decrease. Moreover, alongside longer contraction time (0.663 ± 0.065, 0.686 ± 0.074 seconds), lower vertical jump height (41.0 ± 6.8, 38.9 ± 6.6 cm) and reactive strength index-modified (0.634 ± 0.113, 0.579 ± 0.111 m·s
−1
) values were observed post-practice. Overall, these findings may allow practitioners to detect fatigue-induced changes in CVJ force-time metrics in professional male basketball players that can ultimately improve the acute and longitudinal training-adaptation monitoring process.
PDF
