Portable spectroscopic instruments are an interesting alternative for in-field and on-line measurements. However, the practical implementation of visible-near infrared (VIS-NIR) portable sensors in ...the forest sector is challenging due to operation in harsh environmental conditions and natural variability of wood itself. The objective of this work was to use spectroscopic methods as an alternative to visual grading of wood quality. Three portable spectrometers covering visible and near infrared range were used for the detection of selected naturally occurring wood defects, such as knots, decay, resin pockets and reaction wood. Measurements were performed on wooden discs collected during the harvesting process, without any conditioning or sample preparation. Two prototype instruments were developed by integrating commercially available micro-electro-mechanical systems with for-purpose selected lenses and light source. The prototype modules of spectrometers were driven by an Arduino controller. Data were transferred to the PC by USB serial port. Performance of all tested instruments was confronted by two discriminant methods. The best performing was the microNIR instrument, even though the performance of custom prototypes was also satisfactory. This work was an essential part of practical implementation of VIS-NIR spectroscopy for automatic grading of logs directly in the forest. Prototype low-cost spectrometers described here formed the basis for development of a prototype hyperspectral imaging solution tested during harvesting of trees within the frame of a practical demonstration in mountain forests.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Pleating is an optimal way to increase bendability of wood used in diverse industrial applications. It results in the excessive buckling of cell walls and modifications of constitutive polymers. ...However, thoughtful understanding of the physical–chemical mechanisms of that modification process is very limited. The main purpose of the present study was to identify changes in functional groups of wood polymers induced by longitudinal compression. Four types of wood samples prepared from beech and sessile oak (untreated, steamed, longitudinally compressed and fixated for 1 min as well as longitudinally compressed and fixated for 18 h) were assessed by infrared spectroscopy. The spectra interpretation revealed that changes can be observed in hydroxyl as well as in carbon–oxygen single and carbon-hydrogen functional groups of polysaccharides and lignin. Beech wood seems to be more susceptible to investigated modification processes as compared to oak. Detailed interpretation of infrared spectra allows identification of changes in the hygroscopicity of wood as well as alterations in the linkage between structural elements in the polymer matrix of wood induced by the applied treatments.
Graphic Abstract
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OBVAL, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
•FT-IR and NMR spectroscopies were used for the discrimination of samples with different geographical provenance.•T1ρ(H) values, obtained from variable contact time NMR experiments highlighted the ...differences between wood groups.•Principal component analysis of NMR and IR data allowed the most effective discrimination of wood due to provenance.
13C nuclear magnetic resonance and mid-infrared spectroscopies were used for characterizing changes in the chemical structure of wood polymers (cellulose, hemicellulose and lignin) in relation to the tree growth location. Samples of three provenances in Europe (Finland, Poland and Italy) were selected for studies. The requirement was to use untreated solid wood samples to minimize any manipulation to the nanostructure of native wood.
The results confirm that the chemical and physical properties of samples belonging to the same wood species (Picea abies Karst.) differ due to the origin. Both FT-IR and dynamic NMR spectroscopies were able to correctly discriminate samples originating from three different provenances in Europe. Such methods might be very useful for both, research and understanding of wood microstructure and its variability due to the growth conditions.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The shrinking global forest area limits the supply of industrially usable raw resources. This, in combination with the ever-increasing consumption of timber due to population growth can lead to the ...lack of a positive balance between the annual volumetric growth and consumption of wood. An important innovation toward increasing environmental and economic sustainability of timber production is to reduce the volume of wood residues by minimizing the sawing kerf. It results in higher material yield but may impact the dimensional accuracy of derived products. Therefore, the cutting tool geometry as well as the sawing process as a whole must be carefully optimized to assure optimal use of resources. The goal of this study is to better understand the causes of machining errors that occur when sawing wood with saws of varying thickness of kerf, with a special focus on re-sawing thin lamellae performed on the gang saw. Numerical simulations were tested against experimental results, considering influence of diverse components of cutting forces, in addition to the initial and operating stiffness coefficients of the saw blade. It has been demonstrated that asymmetric loads from the cutting process for the scraper saw blade can cause sawing inaccuracies. The simulation methodology developed in this research can be straightforwardly extended towards determination of optimal geometry of other cutting tools, particularly with the reduced sawing kerf. This may lead to more sustainable use of natural resources as well as an increase in economic gain for the wood processing industries.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Understanding the atomic-scale structure of wood microfibrils is essential for establishing fundamental properties in various wood-based research aspects, including moisture impact, wood ...modification, and pretreatment. In this study, we employed molecular dynamics simulations to investigate the arrangement of wood polymers, including cellulose, hemicellulose, and lignin, with a primary focus on the composition of softwood, specifically Norway Spruce wood. We assessed the accuracy of our molecular dynamics model by comparing it with available experimental data, such as density, Young’s modulus, and glass transition temperature, which ensures the reliability of our approach. A key aspect of our study involved modeling the active sorption site for water interaction with wood polymers. Our findings revealed that the interaction between water and hemicellulose, particularly within the hemicellulose–cellulose interphase, was the most prominent binding site. This observation aligns with prior research in this field, further strengthening the validity of our results.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM, UPUK
