The world is confronted with the twin crises of fossil fuel depletion and environmental degradation. The indiscriminate extraction and consumption of fossil fuels have led to a reduction in petroleum ...reserves. Petroleum based fuels are obtained from limited reserves. These finite reserves are highly concentrated in certain region of the world. Therefore, those countries not having these resources are facing a foreign exchange crisis, mainly due to the import of crude petroleum oil. Hence it is necessary to look for alternative fuels, which can be produced from materials available within the country. Although vegetative oils can be fuel for diesel engines, but their high viscosities, low volatilities and poor cold flow properties have led to the investigation of its various derivatives. Among the different possible sources, fatty acid methyl esters, known as Biodiesel fuel derived from triglycerides (vegetable oil and animal fates) by transesterification with methanol, present the promising alternative substitute to diesel fuels and have received the most attention now a day. The main advantages of using Biodiesel are its renewability, better quality exhaust gas emission, its biodegradability and the organic carbon present in it is photosynthetic in origin. It does not contribute to a rise in the level of carbon dioxide in the atmosphere and consequently to the green house effect. This paper reviews the source of production and characterization of vegetable oils and their methyl ester as the substitute of the petroleum fuel and future possibilities of Biodiesel production.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Natural changes in climate due to internal as well as external factors, like anthropogenic emission, fossil fuel combustion, transportation and heating which cause CO2 emissions is one of the major ...issues which causes global warming (increasing concentrations of greenhouse gases). The production of algae is identified as one of the solutions of carbon sequestration along with production of renewable fuel solving the problem of food crisis to a certain extent. This review paper summarizes how CO2 levels affected micro algal species. Several species of algae as Scenedesmus obliquus, Botryococcus braunii, Chlorella vulgaris, Nannochloropsis oculata have been reported to accumulate high concentration of lipid. These species are suitable for biofuel production as well as Carbon fixation.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Leaf rust (Puccinia triticina Eriks.) is a fungal disease of wheat (Triticum spp.), which causes considerable yield loss. Adult plant resistance (APR) is one of the most sustainable approaches to ...control leaf rust. In this study, field-testing was carried out across ten different locations, followed by molecular screening, to detect the presence of APR genes, Lr34+, Lr46+, Lr67+ and Lr68 in Indian wheat germplasm. In field screening, 190 wheat accessions were selected from 6,319 accessions based on leaf tip necrosis (LTN), disease severity and the average coefficient of infection. Molecular screening revealed that 73% of the accessions possessed known APR genes either as single or as a combination of two or three genes. The occurrence of increased LTN intensity, decreased leaf rust severity and greater expression of APR genes were more in relatively cooler locations. In 52 lines, although the presence of the APR genes was not detected, it still displayed high levels of resistance. Furthermore, 49 accessions possessing either two or three APR genes were evaluated for stability across locations for grain yield. It emerged that eight accessions had wider adaptability. Resistance based on APR genes, in the background of high yielding cultivars, is expected to provide a high level of race non-specific resistance, which is durable.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
•Genetic gain for rice grain yield for International Rice Research Institute drought breeding program was estimated.•Positive trend of 0.68 %, 0.87 %, 1.9 % under irrigated control, moderate and ...severe drought achieved.•Superiority of new rice varieties over currently grown demonstrated on farmers’ fields.•International Rice Research Institute developed rice varieties can protect farmers from crop losses under drought conditions.
The complexity of genotype × environment interactions under drought reduces heritability, which determines the effectiveness of selection for drought tolerance and development of drought tolerant varieties. Genetic progress measured through changes in yield performance over time is important in determining the efficiency of breeding programmes in which test cultivars are replaced each year on the assumption that the new cultivars will surpass the older cultivars. The goal of our study was to determine the annual rate of genetic gain for rice grain yield in a drought-prone rainfed system in a series of multi-environment trials conducted from 2005 to 2014 under the Drought Breeding Network of Indian sites in collaboration with the International Rice Research Institute (IRRI). Our results show a positive trend in grain yield with an annual genetic yield increase of about 0.68 % under irrigated control, 0.87 % under moderate reproductive stage drought stress and 1.9 % under severe reproductive stage drought stress due to breeding efforts. The study also demonstrates the effectiveness of direct selection for grain yield under both irrigated control as well as managed drought stress screening to improve yield in typical rainfed systems. IRRI's drought breeding programme has exhibited a significant positive trend in genetic gain for grain yield over the years under both drought stress as well as favorable irrigated control conditions. Several drought tolerant varieties released from the programme have outperformed the currently grown varieties under varied conditions in the rainfed environments on farmers’ fields.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The growing demand for non-ferrous metals (Aluminium, Copper, Nickle, Lead and Zinc) has grown the non-ferrous metallurgical industry, which generate huge amount of solid waste. Most common method ...for the disposal of these solid wastes is dumping at sites, which pollutes the soil and water and covers the useful land. Geopolymerization technique can be very helpful for the safe disposal of these solid wastes, which converts the solid wastes into valuable construction materials such as binders, mortar, bricks, paving blocks and concrete etc. However, to commercialize the use of these construction products, some key aspects require detailed examination. Alternative techniques and materials will have to be identified to increase their reactivity in geopolymerization and in-depth knowledge of reaction mechanism, mix design, strength and durability characteristics of resulting geopolymer will have to be studied. The present paper reviews the important studies on geopolymerization of different solid wastes produced from non-ferrous industry. The optimum synthesis parameters such as alkali activators, curing temperature, curing time and molar ratio etc. for the geopolymerization of these solid wastes are reported and exiting gaps and future trends are also discussed.
