The largest gene cluster of human microRNAs (miRNAs), the chromosome 19 miRNA cluster (C19MC), is exclusively expressed in the placenta and in undifferentiated cells. The precise expression pattern ...and function of C19MC members are unknown. We sought to profile the relative expression of C19MC miRNAs in primary human trophoblast (PHT) cells and exosomes. Using high-throughput profiling, confirmed by PCR, we found that C19MC miRNAs are among the most abundant miRNAs in term human trophoblasts. Hypoxic stress selectively reduced miR-520c-3p expression at certain time-points with no effect on other C19MC miRNAs. Similarly, differentiation in vitro had a negligible effect on C19MC miRNAs. We found that C19MC miRNAs are the predominant miRNA species expressed in exosomes released from PHT, resembling the profile of trophoblastic cellular miRNA. Predictably, we detected the similar levels of circulating C19MC miRNAs in the serum of healthy pregnant women at term and in women with pregnancies complicated by fetal growth restriction. Our data define the relative expression levels of C19MC miRNAs in trophoblasts and exosomes, and suggest that C19MC miRNAs function in placental-maternal signaling.
Placental trophoblasts form the interface between the fetal and maternal environments and serve to limit the maternal–fetal spread of viruses. Here we show that cultured primary human placental ...trophoblasts are highly resistant to infection by a number of viruses and, importantly, confer this resistance to nonplacental recipient cells by exosome-mediated delivery of specific microRNAs (miRNAs). We show that miRNA members of the chromosome 19 miRNA cluster, which are almost exclusively expressed in the human placenta, are packaged within trophoblast-derived exosomes and attenuate viral replication in recipient cells by the induction of autophagy. Together, our findings identify an unprecedented paracrine and/or systemic function of placental trophoblasts that uses exosome-mediated transfer of a unique set of placental-specific effector miRNAs to directly communicate with placental or maternal target cells and regulate their immunity to viral infections.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK
Dendritic cells (DCs) are the most potent APCs. Whereas immature DCs down-regulate T-cell responses to induce/maintain immunologic tolerance, mature DCs promote immunity. To amplify their functions, ...DCs communicate with neighboring DCs through soluble mediators, cell-to-cell contact, and vesicle exchange. Transfer of nanovesicles (< 100 nm) derived from the endocytic pathway (termed exosomes) represents a novel mechanism of DC-to-DC communication. The facts that exosomes contain exosome-shuttle miRNAs and DC functions can be regulated by exogenous miRNAs, suggest that DC-to-DC interactions could be mediated through exosome-shuttle miRNAs, a hypothesis that remains to be tested. Importantly, the mechanism of transfer of exosome-shuttle miRNAs from the exosome lumen to the cytosol of target cells is unknown. Here, we demonstrate that DCs release exosomes with different miRNAs depending on the maturation of the DCs. By visualizing spontaneous transfer of exosomes between DCs, we demonstrate that exosomes fused with the target DCs, the latter followed by release of the exosome content into the DC cytosol. Importantly, exosome-shuttle miRNAs are functional, because they repress target mRNAs of acceptor DCs. Our findings unveil a mechanism of transfer of exosome-shuttle miRNAs between DCs and its role as a means of communication and posttranscriptional regulation between DCs.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Arginine methyltransferases critically regulate cellular homeostasis by modulating the functional outcome of their substrates. The protein arginine methyltransferase 5 (PRMT5) is an enzyme involved ...in growth and survival pathways promoting tumorigenesis. However, little is known about the biologic function of PRMT5 and its therapeutic potential in multiple myeloma (MM). In the present study, we identified and validated PRMT5 as a new therapeutic target in MM. PRMT5 is overexpressed in patient MM cells and associated with decreased progression-free survival and overall survival. Either genetic knockdown or pharmacological inhibition of PRMT5 with the inhibitor EPZ015666 significantly inhibited growth of both cell lines and patient MM cells. Furthermore, PRMT5 inhibition abrogated NF-κB signaling. Interestingly, mass spectrometry identified a tripartite motif-containing protein 21 TRIM21 as a new PRMT5-partner, and we delineated a TRIM21-dependent mechanism of NF-κB inhibition. Importantly, oral administration of EPZ015666 significantly decreased MM growth in a humanized murine model of MM. These data both demonstrate the oncogenic role and prognostic relevance of PRMT5 in MM pathogenesis, and provide the rationale for novel therapies targeting PRMT5 to improve patient outcome.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Three-dimensional printing of hard materials Carreño-Morelli, E.; Alveen, P.; Moseley, S. ...
