Due to their simplicity and versatility of design, straight strip or rectangular pad anode structures are frequently used with micropattern gas detectors (MPGDs) to reconstruct high-precision space ...points for various tracking applications. The particle impact point is typically determined by interpolating the charge collected by several neighboring strips. However, to effectively extract the inherent positional information, the lateral spacing of the straight strips must be comparable to or preferably smaller than the full extent of the incident charge cloud. In contrast, highly interleaved anode patterns, such as zigzags, can adequately sample the incident charge with a pitch appreciably larger than the charge cloud. This has the considerable advantage of providing the same performance while requiring far fewer instrumented channels. Additionally, the geometric parameters defining such zigzag structures may be tuned to provide a near-uniform detector response along and perpendicular to the sensitive coordinate, without the need for so-called "pad response functions," while simultaneously maintaining excellent position resolution. We have measured the position resolution of a variety of zigzag-shaped anode patterns optimized for various MPGDs, including gas electron multiplyer (GEM), Micromegas, and micro-resistive-well (<inline-formula> <tex-math notation="LaTeX">\mu </tex-math></inline-formula>RWELL) and compared this performance with the same detectors equipped with straight strips of varying pitch. We report on the performance results of each readout structure, evaluated under identical conditions in a test beam.
Experimental studies of the collisions of heavy nuclei at relativistic energies have established the properties of the quark–gluon plasma (QGP), a state of hot, dense nuclear matter in which quarks ...and gluons are not bound into hadrons1–4. In this state, matter behaves as a nearly inviscid fluid5 that efficiently translates initial spatial anisotropies into correlated momentum anisotropies among the particles produced, creating a common velocity field pattern known as collective flow. In recent years, comparable momentum anisotropies have been measured in small-system proton–proton (p+p) and proton–nucleus (p+A) collisions, despite expectations that the volume and lifetime of the medium produced would be too small to form a QGP. Here we report on the observation of elliptic and triangular flow patterns of charged particles produced in proton–gold (p+Au), deuteron–gold (d+Au) and helium–gold (3He+Au) collisions at a nucleon–nucleon centre-of-mass energy \\sqrt {s_{{\mathrm{NN}}}\ = 200 GeV. The unique combination of three distinct initial geometries and two flow patterns provides unprecedented model discrimination. Hydrodynamical models, which include the formation of a short-lived QGP droplet, provide the best simultaneous description of these measurements.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
We have developed highly interleaved zigzag-shaped electrodes for collecting charge on the readout plane of various micropattern gaseous detectors (MPGDs), including gas electron multiplier (GEM) and ...micromega detectors. An optimized zigzag pad (or strip) anode can greatly enhance charge sharing among neighboring pads compared to traditional straight strip or rectangular pad designs and as a result can deliver excellent position resolution with minimal channel count, while exhibiting a virtually uniform response across the detector. We have systematically studied the effects of varying the parameters that define the zigzag geometry using simulations and have measured several printed circuit boards (PCBs) comprising a range of zigzag designs. Recently, we have employed laser ablation to generate zigzag patterns with pad-to-pad gaps smaller than 1 mil (or 25 <inline-formula> <tex-math notation="LaTeX">\mu \text{m} </tex-math></inline-formula>). Reducing the gap well below the 3-mil limit imposed by traditional chemical etching has allowed the production of zigzag electrodes with unprecedentedly small feature sizes. In turn, laser-etched zigzag PCBs were shown to exhibit markedly improved performance over earlier generation PCBs, with position resolutions below 50 <inline-formula> <tex-math notation="LaTeX">\mu \text{m} </tex-math></inline-formula> for a 2-mm pitch. This article will explore in detail the dependence of the position resolution on the structural parameters of a zigzag-shaped anode, specifically for the case of a quadruple GEM detector.
A better understanding of the linkages between aboveground and belowground biotic communities is needed for more accurate predictions about how ecosystems may be altered by climate change, land ...management, or biodiversity loss. Soil microbes are strongly affected by multiple factors including local abiotic environmental conditions and plant characteristics. To find out how soil microbial communities respond to multiple facets of the local soil and plant environment, we analysed soil lipid profiles associated with three-year-old monocultures of 29 tree species. These species are native of the diverse subtropical forests of southeast China and greatly vary in functional traits, growth or biomass characteristics, and phylogenetic relatedness. Along with the traits of each tree species, we also determined the soil and plot characteristics in each monoculture plot and tested for phylogenetic signals in tree species-specific microbial indicators. Microbial community structure and biomass were influenced by both soil properties and plant functional traits, but were not related to the phylogenetic distances of tree species. Specifically, total microbial biomass, indicators for fungi, bacteria, and actinomycetes were positively correlated with soil pH, soil organic nitrogen, and soil moisture. Our results also indicate that leaf dry matter content and the leaf carbon to nitrogen ratio influence multivariate soil microbial community structure, and that these factors and tree growth traits (height, crown or basal diameter) positively promote the abundances of specific microbial functional groups. At the same time, a negative correlation between leaf nitrogen content and Gram positive bacterial abundance was detected, indicating plant–microbial competition for nitrogen in our system. In conclusion, even at early stages of tree growth, soil microbial community abundance and structure can be significantly influenced by plant traits, in combination with local soil characteristics.
