This paper explores the possibility of distributing the fields of view (FOVs) of a centralized lidar cluster using fixed mirrors for future use in safety applications in robotics and elsewhere. A ...custom modular lidar system with time-over-threshold (TOT) walk error compensation was developed for the experiments. It comprises a control board that provides the processing power and adjustable voltage regulation, and multiple individually addressable analogue front end (AFE) boards that each contain a transmitter, a receiver, time-to-digital (TDC) converters for pulse width measurements on the bot Tx and Rx side, and adjustable reference voltage generators for both the Tx and Rx pulse detection threshold. The lidar system's performance with a target in the direct line of sight is compared to the configurations where the FOV is redirected with up to three mirrors in different configurations. The results show that the light path through the neighboring mirrors introduces a minor but noticeable measurement error on a portion of the measurement range.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
An ultra-wideband (UWB) localization system is an alternative in a GPS-denied environment. However, a distance measurement with UWB modules using a two-way communication protocol induces an ...orientation-dependent error. Previous research studied this error by looking at parameters such as the received power and the channel response signal. In this paper, the neural network (NN) method for correcting the orientation-induced distance error without the need to calculate the signal strength, obtain the channel response or know any parameters of the antenna and the UWB modules is presented. The NN method utilizes only the measured distance and the tag orientation, and implements an NN model obtained by machine learning, using measurements at different distances and orientations of the two UWB modules. The verification of the experimental setup with 12 anchors and a tag shows that with the proposed NN method, 5 cm better root mean square error values (RMSEs) are obtained for the measured distance between the anchors and the tag compared to the calibration method that did not include orientation information. With the least-square estimator, 14 cm RMSE in 3D is obtained with the NN model corrected distances, with a 9 cm improvement compared to when raw distances are used. The method produces better results without the need to obtain the UWB module's diagnostics parameters that are required to calculate the received signal strength or channel response, and in this way maintain the minimum packet size for the ranging protocol.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Wearable robotic devices require sensors and algorithms that can recognize the user state in real-time, in order to provide synergistic action with the body. For devices intended for ...locomotion-related applications, shoe-embedded sensors are a common and convenient choice, potentially advantageous for performing gait assessment in real-world environments. In this work, we present the development of a pair of pressure-sensitive insoles based on optoelectronic sensors for the real-time estimation of temporal gait parameters. The new design makes use of a simplified sensor configuration that preserves the time accuracy of gait event detection relative to previous prototypes. The system has been assessed relatively to a commercial force plate recording the vertical component of the ground reaction force (vGRF) and the coordinate of the center of pressure along the so-called progression or antero-posterior plane (CoP
) in ten healthy participants during ground-level walking at two speeds. The insoles showed overall median absolute errors (MAE) of 0.06 (0.02) s and 0.04 (0.02) s for heel-strike and toe-off recognition, respectively. Moreover, they enabled reasonably accurate estimations of the stance phase duration (2.02 (2.03) % error) and CoP
profiles (Pearson correlation coefficient with force platform ρCoP = 0.96 (0.02)), whereas the correlation with vGRF measured by the force plate was lower than that obtained with the previous prototype (ρvGRF = 0.47 (0.20)). These results confirm the suitability of the insoles for online sensing purposes such as timely gait phase estimation and discrete event recognition.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
This study uses inertial sensors to measure ski jumper kinematics and joint dynamics, which was until now only a part of simulation studies. For subsequent calculation of dynamics in the joints, a ...link-segment model was developed. The model relies on the recursive Newton-Euler inverse dynamics. This approach allowed the calculation of the ground reaction force at take-off. For the model validation, four ski jumpers from the National Nordic center performed a simulated jump in a laboratory environment on a force platform; in total, 20 jumps were recorded. The results fit well to the reference system, presenting small errors in the mean and standard deviation and small root-mean-square errors. The error is under 12% of the reference value. For field tests, six jumpers participated in the study; in total, 28 jumps were recorded. All of the measured forces and moments were within the range of prior simulated studies. The proposed system was able to indirectly provide the values of forces and moments in the joints of the ski-jumpers' body segments, as well as the ground reaction force during the in-run and take-off phases in comparison to the force platform installed on the table. Kinematics assessment and estimation of dynamics parameters can be applied to jumps from any ski jumping hill.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
► Survey of autonomic nervous system responses in physiological computing. ► For psychologists and computer scientists: primarily covers computational aspects. ► Prerequisites: training set, feature ...extraction, normalization, dimension reduction. ► Classification and estimation of psychological states from physiology. ► Adapt system that user is interacting with in response to psychological states.
Physiological computing represents a mode of human–computer interaction where the computer monitors, analyzes and responds to the user’s psychophysiological activity in real-time. Within the field, autonomic nervous system responses have been studied extensively since they can be measured quickly and unobtrusively. However, despite a vast body of literature available on the subject, there is still no universally accepted set of rules that would translate physiological data to psychological states. This paper surveys the work performed on data fusion and system adaptation using autonomic nervous system responses in psychophysiology and physiological computing during the last ten years. First, five prerequisites for data fusion are examined: psychological model selection, training set preparation, feature extraction, normalization and dimension reduction. Then, different methods for either classification or estimation of psychological states from the extracted features are presented and compared. Finally, implementations of system adaptation are reviewed: changing the system that the user is interacting with in response to cognitive or affective information inferred from autonomic nervous system responses. The paper is aimed primarily at psychologists and computer scientists who have already recorded autonomic nervous system responses and now need to create algorithms to determine the subject’s psychological state.
