In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high ...gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV m−1. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 m. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by 50 nm-rad normalized emittances. The emittance, we note, is the effective area in transverse phase space (x, p x /m e c) or (y, p y /m e c) occupied by the beam distribution, and it is relevant to achievable beam sizes as well as setting a limit on FEL wavelength. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine-including the imaging of virus particles-which may profit from this new model of performing XFEL science.
Accelerating structures operating in Ka-Band are foreseen to achieve gradients around 150 MV/m. Among possible applications of a Ka-Band accelerating structure we refer to the beam phase-space ...manipulation for the Compact Light XLS project as well and medical and industrial applications. In this paper, a Ka-Band Klystron amplifier is being investigated in order to feed Ka-Band accelerating structures. The initial design is presented including the high-power DC gun and the beam focusing channel.
In the framework of the Compact Light XLS project, we have designed a higher harmonic RF accelerating structure in order to linearize the longitudinal space phase. The design of this compact ...Traveling Wave (TW) accelerating structure operating on the third harmonic with respect to the linac frequency (11.994 GHz) with a (100-125) MV/m accelerating gradient is presented, together with numerical electromagnetic simulations were carried out by using the numerical codes High Frequency Structure Simulator (HFSS) and CST Particle Studio.
Recent studies of the performance of radio-frequency (rf) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We ...propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant increase in five-dimensional electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, by examining an S-band photoinjector operated at250MV/mpeak electric field that reaches normalized emittances in the 40 nm-rad range at charges (100–200 pC) suitable for use in a hard x-ray free-electron laser (XFEL) scenario based on the LCLS. In this case, we show by start-to-end simulations that the properties of this source may give rise to high efficiency operation of an XFEL, and permit extension of the photon energy reach by an order of magnitude, to over 80 keV. The brightness needed for such XFELs is achieved through low source emittances in tandem with high current after compression. In the XFEL examples analyzed, the emittances during final compression are preserved using microbunching techniques. Extreme low emittance scenarios obtained at pC charge, appropriate for significantly extending temporal resolution limits of ultrafast electron diffraction and microscopy experiments, are also reviewed. While the increase in brightness in a cryogenic photoinjector is mainly due to the augmentation of the emission current density via field enhancement, further possible increases in performance arising from lowering the intrinsic cathode emittance in cryogenic operation are also analyzed. Issues in experimental implementation, including cavity optimization for lowering cryogenic thermal dissipation, external coupling, and cryocooler system, are discussed. We identify future directions in ultrahigh field cryogenic photoinjectors, including scaling to higher frequency, use of novel rf structures, and enabling of an extremely compact hard x-ray FEL.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UL, UM, UPUK
The China Seismo-Electromagnetic Satellite (CSES) aims to monitor electromagnetic, particle, and plasma perturbations in the iono-magnetosphere and inner Van Allen radiation belts originated by ...electromagnetic sources external and internal to the geomagnetic cavity, cosmic rays, and solar events. In particular, the objective of the space mission is to investigate lithosphere-atmosphere-ionosphere coupling mechanisms (including the effects of lightning, earthquakes, volcanoes, and artificial electromagnetic emissions) that induce perturbations of the top side of the ionosphere and lower boundary of the radiation belts. To this purpose, the mission has been conceived to take advantage of a multi-instrument payload comprising nine detectors for the measurement of electromagnetic field components, plasma parameters, and energetic particles, as well as X-ray flux. The Italian team participating in the CSES mission has built one of these devices, the High-Energy Particle Detector (HEPD), for high-precision observations of electrons, protons, and light nuclei. During its trip along the orbit, and thanks to the large set of detectors operated on board, CSES completely monitors the Earth, acting as an excellent instrument for space weather. The satellite was launched on 2018 February 2, with an expected life span of 5 yr. This article describes the CSES mission with a particular focus on the HEPD apparatus and its in-flight performance.
Abstract
Space charge forces represent main induced effects in an RF-injector that degrade the beam quality. In this scenario the laser distribution sent on the photocathode acquires an important ...role in the emittance compensation process, as the slice analysis shows. Starting from the preliminary studies performed on 1, a novel semi-analytical model of space charge forces is proposed in detail for bunch with arbitrary charge distribution to derive expressions of self-induced forces. The performance of the fields at low energy regime (as the field has not expired RF forces) is under present analysis, we can investigate use of this model in low charge regime. Further, the model has been bench-marked with the behavior of the distributions present in the literature and studied for new ones. It has also been applied for the study of the optimization of a C-band hybrid photoinjector now being commissioned, thus explaining the factor two reduction of the emittance observed at the exit of the gun by changing the initial distribution at the cathode.