•Species identity, with soil properties, shape microbial communities even at early tree growth.•Tree species traits explain less variation in microbial communities than soil characteristics.•Tree species phylogeny itself does not drive microbial community development.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK, ZRSKP
New design studies have been carried out for a readout plane for gas electron multiplier detectors using zigzag patterns that can significantly reduce the readout channel count while preserving ...excellent spatial resolution for tracking detectors. While zigzag patterns have been used in a number of applications, these studies were designed to investigate the fundamental limits of charge sharing between the electrodes to optimize the spatial resolution and minimize the nonuniformities across the readout plane, while exploring the limits of manufacturing capabilities for producing the readout board. Simulation studies were carried out to optimize the readout electrode structure, and readout boards were produced with similar zigzag designs that were tested in the laboratory using a scanning X-ray source. These studies were aimed at developing a readout board for the new time projection chamber for the sPHENIX experiment at relativistic heavy ion collider, but can readily be used in other applications, including various micropattern gas detectors, such as Micromegas.
Recently, multiparticle-correlation measurements of relativistic p/d/^{3}He+Au, p+Pb, and even p+p collisions show surprising collective signatures. Here, we present beam-energy-scan measurements of ...two-, four-, and six-particle angular correlations in d+Au collisions at sqrts_{NN}=200, 62.4, 39, and 19.6 GeV. We also present measurements of two- and four-particle angular correlations in p+Au collisions at sqrts_{NN}=200 GeV. We find the four-particle cumulant to be real valued for d+Au collisions at all four energies. We also find that the four-particle cumulant in p+Au has the opposite sign as that in d+Au. Further, we find that the six-particle cumulant agrees with the four-particle cumulant in d+Au collisions at 200 GeV, indicating that nonflow effects are subdominant. These observations provide strong evidence that the correlations originate from the initial geometric configuration, which is then translated into the momentum distribution for all particles, commonly referred to as collectivity.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UL, UM
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a ...powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Abstract The RHIC interaction rate at sPHENIX will reach around 3 MHz in pp collisions and requires the detector readout to reject events by a factor of over 200 to fit the DAQ bandwidth of 15 kHz. ...Some critical measurements, such as heavy flavor production in pp collisions, often require the analysis of particles produced at low momentum. This prohibits adopting the traditional approach, where data rates are reduced through triggering on rare high momentum probes. We explore a new approach based on real-time AI technology, adopt an FPGA-based implementation using a custom designed FELIX-712 board with the Xilinx Kintex Ultrascale FPGA, and deploy the system in the detector readout electronics loop for real-time trigger decision.
The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider will perform high-precision measurements of jets and heavy flavor observables for a ...wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with the plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is <inline-formula> <tex-math notation="LaTeX">2.8\%\oplus 15.5\%/\sqrt {E} </tex-math></inline-formula> and the energy resolution for hadrons in the combined EMCal plus HCal system is <inline-formula> <tex-math notation="LaTeX">13.5\%\oplus 64.9\%/\sqrt {E} </tex-math></inline-formula>. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications.
We present azimuthal angular correlations between charged hadrons and energy deposited in calorimeter towers in central d+Au and minimum bias p+p collisions at sNN=200 GeV. The charged hadron is ...measured at midrapidity |eta|<0.35, and the energy is measured at large rapidity (-3.7<eta< -3.1, Au-going direction). An enhanced near-side angular correlation across | Delta eta|>2.75 is observed in d+Au collisions. Using the event plane method applied to the Au-going energy distribution, we extract the anisotropy strength v2 for inclusive charged hadrons at midrapidity up to pT=4.5 GeV/c. We also present the measurement of v2 for identified pi+ or - and (anti)protons in central d+Au collisions, and observe a mass-ordering pattern similar to that seen in heavy-ion collisions. These results are compared with viscous hydrodynamic calculations and measurements from p+Pb at sNN=5.02 TeV. The magnitude of the mass ordering in d+Au is found to be smaller than that in p+Pb collisions, which may indicate smaller radial flow in lower energy d+Au collisions.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UM
PDF