The distinct properties and affordances of paper provide benefits that enabled paper to maintain an important role in the digital age. This is so much so, that some pen–paper interaction has been ...imitated in the digital world with touchscreens and stylus pens. Because digital medium also provides several advantages not available to physical paper, there is a clear benefit to merge the two mediums. Despite the plethora of concepts, prototypes and systems to digitise handwritten information on paper, these systems require specially prepared paper, complex setups and software, which can be used solely in combination with paper, and, most importantly, do not support the concurrent precise interaction with both mediums (paper and touchscreen) using one pen only. In this paper, we present the design, fabrication and evaluation of the Hybrid Stylus. The Hybrid Stylus is assembled with the infinity pencil tip (nib) made of graphite and a specially designed shielded tip holder that is attached to an active stylus. The stylus can be used for writing on a physical paper, while it still maintains all the features needed for tablet interaction. Moreover, the stylus also allows simultaneous digitisation of handwritten information on the paper when the paper is placed on the tablet screen. In order to evaluate the concept, we also add a user-friendly manual alignment of paper position on the underlying tablet computer The evaluation demonstrates that the system achieves almost perfect digitisation of strokes (98.6% of strokes were correctly registered with only 1.2% of ghost strokes) whilst maintaining excellent user experience of writing with a pencil on the paper.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Kraft lignin, an industrially available by-product from the pulp and paper industry, has revealed enormous potential to be valorised into a wide range of chemicals and biomaterials in the last two ...decades. However, the understanding of lignin chemistry remains challenging due to its chemical complexity. The goal of this work was to investigate the effect of drying temperature on the chemical, physical, and hygroscopic properties of hardwood kraft lignin isolated from industrial black liquor and elucidate the molecular interactions occurring between water and kraft lignin. Sorption-desorption isotherms determined by dynamic vapour sorption (DVS) technique revealed that the drying process considerably affected the hygroscopicity of the lignin polymer. Moreover, analytical pyrolysis (Py–GC–MS), dynamic NIR spectra collected as a function of relative humidity (0–95%) during sorption-desorption cycles and principal component analysis (PCA), evidenced chemical differences between lignin dried at room (25 °C) temperature and mild oven (55 °C) conditions. The main spectral changes associated with the water sorption in kraft lignin samples were analyzed using difference spectrum technique. 2D NIR spectral correlation analysis provided water sorption mechanism of lignin polymer, disclosing for the first time the sequential order in which water vapour molecules interact with active sorption sites in kraft lignin.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Heterogeneity of kraft lignin is one of the main limitations for the development of high-performance applications. Therefore, refining lignin using organic solvents is a promising strategy to obtain ...homogenous fractions with controlled quality in terms of structure and properties. In this work, one-step refining processes for hardwood kraft lignin using nine organic solvents of different chemical nature and polarity were carried out with the aim of investigating and understanding the effect of the type of organic solvent on the quality of resulting fractions. Structural features of both soluble and insoluble lignin fractions were assessed by GPC, Py-GC-MS, and FTIR linked to PCA analysis. Moreover, functional properties such as physical appearance, hygroscopicity, antioxidant capacity, and thermal properties were evaluated. The results evidenced the relationship between the nature and polarity of the solvents and the properties of the obtained soluble and insoluble fractions.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Engineered wood products (EWPs) are being increasingly used as construction materials. EWPs are currently being made using synthetic adhesives or metal fasteners, which lead to poor recyclability and ...reusability. Therefore, this review paper focused on emerging adhesive- and metal-free assembling techniques including wood dowels, rotary-dowel welding, wooden nails, and dovetail joining as alternative ways of making prefabricated EWPs. This will contribute towards green construction and optimising the building process to minimise its negative impact on the environment and its inhabitants, while maximising the positive aspects of the finished structure. The respective advantages and shortcomings will be compared with those of equivalent EWPs. In general, the dowel-laminated timber (DLT) provides sufficient load-bearing capacity and even better ductility than EWPs of equivalent size, but its relatively low stiffness under a bending load limits its application as a structural element. Optimised manufacturing parameters such as dowel species, dowel spacing, dowel diameter, dowel insertion angle, dowel shape, etc. could be studied to improve the stiffness. The improved mechanical properties and tight fitting due to set-recovery of densified wood support its use as sustainable alternatives to hardwood dowels in DLT to overcome problems such as the loosening of connections over time and dimensional instability. The rotary welding technology could also enhance the strength and long-term performance of dowel-type joints, but its poor water resistance needs further investigation. The main obstacles to implementing DLT products in the market are missing technical information and design guidelines based on national codes.
Forest operations are in constant development to provide increasingly higher standards of economic and environmental sustainability. The latest innovation trends are concentrated in the generation, ...storage and management of data related to the harvesting process, timber products and logistics operations. Current technologies provide productivity and position, but only physical parameters are made available for timber products. The possibility of providing a comprehensive quality evaluation of roundwood early in the supply chain and linking the information to each log provides a new tool for optimization of the whole forest-timber supply chain. Current in-field methods for grading logs are based on visual rating scales, which are subjective, operator-dependent and time-consuming. As an alternative, a sensorized processor head was developed, featuring the following sensors: near infrared (NIR) spectrometer and hyperspectral cameras to identify surface defects, stress wave and time of flight sensors to estimate timber density, hydraulic flow sensor to estimate cross-cutting resistance and delimbing sensors to estimate branches number and approximate position. The prototype also deployed an RFID UHF system, which allowed the identification of the incoming tree and individually marked each log, relating the quality parameters recorded to the physical item and tracing it along the supply chain. The tested sensors were installed and designed to be independent, nevertheless, their integrated use provides a comprehensive evaluation of timber quality. This paper presents the technical solutions adopted, the main hindrances found and some preliminary results of the operative prototype as tested in laboratory and in forest operational conditions. Keywords: timber quality, processor head, sensors, NIR, cutting forces
PDF