International journal of refractory metals & hard materials,
February 2020, 2020-02-00, 20200201, Volume:
87
Journal Article
Peer reviewed
Tungsten cemented carbide parts have been produced by the “Solvent on Granule” 3D-Printing technique. It consists in growing layer-by-layer a green part by spreading a powder-polymer granule bed, ...followed by selective solvent jetting, and layer consolidation after solvent evaporation. The granules are prepared by wet blending, drying, milling and sieving to appropriate size range. The printed green parts are consolidated by thermal debinding and liquid phase sintering.
Fully dense WC-Co test parts and a drill bit have been produced from presintered powder and elementary Co powder. The microstructures are equivalent to those of press and sintered parts. Good shape retention and tolerances are achieved.
•« Solvent on granule » 3D-printing is an effective Additive Manufacturing route to produce hard metal parts•Granules prepared from presintered WC-Co powder and additional elementary Co•3D-printed dense WC-17.7Co parts•3D-printed part microstructure equivalent to press and sintering microstructures•Complex 3D-printed drill bit shows good shape retention and porosity less than A04
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The main limitations to the success of transplantation are the antigraft response developed by the recipient immune system, and the adverse side effects of chronic immunosuppression. ...Graft‐versus‐host disease (GVHD) triggered by donor‐derived T lymphocytes against the recipient tissues is another serious obstacle in the field of hematopoietic stem cell transplantation. Several laboratories have tested the possibility of promoting antigen (Ag)‐specific tolerance for therapy of graft rejection, GVHD, and autoimmune disorders, by developing methodologies that mimic the mechanisms by which the immune system maintains peripheral tolerance in the steady state. It has been long recognized that the silent clearance of cells undergoing apoptosis exerts potent immune‐regulatory effects and provides apoptotic cell‐derived Ags to those Ag‐presenting cells (APCs) that internalize them, in particular macrophages and dendritic cells. Therefore, in situ‐targeting of recipient APCs by systemic administration of leukocytes in early apoptosis and bearing donor Ags represents a relatively simple approach to control the antidonor response against allografts. Here, we review the mechanisms by which apoptotic cells are silently cleared by phagocytes, and how such phenomenon leads to down‐regulation of the innate and adaptive immunity. We discuss the evolution of apoptotic cell‐based therapies from murine models of organ/tissue transplantation and GVHD, to clinical trials. We make emphasis on potential limitations and areas of concern of apoptotic cell‐based therapies, and on how other immune‐suppressive therapies used in the clinics or tested experimentally likely also function through the silent clearance of apoptotic cells by the immune system. Stem Cells 2016;34:1142–1150
Interferon regulatory factor 4 (IRF4) is an attractive therapeutic target in multiple myeloma (MM). We here report that expression of IRF4 mRNA inversely correlates with microRNA (miR)-125b in MM ...patients. Moreover, we provide evidence that miR-125b is downregulated in TC2/3 molecular MM subgroups and in established cell lines. Importantly, constitutive expression of miR-125b-5p by lentiviral vectors or transfection with synthetic mimics impaired growth and survival of MM cells and overcame the protective role of bone marrow stromal cells in vitro. Apoptotic and autophagy-associated cell death were triggered in MM cells on miR-125b-5p ectopic expression. Importantly, we found that the anti-MM activity of miR-125b-5p was mediated via direct downregulation of IRF4 and its downstream effector BLIMP-1. Moreover, inhibition of IRF4 translated into downregulation of c-Myc, caspase-10 and cFlip, relevant IRF4-downstream effectors. Finally, in vivo intra-tumor or systemic delivery of formulated miR-125b-5p mimics against human MM xenografts in severe combined immunodeficient/non-obese diabetic mice induced significant anti-tumor activity and prolonged survival. Taken together, our findings provide evidence that miR-125b, differently from other hematologic malignancies, has tumor-suppressor activity in MM. Furthermore, our data provide proof-of-concept that synthetic miR-125b-5p mimics are promising anti-MM agents to be validated in early clinical trials.
