Bifunctional oxygen catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with high activities and low‐cost are of prime importance and challenging in the development of ...fuel cells and rechargeable metal–air batteries. This study reports a porous carbon nanomaterial loaded with cobalt nanoparticles (Co@NC‐x/y) derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework, which exhibits incredibly high activity as bifunctional oxygen catalysts. For instance, the optimal catalyst of Co@NC‐3/1 has the interconnected framework structure between porous carbon and embedded carbon nanotubes, which shows the superb ORR activity with onset potential of ≈1.15 V and half‐wave potential of ≈0.93 V. Moreover, it presents high OER activity that can be further enhanced to over commercial RuO2 by P‐doped with overpotentials of 1.57 V versus reversible hydrogen electrode at 10 mA cm−2 and long‐term stability for 2000 circles and a Tafel slope of 85 mV dec−1. Significantly, the nanomaterial demonstrates better catalytic performance and durability than Pt/C for ORR and commercial RuO2 and IrO2 for OER. These findings suggest the importance of a synergistic effect of graphitic carbon, nanotubes, exposed Co–Nx active sites, and interconnected framework structure of various carbons for bifunctional oxygen electrocatalysts.
A porous carbon nanomaterial (Co@NC‐x/y) embedded with cobalt nanoparticles and rooted with nanotubes derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework is reported. The optimal catalyst of Co@NC‐3/1 shows the superb oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities. And its mechanism is thoroughly discussed.
Full text
Available for:
FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Developing high-performance electrocatalysts toward hydrogen evolution reaction is important for clean and sustainable hydrogen energy, yet still challenging. Herein, we report a single-atom strategy ...to construct excellent metal-organic frameworks (MOFs) hydrogen evolution reaction electrocatalyst (NiRu
-BDC) by introducing atomically dispersed Ru. Significantly, the obtained NiRu
-BDC exhibits outstanding hydrogen evolution activity in all pH, especially with a low overpotential of 36 mV at a current density of 10 mA cm
in 1 M phosphate buffered saline solution, which is comparable to commercial Pt/C. X-ray absorption fine structures and the density functional theory calculations reveal that introducing Ru single-atom can modulate electronic structure of metal center in the MOF, leading to the optimization of binding strength for H
O and H*, and the enhancement of HER performance. This work establishes single-atom strategy as an efficient approach to modulate electronic structure of MOFs for catalyst design.
Materials with tunable long persistent luminescence (LPL) properties have wide applications in security signs, anti‐counterfeiting, data encrypting, and other fields. However, the majority of ...reported tunable LPL materials are pure organic molecules or polymers. Herein, a series of metal‐organic coordination polymers displaying color‐tunable LPL were synthesized by the self‐assembly of HTzPTpy ligand with different cadmium halides (X=Cl, Br, and I). In the solid state, their LPL emission colors can be tuned by the time‐evolution, as well as excitation and temperature variation, realizing multi‐mode dynamic color tuning from green to yellow or green to red, and are the first such examples in single‐component coordination polymer materials. Single‐crystal X‐ray diffraction analysis and theoretical calculations reveal that the modification of LPL is due to the balanced action from single molecule and aggregate triplet excited states caused by an external heavy‐atom effect. The results show that the rational introduction of different halide anions into coordination polymers can realize multi‐color LPL.
By delicate design of coordination polymers incorporating different halogens, multi‐mode color‐tunable long persistent luminescence (LPL) from green to yellow or green to red was possible. The LPL emission colors can be tuned by time, excitation, and temperature, revealing the counter‐balanced mechanisms from single‐molecule and aggregate triplet excited states resulting from an external heavy‐atom effect.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Metal-organic frameworks (MOFs) have been recognized as compelling platforms for the development of miscellaneous applications because of their structural diversity and functional tunability. Here, ...we propose that the electrocatalytic properties could be well modified by incorporating missing linkers into the MOF. Theoretical calculations suggest the electronic structure of MOFs can be tuned by introducing missing linkers, which improves oxygen evolution reaction (OER) performance of the MOF. Inspired by these aspects, we introduced various missing linkers into a layered-pillared MOF Co
(OH)
(C
H
O
) (termed as CoBDC) to prepare missing-linker MOFs. Transmission electron microscope and synchrotron X-ray measurements confirmed that the missing linkers in the MOF could be introduced and well controlled by our strategy. The self-supported MOF nanoarrays with missing linkers of carboxyferrocene exhibit excellent OER performance with ultralow overpotential of 241 mV at 100 mA cm
. This work opens a new prospect to develop efficient MOF-based electrocatalysts by introducing missing linkers.