•Different solid wastes produced from non-ferrous industry have been reviewed.•Optimum synthesis parameters for geopolymerization of solid wastes are reported.•Valued construction materials can be obtained by geopolymerization of solid wastes.•Key barriers in geopolymerization are processing methods & activators availability.•Future research required on properties of resultant geopolymer from solid wastes.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Molecular docking studies on protein-peptide interactions are a challenging and time-consuming task because peptides are generally more flexible than proteins and tend to adopt numerous ...conformations. There are several benchmarking studies on protein-protein, protein-ligand and nucleic acid-ligand docking interactions. However, a series of docking methods is not rigorously validated for protein-peptide complexes in the literature. Considering the importance and wide application of peptide docking, we describe benchmarking of 6 docking methods on 133 protein-peptide complexes having peptide length between 9 to 15 residues. The performance of docking methods was evaluated using CAPRI parameters like FNAT, I-RMSD, L-RMSD.
Firstly, we performed blind docking and evaluate the performance of the top docking pose of each method. It was observed that FRODOCK performed better than other methods with average L-RMSD of 12.46 Å. The performance of all methods improved significantly for their best docking pose and achieved highest average L-RMSD of 3.72 Å in case of FRODOCK. Similarly, we performed re-docking and evaluated the performance of the top and best docking pose of each method. We achieved the best performance in case of ZDOCK with average L-RMSD 8.60 Å and 2.88 Å for the top and best docking pose respectively. Methods were also evaluated on 40 protein-peptide complexes used in the previous benchmarking study, where peptide have length up to 5 residues. In case of best docking pose, we achieved the highest average L-RMSD of 4.45 Å and 2.09 Å for the blind docking using FRODOCK and re-docking using AutoDock Vina respectively.
The study shows that FRODOCK performed best in case of blind docking and ZDOCK in case of re-docking. There is a need to improve the ranking of docking pose generated by different methods, as the present ranking scheme is not satisfactory. To facilitate the scientific community for calculating CAPRI parameters between native and docked complexes, we developed a web-based service named PPDbench ( http://webs.iiitd.edu.in/raghava/ppdbench/ ).
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The efficient (site-specific) management of soil nutrients is possible by understanding the spatial variability in distribution of phyto-available nutrients (here after called available nutrients) ...and identifying the soil management zones (MZs) of agricultural landscapes. There is need for delineating soil MZs of agricultural landscapes of the world for efficient management of soil nutrients in order to obtain sustainability in crop yield. The present study was, therefore, undertaken to understand the spatial distribution pattern of available micronutrients (zinc (Zn), boron (B), iron (Fe), manganese (Mn) and copper (Cu)), available sulphur (S), and soil properties (soil acidity (pH), electrical conductivity (EC) and organic carbon (SOC) content) in soils of intensively cultivated Indo-Gangetic Plain (IGP) of India and to delineate soil MZs for efficient management of soil nutrients. Totally, 55101 soil samples from 0-15 cm depth were obtained from 167 districts of IGP during 2014 to 2017 and were analysed for different soil parameters. Soil pH, EC and SOC content varied from 4.44 to 9.80, 0.02 to 2.13 dS m.sup.-1 and 0.10 to 1.99%, respectively. The concentration of available Zn, B, Fe, Mn, Cu and S varied from 0.01 to 3.27, 0.01 to 3.51, 0.19 to 55.7, 0.05 to 49.0, 0.01 to 5.29 and 1.01 to 108 mg kg.sup.-1, respectively. Geostatistical analysis resulted in varied distribution pattern of studied soil parameters with moderate to strong spatial dependence. The extent (% area) of nutrient deficiencies in IGP followed the order: S > Zn > B > Mn > Cu > Fe. Principal component analysis and fuzzy c-means clustering produced six distinctly different soil MZs of IGP for implementation of zone-specific soil nutrient management strategies for attaining sustainability in crop yield. The developed MZ maps could also be utilized for prioritization and rationalization of nutrients supply in IGP of India.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Aims
To evaluate the potential of chitinolytic endophytic Actinomycetes isolated from medicinal plants in order to diminish the collar rot infestation induced by Sclerotium rolfsii in chickpea.
