Advanced oxidation procedures (AOPs) refer to a variety of technical procedures that produce OH radicals to sufficiently oxidize wastewater, organic pollutant streams, and toxic effluents from ...industrial, hospital, pharmaceutical and municipal wastes. Through the implementation of such procedures, the (post) treatment of such waste effluents leads to products that are more susceptible to bioremediation, are less toxic and possess less pollutant load. The basic mechanism produces free OH radicals and other reactive species such as superoxide anions, hydrogen peroxide, etc. A basic classification of AOPs is presented in this short review, analyzing the processes of UV/H2O2, Fenton and photo-Fenton, ozone-based (O3) processes, photocatalysis and sonolysis from chemical and equipment points of view to clarify the nature of the reactive species in each AOP and their advantages. Finally, combined AOP implementations are favored through the literature as an efficient solution in addressing the issue of global environmental waste management.
microalgae biomass was employed for the extraction of valuable bioactive compounds with deep eutectic-based solvents (DESs). Particularly, the Choline Chloride (ChCl) based DESs, ChCl:1,2 butanediol ...(1:4), ChCl:ethylene glycol (1:2), and ChCl:glycerol (1:2) mixed with water at 70/30
/
ratio were used for that purpose. The extracts' total carotenoid (TCC) and phenolic contents (TPC), as well as their antioxidant activity (IC50), were determined within the process of identification of the most efficient solvent. This screening procedure revealed ChCl:1,2 butanediol (1:4)/H
O 70/30
/
as the most compelling solvent; thus, it was employed thereafter for the extraction process optimization. Three extraction parameters, i.e., solvent-to-biomass ratio, temperature, and time were studied regarding their impact on the extract's TCC, TPC, and IC50. For the experimental design and process optimization, the statistical tool Response Surface Methodology was used. The resulting models' predictive capacity was confirmed experimentally by carrying out two additional extractions under conditions different from the experimental design.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
The green synthesis of silver nanoparticles (AgNPs) using the cell-free supernatant of a
culture (CFS) was implemented in the current study, under illumination conditions. The reduction of Ag
to ...AgNPs by the CFS could be described by a pseudo-first-order kinetic equation at the temperature range tested. A high reaction rate during synthesis and stable AgNPs were obtained at 45 °C, while an alkaline pH (pH = 11.0) and a AgNO
aqueous solution to CFS ratio of 90:10 (
/
) proved to be the most effective conditions in AgNPs synthesis. A metal precursor (AgNO
) at the concentration range tested (1-5 mM) was the limited reactant in the synthesis process. The synthesis of AgNPs was accomplished under static and agitated conditions. Continuous stirring enhanced the rate of reaction but induced aggregation at prolonged incubation times. Zeta potential and polydispersity index measurements indicated stable AgNPs and the majority of AgNPs formation occurred in the monodisperse phase. The X-ray diffraction (XRD) pattern revealed the face-centered cubic structure of the formed AgNPs, while TEM analysis revealed that the AgNPs were of a quasi-spherical shape with a size from 30 to 50 nm. The long-term stability of the AgNPs could be achieved in darkness and at 4 °C. In addition, the synthesized nanoparticles showed antibacterial activity against
.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Toxic and heavy metals are considered harmful derivatives of industrial activities; they are not biodegradable and their accumulation in living organisms can become lethal. Among other heavy and ...toxic metals, chromium is considered hazardous, especially in the hexavalent (Cr
) form. Numerous established studies show that exposure to Cr
via drinking water leads to elevated chromium levels in tissues, which may result in various forms of cancer. The purpose of this research is to synthesize magnetite/zeolite-X composite particles for the adsorption and magnetic removal of Cr
ions from aqueous solutions. Synthesis and characterization of such composite nanomaterials, along with an initial experimental evaluation of Cr
removal from water-based solution, are presented. Results show that zeolite-X is a very promising zeolite form, that when bound to magnetic nanoparticles can be used to trap and magnetically remove toxic ions from aqueous solutions.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support ...alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Macroalgae Ulva lactuca, has been employed as a natural source for the production of extracts with potent bioactivity. The biochemical characterization showed that the macroalgae biomass contains a ...remarkable amount of the polysaccharide Ulvan (49.9 wt%) which is a valuable chemical compound well known for its benefits in human health. Four nontoxic solvents, water, ethyl acetate, ethanol, and an ethanol/water mixture (70:30 v/v) were examined for their recovery efficiency of total carotenoid and phenolic contents. Experimental results showed that the aqueous mixture of ethanol was the most efficient solvent in the recovery of bioactive compounds with extraction yield of 10–15% dw. The effect of extraction parameters, namely time, temperature, and the ratio of biomass to solvent, on the carotenoid and phenolic compounds’ content, antioxidant activity, and extraction yield, was investigated, using the ethanol/water mixture as a solvent. The extract obtained under 60 °C, 3 h of extraction time and 1:10 biomass to solvent mass ratio showed the highest antioxidant activity. This extract maintained its antioxidant capacity almost stable for five days of storage under cool and dark conditions. Finally, specific phenolic and carotenoid compounds in the U. lactuca extracts were identified using the High-Performance Liquid Chromatography (HPLC) technique.
