Abstract
We developed a reusable surface-amplified nanobiosensor for monitoring airborne viruses with a sub-PFU/mL level detection limit. Here, sandwich structures consisted of magnetic particles ...functionalized with antibodies, target viruses, and alkaline phosphatases (ALPs) were formed, and they were magnetically concentrated on Ni patterns near an electrochemical sensor transducer. Then, the electrical signals from electrochemical markers generated by ALPs were measured with the sensor transducer, enabling highly-sensitive virus detection. The sandwich structures in the used sensor chip could be removed by applying an external magnetic field, and we could reuse the sensor transducer chip. As a proof of concepts, the repeated detection of airborne influenza virus using a single sensor chip was demonstrated with a detection limit down to a sub-PFU/mL level. Using a single reusable sensor transducer chip, the hemagglutinin (HA) of influenza A (H1N1) virus with different concentrations were measured down to 10 aM level. Importantly, our sensor chip exhibited reliable sensing signals even after more than 18 times of the repeated HA sensing measurements. Furthermore, airborne influenza viruses collected from the air could be measured down to 0.01 PFU/mL level. Interestingly, the detailed quantitative analysis of the measurement results revealed the degradation of HA proteins on the viruses after the air exposure. Considering the ultrasensitivity and reusability of our sensors, it can provide a powerful tool to help preventing epidemics by airborne pathogens in the future.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Sweet taste is an important factor that regulates calorie intake and contributes to food preferences in humans and animals. Therefore, the evaluation of sweet substances is essential for various ...fields such as healthcare, food, and pharmaceutical industries. Sweet tastants are detected by sweet taste receptors which are class C G-protein-coupled receptors. T1R2 venus flytrap (VFT) of the sweet taste receptor is known as a primary ligand-binding domain for sweet tastants. In this study, we developed an ultrasensitive artificial sweet taste bioelectronic tongue based on the T1R2 VFT of a human sweet taste receptor. Here, the T1R2 VFT of a human sweet taste receptor was successfully overexpressed in a bacterial expression system. A T1R2 VFT-immobilized carbon nanotube field-effect transistor with floating electrodes was exploited as an artificial sweet taste sensory system. Significantly, our T1R2 VFT-functionalized bioelectronic tongue could be used to detect solutions of sweet tastants down to 0.1 fM and selectively discriminate sweet substances from other taste substances. Furthermore, our device could be used to monitor the response of the T1R2 VFT domain of a sweet taste receptor to sweet substances in real food environments such as apple juice and chamomile herb tea. Moreover, our device was used to evaluate the inhibition and enhancement effects on sweet taste receptors by zinc ions and chamomile tea, respectively. In addition, our device demonstrated long-term storability and reusability. In this respect, our sweet taste bioelectronic tongue could be a promising tool for various basic research and industrial applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
The superconductor-insulator (SI) transition in two-dimensional Ta thin films is investigated by controlling both film thickness and magnetic field. An intriguing metallic phase appears between a ...superconducting and an insulating phase within a range of film thickness and magnetic field. The temperature and electric field scaling analyses are performed to investigate the nature of the SI transition in the thickness-tuned metallic and superconducting samples. The critical exponents product of νz obtained from the temperature scaling analysis is found to be approximately 0.67 in the entire range of film thickness. On the other hand, an apparent discrepancy is measured in the product of ν(z + 1) by the electric filed analysis. The product values are found to be about 1.37 for the superconducting films and about 1.86 for the metallic films respectively. We find that the discrepancy is the direct consequence of electron heating that introduces additional dissipation channels in the metallic Ta films.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
We developed a reusable magnetic surface plasmon resonance (SPR) sensor chip for detecting various target molecules repeatedly in a conventional SPR system. Here, ferromagnetic patterns on a SPR ...sensor chip were utilized to trap a layer of magnetic particles, and they were utilized as a solid substrate for SPR sensing in a conventional SPR system. After a sensing experiment, the used magnetic particles were removed by external magnetic fields, and a new layer of magnetic particles was immobilized to the SPR sensor chip for additional sensing measurements. Since magnetic particles were trapped on the ferromagnetic patterns, we could use our reusable SPR chip for SPR sensing measurements in a traditional SPR system without any applied magnetic fields. Significantly, ferromagnetic patterns on the sensor chip surface deflected the strong external fields, so that the large aggregation of magnetic particles on the sensor surface was reduced. We demonstrated using a single reusable SPR sensor chip to measure the nucleoprotein (NP) of H1N1 influenza virus solution ranging repeatedly for more than 7 times without significant signal degradation. Also, different target molecules could be repeatedly measured in a single SPR chip. Since our reusable SPR sensor chip can be repeatedly used in a conventional SPR system without any chemical processes for refreshment, the cost for SPR sensing should be significantly reduced. In this case, our reusable SPR sensor chip can be a major breakthrough and can be used for versatile practical applications of SPR sensors.
•A reusable surface plasmon resonance (SPR) sensor chip was developed to repeatedly detect target molecules.•Ferromagnetic patterns on solid substrates trapped functionalized magnetic particles, and they were used for SPR sensing.•Our SPR chip can be used in conventional SPR systems without magnetic fields since ferromagnetic patterns hold the particles.•We could repeatedly detect the nucleoprotein of H1N1 influenza virus and other target molecules using a single SPR chip.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Abstract
We investigated the transport characteristics of a square shape superconducting Ta thin film under DC electrical current bias along the diagonal direction. The resistance parallel (
R
∥
) ...and perpendicular (
R
⊥
) to the DC current,
I
DC
, is measured with various magnetic fields.