...Methods and Results
Sixty‐eight chitinolytic endophytic Actinomycetes were recovered from various medicinal plants and evaluated for their chitinase activity. Among these isolates, 12 were screened for their plant growth promoting abilities and antagonistic potential against Sc. rolfsii. Further, these isolates were validated in vivo for their ability to protect chickpea against Sc. rolfsii infestation under greenhouse conditions. The isolates significantly (P < 0·05) increased the biomass (1·2–2·0 fold) and reduced plant mortality (42–75%) of chickpea. On the basis of 16S rDNA profiling, the selected antagonistic strains were identified as Streptomyces diastaticus, Streptomyces fradiae, Streptomyces olivochromogenes, Streptomyces collinus, Streptomyces ossamyceticus and Streptomyces griseus.
Conclusion
This study is the first report of the isolation of endophytic Actinomycetes from various medicinal plants having antagonistic and plant growth promoting abilities. The isolated species showed potential for controlling collar rot disease on chickpea and could be useful in integrated control against diverse soil borne plant pathogens.
Significance and Impact of the Study
Our investigation suggests that endophytic Actinomycetes associated with medicinal plants can be used as bioinoculants for developing safe, efficacious and environment‐friendly biocontrol strategies in the near future.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
In the past, many methods have been developed for peptide tertiary structure prediction but they are limited to peptides having natural amino acids. This study describes a method PEPstrMOD, which is ...an updated version of PEPstr, developed specifically for predicting the structure of peptides containing natural and non-natural/modified residues.
PEPstrMOD integrates Forcefield_NCAA and Forcefield_PTM force field libraries to handle 147 non-natural residues and 32 types of post-translational modifications respectively by performing molecular dynamics using AMBER. AMBER was also used to handle other modifications like peptide cyclization, use of D-amino acids and capping of terminal residues. In addition, GROMACS was used to implement 210 non-natural side-chains in peptides using SwissSideChain force field library. We evaluated the performance of PEPstrMOD on three datasets generated from Protein Data Bank; i) ModPep dataset contains 501 non-natural peptides, ii) ModPep16, a subset of ModPep, and iii) CyclicPep contains 34 cyclic peptides. We achieved backbone Root Mean Square Deviation between the actual and predicted structure of peptides in the range of 3.81-4.05 Å.
In summary, the method PEPstrMOD has been developed that predicts the structure of modified peptide from the sequence/structure given as input. We validated the PEPstrMOD application using a dataset of peptides having non-natural/modified residues. PEPstrMOD offers unique advantages that allow the users to predict the structures of peptides having i) natural residues, ii) non-naturally modified residues, iii) terminal modifications, iv) post-translational modifications, v) D-amino acids, and also allows extended simulation of predicted peptides. This will help the researchers to have prior structural information of modified peptides to further design the peptides for desired therapeutic property. PEPstrMOD is freely available at http://osddlinux.osdd.net/raghava/pepstrmod/.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
THPdb (http://crdd.osdd.net/raghava/thpdb/) is a manually curated repository of Food and Drug Administration (FDA) approved therapeutic peptides and proteins. The information in THPdb has been ...compiled from 985 research publications, 70 patents and other resources like DrugBank. The current version of the database holds a total of 852 entries, providing comprehensive information on 239 US-FDA approved therapeutic peptides and proteins and their 380 drug variants. The information on each peptide and protein includes their sequences, chemical properties, composition, disease area, mode of activity, physical appearance, category or pharmacological class, pharmacodynamics, route of administration, toxicity, target of activity, etc. In addition, we have annotated the structure of most of the protein and peptides. A number of user-friendly tools have been integrated to facilitate easy browsing and data analysis. To assist scientific community, a web interface and mobile App have also been developed.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
PDF