Lead halide perovskite nanocrystals (NCs) have demonstrated great potential as appealing candidates for advanced optoelectronic applications. However, the toxicity of lead and the intrinsic ...instability toward moisture hinder their mass production and commercialization. Herein, to solve such thorny problems, novel lead‐free Cs2AgBiBr6 double perovskite NCs fabricated via a simple hot‐injection method are reported, which exhibit impressive stability in moisture, light, and temperature. Such materials are then applied into photocatalytic CO2 reduction, achieving a total electron consumption of 105 µmol g−1 under AM 1.5G illumination for 6 h. This study offers a reliable avenue for Cs2AgBiBr6 perovskite nanocrystals preparation, which holds a great potential in the further photochemical applications.
Stable lead‐free Cs2AgBiBr6 double perovskite nanocrystals with a cubic shape and an average size of 9.5 nm are successfully synthesized via the hot‐injection route, and are employed as photocatalysts to convert CO2 into solar fuels (CO and CH4). This work offers a reliable avenue for Cs2AgBiBr6 perovskite nanocrystals preparation, which holds a great potential in the further photochemical applications.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Recent developments in three-dimensional printing (3DP) have attracted the attention of analytical scientists interested in fabricating 3D devices having promising geometric functions to achieve ...desirable analytical performance. To break through the barrier of limited availability of 3DP materials and to extend the chemical reactivity and functionalities of devices manufactured using conventional 3DP, new approaches are being developed for the functionalization of 3D-printed devices for chemical and biochemical analysis. This Review discusses recent advances in the chemical functionalization schemes used in the main 3DP technologies, including (i) post-printing modification and surface immobilization of reactive substances on printed materials, (ii) pre-printing incorporation of reactive substances into raw printing materials, and (iii) combinations of both strategies, and their effects on the selectivity and/or sensitivity of related analytical methods. In addition, the state of the art of 3D-printed functionalized analytical devices for enzymatic derivatization and sensing, electrochemical sensing, and sample pretreatment applications are also reviewed, highlighting the importance of introducing new functional and functionalized materials to facilitate future 3DP-enabled manufacturing of multifunctional analytical devices.
Display omitted
•New approaches are being developed to chemically functionalize 3D-printed devices.•Major schemes are post-printing immobilization and pre-printing incorporation.•D-printed devices functionalized for chemical and biochemical analysis are included.•Enzymatic sensing, electrochemical sensing, and sample pretreatment are reviewed.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The design of white‐light phosphors is attractive in solid‐state lighting (SSL) and related fields. A new strategy in obtaining white light emission (WLE) from dual‐way photon energy conversion in a ...series of dye@MOF (LIFM‐WZ‐6) systems is presented. Besides the traditional UV‐excited one‐photon absorption (OPA) pathway, white‐light modulation can also be gained from the combination of NIR‐excited green and red emissions of MOF backbone and encapsulated dyes via two‐photon absorption (TPA) pathway. As a result, down‐conversion OPA white light was obtained for RhB+@LIFM‐WZ‐6 (0.1 wt %), BR‐2+@LIFM‐WZ‐6 (2 wt %), and APFG+@LIFM‐WZ‐6 (0.1 wt %) samples under 365 nm excitation. RhB+@LIFM‐WZ‐6 (0.05 wt %), BR‐2+@LIFM‐WZ‐6 (1 wt %) and APFG+@LIFM‐WZ‐6 (0.05 wt %) exhibit up‐conversion TPA white light under the excitation of 800, 790, and 730 nm, respectively. This new WLE generation strategy combines different photon energy conversion mechanisms together.