Intensive research on the use of magnetic nanoparticles for biotechnological applications of microalgae biomass guided the development of proper treatment to successfully incorporate them into these ...single-cell microorganisms. Protoplasts, as cells lacking a cell wall, are extensively used in plant/microalgae genetic manipulation as well as various biotechnological applications. In this work, a detailed study on the formation of protoplasts from
with the use of enzymatic and mechanical procedures was performed. The optimization of several parameters affecting the formation of protoplasmic cells and cell recovery was investigated. In the enzymatic treatment, a solution of cellulase was studied at different time points of incubation, whereas in the mechanical treatment, glass beads vortexing was used. Mechanical treatment gave better results in comparison to the enzymatic one. Concerning the cell recovery, after the protoplast formation, it was found to be similar in both methods used; cell viability was not investigated. To enhance the protoplast cell wall reconstruction, different "recovery media" with an organic source of carbon or nitrogen were used. Cell morphology during all treatments was evaluated by electron microscopy. The optimal conditions found for protoplast formation and cell reconstruction were successfully used to produce
cells with magnetic properties.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Harvesting of microalgae is a crucial step in microalgae-based mass production of different high value-added products. In the present work, magnetic harvesting of Chlorella vulgaris was investigated ...using microwave-synthesized naked magnetite (Fe3O4) particles with an average crystallite diameter of 20 nm. Optimization of the most important parameters of the magnetic harvesting process, namely pH, mass ratio (mr) of magnetite particles to biomass (g/g), and agitation speed (rpm) of the C. vulgaris biomass–Fe3O4 particles mixture, was performed using the response surface methodology (RSM) statistical tool. Harvesting efficiencies higher than 99% were obtained for pH 3.0 and mixing speed greater or equal to 350 rpm. Recovery of magnetic particles via detachment was shown to be feasible and the recovery particles could be reused at least five times with high harvesting efficiency. Consequently, the described harvesting approach of C. vulgaris cells leads to an efficient, simple, and quick process, that does not impair the quality of the harvested biomass.
Microalgae as unicellular eukaryotic organisms demonstrate several advantages for biotechnological and biological applications. Natural derived microalgae products demand has increased in food, ...cosmetic and nutraceutical applications lately. The natural antioxidants have been used for attenuation of mitochondrial cell damage caused by oxidative stress. This study evaluates the in vitro protective effect of
bioactive extracts against oxidative stress in human mesenchymal stromal/stem cells (MSCs). The classical solid-liquid and the supercritical extraction, using biomass of commercially available and laboratory cultivated
, are employed. Oxidative stress induced by 300 μM H
O
reduces cell viability of MSCs. The addition of
extracts, with increased protein content compared to carbohydrates, to H
O
treated MSCs counteracted the oxidative stress, reducing reactive oxygen species levels without affecting MSC proliferation. The supercritical extraction was the most efficient extraction method for carotenoids resulting in enhanced antioxidant activity. Pre-treatment of MSCs with
extracts mitigates the oxidative damage ensued by H
O
Initial proteomic analysis of secretome from licensed (TNFα-activated) MSCs treated with algal extracts reveals a signature of differentially regulated proteins that fall into clinically relevant pathways such as inflammatory signaling. The enhanced antioxidative and possibly anti-inflammatory capacity could be explored in the context of future cell therapies.
The downstream processing of natural active molecules remains the most significant cost in the production pipeline. This considerable cost is largely attributed to rigorous chromatographic ...purification protocols. In an ongoing effort to abate the dependence on chromatography in downstream processing, alternative affinity matrices in the form of magnetic particles (e.g., iron oxide) have emerged as viable candidates. Nevertheless, biotechnological applications of iron oxide particles are still confined to the research level or for low-throughput clinical applications. Herein, we describe an efficient, quick, and environmentally friendly method for the isolation of astaxanthin and lutein, two carotenoids with very similar chemical structure, from extracts of the microalga Haematococcus pluvialis. The technology proposed, named Selective Magnetic Separation (SMS), is based on the use of magnetic materials carrying affinity ligands that bind carotenoids and is applied as second step of purification. The method, thanks to functionalized magnetic nanoparticles, reduces the use of organic or toxic solvents. In the present work, we examined the most efficient binding conditions such as temperature, magnetic nanoparticles concentration, and elution time, as well as their effects on carotenoids recovery, with the aim to improve the non-covalent binding between the ligand (amines) and astaxanthin/lutein. Our initial results clearly showed that it is possible to use magnetic separation as an alternative to chromatography to isolate important and valuable compounds.
PDF