R
∥
and
R
⊥
show contrasting dependence on
I
DC
. First, the critical current of
R
∥
is smaller than that of
R
⊥
. Second,
R
⊥
shows an unexpected reduction at current bias where
R
∥
shows a rapid increase near the transition from a flux flow state to a normal state. The intriguing anisotropic transport characteristics can be understood by the inhomogeneous current density profile over the square sample. Diagonal DC current induces an anisotropic current density profile where the current density is high near the biasing electrode and low at the center of the sample. Accordingly, the electrical transport in the perpendicular direction could remain less affected even near the critical current of
R
∥
, which leads to the higher critical current in
R
⊥
. Complicated conduction profile may also allow the anomalous reduction in the
R
⊥
before finally shifting to the normal state.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Much progress has been made in the nanoscale analysis of nanostructures, while the mapping of key charge transport properties such as a carrier mobility remains a challenge, especially for ...one-dimensional systems. Here, we report the nanoscale mapping of carrier mobilities in carbon nanotube (CNT) networks and show that charge transport behaviors varied depending on network structures. In this work, the spatial distribution of localized charge transport properties such as mobilities and charge trap densities in CNT networks were mapped via a scanning noise microscopy. The mobility map was obtained from the conductivity maps measured at different back-gate biases, showing up to two orders of mobility variations depending on localized network structures. Furthermore, from the maps, correlations between mobility/conductivity and charge trap density were analyzed to determine charge transport mechanisms. In metallic CNT networks, the regions with rather high (low) or low (high) charge trap densities (mobilities) exhibited a diffusive or ballistic transport behavior, respectively. Interestingly, semiconducting CNT networks also exhibited a gradual transition from a diffusive to a ballistic transport behavior as the CNT mobility was increased by reaching the on-state with negative gate biases. The mapping of the cross-patterned CNT network showed that metallic CNT electrodes could achieve a good electrical contact with semiconducting CNTs without high contact resistance regions. Since this method allowed one to map versatile charge transport properties such as mobility, conductivity, and charge trap density, it can be a powerful tool for basic research about charge transport phenomena and practical device applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
We have developed an automated sensing system for the repeated detection of a specific microRNA (miRNA) of the influenza A (H1N1) virus. In this work, magnetic particles functionalized with DNAs, ...target miRNAs, and alkaline phosphate (ALP) enzymes formed sandwich structures. These particles were trapped on nickel (Ni) patterns of our sensor chip by an external magnetic field. Then, additional electrical signals from electrochemical markers generated by ALP enzymes were measured using the sensor, enabling the highly sensitive detection of target miRNA. The magnetic particles used on the sensor were easily removed by applying the opposite direction of external magnetic fields, which allowed us to repeat sensing measurements. As a proof of concept, we demonstrated the detection of miRNA-1254, one of the biomarkers for the H1N1 virus, with a high sensitivity down to 1 aM in real time. Moreover, our sensor could selectively detect the target from other miRNA samples. Importantly, our sensor chip showed reliable electrical signals even after six repeated miRNA sensing measurements. Furthermore, we achieved technical advances to utilize our sensor platform as part of an automated sensing system. In this regard, our reusable sensing platform could be utilized for versatile applications in the field of miRNA detection and basic research.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Site-selective drug effects on the ion-channel activities of γ-aminobutyric acid type A (GABAA) receptors are evaluated by using a nanovesicle-carbon nanotube hybrid device. Here, nanovesicles ...containing GABAA receptors are immobilized on the channel region of a carbon nanotube field-effect transistor. The receptor responses of this hybrid device to GABA are detected with a high sensitivity down to ∼1 aM even in the presence of other neurotransmitters. Further, sensitivity differences between two GABAA-receptor-subunit compositions of α5β2γ2 and α1β2γ2 are assessed by normalizing the dose-dependent responses obtained from these hybrid devices. Specifically, the GABA concentration that produces 50% of maximal response (EC50) is obtained as ∼10 pM for α5β2γ2 subunits and ∼1 nM for α1β2γ2 subunits of GABAA receptor. Significantly, the potency profiles of both antagonist and agonist of GABAA receptor can be evaluated by analyzing EC50 values in the presence and absence of those drugs. A competitive antagonist increases the EC50 value of GABA by binding to the same site as GABA, while an allosteric agonist reduces it by binding to a different site. These results indicate that this hybrid device can be a powerful tool for the evaluation of candidate drug substances modulating GABA-mediated neurotransmission.
•A nanovesicle-CNT hybrid device was developed to measure the drug effects on GABAA receptor activities.•The hybrid device can detect GABA down to 1 aM concentration.•Sensitivity differences between various subunit compositions of GABAA receptor were assessed by these hybrid devices.•The potency profiles of both antagonist and agonist drugs were evaluated by analyzing EC50 values.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Nanomechanical resonances coupled to microwave cavities can be excited, measured, and controlled simultaneously using electromechanical back-action phenomena. Examples of these effects include ...sideband cooling and amplification, which are commonly described through linear equations of motion governed by an effective optomechanical Hamiltonian. However, this linear approximation is invalid when the pump-induced cavity microwave field is large enough to trigger optomechanical nonlinearities, resulting in phenomena like frequency combs. Here, we employ a niobium-based superconducting electromechanical device to explore the generation of microwave frequency combs. We observe the formation of combs around a microwave resonant frequency (3.78 GHz) with 8-MHz frequency spacing, equal to the mechanical resonant frequency. We investigate their dynamics for different optomechanical parameters, including detuning, pump powers, and cavity decay rates. Our experimental results show excellent agreement with numerical modeling. These electromechanical frequency combs can be beneficial in nanomechanical sensing applications that require precise electrical tracking of mechanical resonant frequencies.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
PDF