Full text
Available for:
DOBA, EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, IZUM, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UILJ, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Dendritic cells (DCs) are uniquely well‐equipped antigen‐presenting cells (APCs) regarded classically as sentinels of the immune response, which induce and regulate T‐cell reactivity. They play ...critical roles in central tolerance and in the maintenance of peripheral tolerance in the normal steady state. Following cell or organ transplantation, DCs present antigen to T cells via the direct or indirect pathways of allorecognition. These functions of DCs set in train the rejection response, but they also serve as potential targets for suppression of alloimmune reactivity and promotion of tolerance induction. Much evidence from various model systems now indicates that DCs can induce specific T‐cell tolerance. Although underlying mechanisms have not been fully elucidated, the capacity to induce T‐regulatory cells may be an important property of tolerogenic or regulatory DCs. Efforts to generate ‘designer’ DCs with tolerogenic properties in the laboratory using specific cytokines, immunologic or pharmacologic reagents, or genetic engineering approaches have already met with some success. Alternatively, targeting of DCs in vivo (e.g. by infusion of apoptotic allogeneic cells) to take advantage of their inherent tolerogenicity has also demonstrated exciting potential. The remarkable heterogeneity and plasticity of these important APCs present additional challenges to optimizing DC‐based therapies that may lead to improved tolerance‐enhancing strategies in the clinic.
Full text
Available for:
BFBNIB, DOBA, FZAB, GIS, IJS, IZUM, KILJ, NLZOH, NUK, OILJ, PILJ, PNG, SAZU, SBCE, SBMB, SIK, UILJ, UKNU, UL, UM, UPUK
Cemented carbide parts have been manufactured from WC-12Co granules by “Solvent on Granules 3D-Printing” and compared with reference parts produced by conventional press and sintering. SG-3DP ...consists in growing a green part layer-by-layer by selective solvent jetting on powder-polymer granule beds. Both 3D printed green parts and uniaxially pressed compacts have been consolidated by thermal debinding and liquid phase sintering. Further densification has been achieved by hot isostatic pressing.
3D-printed parts subjected to hot isostatic pressing exhibit 99.9% of theoretical density, 1308 ± 10 HV30 hardness and 12.1 ± 0.3 MPa∙m½ indentation toughness, which are comparable to properties of a commercial fine grained WC-12Co. Percussion drilling tests with fully dense SG-3DP drill plates have also been carried out successfully on concrete.
•Solvent on granules 3D-printing” (SG-3DP) is an effective Additive Manufacturing route to produce hard metal parts.•Fully dense WC-12Co parts successfully processed by SG-3DP technique followed by Hot isostatic pressing.•3D-printed part microstructure equivalent to press and sintering microstructures.•3D-printed drill bits show good shape retention and B04 porosity.•Functional parts processed and successful percussion drilling tests performed.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Extracellular vesicles, including exosomes, are small membrane vesicles derived from multivesicular bodies or from the plasma membrane. Most, if not all, cell types release extracellular vesicles, ...which then enter the bodily fluids. These vesicles contain a subset of proteins, lipids and nucleic acids that are derived from the parent cell. It is thought that extracellular vesicles have important roles in intercellular communication, both locally and systemically, as they transfer their contents, including proteins, lipids and RNAs, between cells. Extracellular vesicles are involved in numerous physiological processes, and vesicles from both non-immune and immune cells have important roles in immune regulation. Moreover, extracellular vesicle-based therapeutics are being developed and clinically tested for the treatment of inflammatory diseases, autoimmune disorders and cancer. Given the tremendous therapeutic potential of extracellular vesicles, this Review focuses on their role in modulating immune responses, as well as their potential therapeutic applications.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, UILJ, UKNU, UL, UM, UPUK
PDF