This study focuses on the feasibility of collaborative robot implementation in a medical microbiology laboratory by demonstrating fine tasks using kinesthetic teaching. Fine tasks require ...sub-millimetre positioning accuracy. Bacterial colony picking and identification was used as a case study. Colonies were picked from Petri dishes and identified using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry. We picked and identified 56 colonies (36 colonies of Gram-negative
and 20 colonies of Gram-positive
). The overall identification error rate was around 11%, although it was significantly lower for Gram-positive bacteria (5%) than Gram-negative bacteria (13.9%). Based on the identification scores, it was concluded that the system works similarly well as a manual operator. It was determined that tasks were successfully demonstrated using kinesthetic teaching and generalized using dynamic movement primitives (DMP). Further improvement of the identification error rate is possible by choosing a different deposited sample treatment method (e.g., semi-extraction, wet deposition).
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
This paper investigates the feasibility of redirecting the field of view (FOV) of a light-based time-of-flight (ToF) ranging device, commonly known as a pulsed lidar, using fixed mirrors and prisms ...for possible future use in robotics. The emphasis is on configurations where the FOV redirection element is positioned beyond the ranging device’s dead zone. A custom made direct ToF ranging device with time-over-threshold (TOT)-based walk error compensation was used to evaluate the effects of the FOV redirecting optics on range measurement accuracy and precision. The tests include redirecting the FOV with a clean prism with anti-reflective (AR) coating on its legs, as well as with a regular and a first surface mirror in both a clean and dusted state. The study finds the prism to be unsuitable due to parasitic reflections, which ruin the ranging data. The clean mirrors were found to have no noticeable effect on ranging accuracy. When they are dusty, mirrors introduce a negative measurement error. This effect is the most pronounced when a mirror is positioned toward the end of the partial dead zone of the ToF rangefinder, but loses influence as the mirror is moved farther away. The error is attributed to the parasitic reflection off dust on the mirror, which reduces the time of detection of the pulse reflected off the real target, and interferes with the walk error compensation by widening the detected pulse.
In patients after stroke, ability of the upper limb is commonly assessed with standardised clinical tests that provide a complete upper limb assessment. This paper presents quantification of upper ...limb movement during the execution of Action research arm test (ARAT) using a wearable system of inertial measurement units (IMU) for kinematic quantification and electromyography (EMG) sensors for muscle activity analysis. The test was executed with each arm by a group of healthy subjects and a group of patients after stroke allocated into subgroups based on their clinical scores. Tasks were segmented into movement and manipulation phases. Each movement phase was quantified with a set of five parameters: movement time, movement smoothness, hand trajectory similarity, trunk stability, and muscle activity for grasping. Parameters vary between subject groups, between tasks, and between task phases. Statistically significant differences were observed between patient groups that obtained different clinical scores, between healthy subjects and patients, and between the unaffected and the affected arm unless the affected arm shows normal performance. Movement quantification enables differentiation between different subject groups within movement phases as well as for the complete task. Spearman's rank correlation coefficient shows strong correlations between patient's ARAT scores and movement time as well as movement smoothness. Weak to moderate correlations were observed for parameters that describe hand trajectory similarity and trunk stability. Muscle activity correlates well with grasping activity and the level of grasping force in all groups.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Patients after stroke need to re-learn functional movements required for independent living throughout the rehabilitation process. In the study, we used a wearable sensory system for monitoring the ...movement of the upper limbs while performing activities of daily living. We implemented time-based and path-based segmentation of movement trajectories and muscle activity to quantify the activities of the unaffected and the affected upper limbs. While time-based segmentation splits the trajectory in quants of equal duration, path-based segmentation isolates completed movements. We analyzed the hand movement path and forearm muscle activity and introduced a bimanual movement parameter, which enables differentiation between unimanual and bimanual activities. The approach was validated in a study that included a healthy subject and seven patients after stroke with different levels of disabilities. Path-based segmentation provides a more detailed and comprehensive evaluation of upper limb activities, while time-based segmentation is more suitable for real-time assessment and providing feedback to patients. Bimanual movement parameter effectively differentiates between different levels of upper limb involvement and is a clear indicator of the activity of the affected limb relative to the unaffected limb.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Estimation of the centre of pressure (COP) is an important part of the gait analysis, for example, when evaluating the functional capacity of individuals affected by motor impairment. Inertial ...measurement units (IMUs) and force sensors are commonly used to measure gait characteristic of healthy and impaired subjects. We present a methodology for estimating the COP solely from raw gyroscope, accelerometer, and magnetometer data from IMUs using statistical modelling. We demonstrate the viability of the method using an example of two models: a linear model and a non-linear Long-Short-Term Memory (LSTM) neural network model. Models were trained on the COP ground truth data measured using an instrumented treadmill and achieved the average intra-subject root mean square (RMS) error between estimated and ground truth COP of 12.3 mm and the average inter-subject RMS error of 23.7 mm which is comparable or better than similar studies so far. We show that the calibration procedure in the instrumented treadmill can be as short as a couple of minutes without the decrease in our model performance. We also show that the magnetic component of the recorded IMU signal, which is most sensitive to environmental changes, can be safely dropped without a significant decrease in model performance. Finally, we show that the number of IMUs can be reduced to five without deterioration in the model performance.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
PDF