Self-consistent analytic and numeric design for a set of electron guns with a high beams quality to be used in high-power Ka-band klystrons is presented in this paper. The set of electron guns can be ...used in the high-power Ka-band klystrons in order to feed linear accelerating structures at 36 GHz with an estimated 20 MW input power by achieving an effective accelerating electric field in the (100–150) MV/m range. In the framework of the Compact Light XLS project, a short Ka-band linearizer by working at 36 GHz able to provide an integrated voltage of at least 15 MV is proposed for bunch-phase linearization. In order to optimize the Ka-band klystrons efficiency for achieving 20 MW RF output power, different electron guns, beam focusing channel designs and the RF beam dynamics are examined and discussed in this paper.
Full text
Available for:
EMUNI, FIS, FZAB, GEOZS, GIS, IJS, IMTLJ, KILJ, KISLJ, MFDPS, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, SBMB, SBNM, UKNU, UL, UM, UPUK, VKSCE, ZAGLJ
Ultra high-gradient accelerating structures are needed for the next generation of compact light sources. In the framework of the Compact Light XLS project, we are studying a high harmonic ...traveling-wave accelerating structure operating at a frequency of 35.982 GHz, in order to linearize the longitudinal space phase. In this paper, we propose a new analytical approach for the estimation of the group velocity in the structure and we compare it with numerical electromagnetic simulations that are carried out by using the code HFSS in the frequency domain.
Linacs for high-energy physics, as well as for industry and medicine, require accelerating structures which are compact, robust, and cost-effective. Small foot-print linacs require high-accelerating ...gradients. Currently, stable-operating gradients, exceeding100MV/m, have been demonstrated at SLAC National Accelerator Laboratory, CERN, and KEK at X-band frequencies. Recent experiments show that accelerating cavities made out of hard copper alloys achieve better high-gradient performance as compared with soft copper cavities. In the scope of a decade-long collaboration between SLAC, INFN-Frascati, and KEK on the development of innovative high-gradient structures, this particular study focuses on the technological developments directed to show the viability of novel welding techniques. Two novel X-band accelerating structures, made out of hard copper, were fabricated at INFN-Frascati by means of clamping and welding. One cavity was welded with the electron beam and the other one with the tungsten inert gas welding process. In the technological development of the construction methods of high-gradient accelerating structures, high-power testing is a critical step for the verification of their viability. Here, we present the outcome of this step—the results of the high-power rf tests of these two structures. These tests include the measurements of the breakdown rate probability used to characterize the behavior of vacuum rf breakdowns, one of the major factors limiting the operating accelerating gradients. The electron beam welded structure demonstrated accelerating gradients of90MV/mat a breakdown rate of10−3/(pulsemeter)using a shaped pulse with a 150 ns flat part. Nevertheless, it did not achieve its ultimate performance because of arcing in the mode launcher power coupler. On the other hand, the tungsten inert gas welded structure reached its ultimate performance and operated at about a150MV/mgradient at a breakdown rate of10−3/(pulsemeter)using a shaped pulse with a 150 ns flat part. The results of both experiments show that welding, a robust, and low-cost alternative to brazing or diffusion bonding, is viable for high-gradient operation. This approach enables the construction of multicell standing and traveling-wave accelerating structures.
Full text
Available for:
CMK, CTK, FMFMET, IJS, NUK, PNG, UL, UM, UPUK
Pure oxygen-free high-conductivity copper is a widely used material for manufacturing accelerating cavities working at room temperature. Several studies attempted to explain limitations associated ...with the maximum allowed field gradients and the behaviour of vacuum RF breakdown in copper accelerating structures through generation and movement of dislocations under stresses associated with RF electric and magnetic fields. Pure copper and also copper alloys undergo mechanical and thermal treatments to be hardened and strengthened during manufacturing, although their mechanical properties significantly change after heating above 590ˆC. High temperature brazing and diffusion bonding are assembly methods widely used to manufacture ultra-high vacuum accelerating devices. However, these processes, occurring at about 800–1000ˆC, significantly affect the mechanical properties of copper and copper alloys. We present here a novel Tungsten Inert Gas welding procedure, which is fast and keeps the high-gradient surfaces of the cavity and other components well below the copper annealing temperature. This process may be successfully used to manufacture copper-based accelerating components. This technology preserves the hardness and cleanliness of copper in order to achieve the maximum accelerating gradient.