White‐light emission (WLE) was obtained in dye@MOFs. Besides the traditional UV‐excited one‐photon absorption (OPA) pathway, modulation can also be gained from the combination of NIR‐excited green and red emissions of the MOF backbone and encapsulated dyes via a two‐photon absorption (TPA) pathway.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Display omitted
► Two general classes of metallogels developed including molecular metallogels and coordination polymer gels. ► Coordination polymer gelators developed assisted by auxiliary moieties. ...► Metal-organic gelators developed lacking auxiliary moieties. ► Metal-organic gels with novel properties in adsorption, catalysis and as templates for porous materials.
The design of metallogelators and incorporation of metals into supramolecular gels have received growing attention. Design strategies have been developed based on organogelators, including the incorporation of metal into low molecular weight organogelators (LMWGs), and coordination polymers assisted by auxiliary moieties (including lipophilic and hydrogen-bonding groups) as gelators. Additionally, a novel class of metal-organic gels lacking auxiliary moieties has recently been developed; these coordination-directed (induced) gels display novel properties e.g., in adsorption and catalysis and as templates for porous materials. This review highlights the design and properties of a diverse range of metallogelator types.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
•Assembling strategies and applications of chiral MOCs were reviewed in a unique perspective.•Three types of spatial-direction strategies for chiral MOCs were addressed.•Special chiral behaviors and ...applications for stereogenic MOCs were presented.
During the past few decades, great efforts have been devoted to the design and self-assembly of discrete metal–organic cages/containers (MOCs) with increasing complexity and functionality. Among which, the incorporation of chirality into the construction of MOCs endows these supramolecular containers with unique potentials in stereochemical, nonlinear optical, biomedical and enzyme mimical fields. In this review, we give a brief survey of recent works focusing on the assembly and applications of chiral metal–organic convex polyhedra with well-defined three-dimensional (3D) outer shapes and inner cavities, including a few examples of chiral MOCs in other configurations. In general, the stereochemical origin of a chiral MOC can be generated through geometrical symmetry control pathways by removing the inherent inversion and/or mirror symmetries, in which the vertice-, edge-, and face-directed assembling approaches represent the most successful strategies to introduce stereogenic centers into and achieve absolute chiral environments in MOCs. Stereochemical memory, transfer and communication can be realized among different components of chiral MOCs in a supramolecular sense, resulting in cooperative and synergetic effects of chiral complex systems, which can be further explored for enantio-recognition, separation and asymmetric catalysis applications.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Herein, a dynamic spacer installation (DSI) strategy has been implemented to construct a series of multifunctional metal—organic frameworks (MOFs), LIFM‐61/31/62/63, with optimized pore space and ...pore environment for ethane/ethylene separation. In this respect, a series of linear dicarboxylic acids were deliberately installed in the prototype MOF, LIFM‐28, leading to a dramatically increased pore volume (from 0.41 to 0.82 cm3 g−1) and reduced pore size (from 11.1×11.1 Å2 to 5.6×5.6 Å2). The increased pore volume endows the multifunctional MOFs with much higher ethane adsorption capacity, especially for LIFM‐63 (4.8 mmol g−1), representing nearly three times as much ethane as the prototypical counterpart (1.7 mmol g−1) at 273 K and 1 bar. Meanwhile, the reduced pore size imparts enhanced ethane/ethylene selectivity of the multifunctional MOFs. Theoretical calculations and dynamic breakthrough experiments confirm that the DSI is a promising approach for the rational design of multifunctional MOFs for this challenging task.
A dynamic spacer installation (DSI) strategy has been developed to realize a series of multifunctional metal—organic frameworks (MOFs) with optimized pore space and pore environment for ethane/ethylene separation. The installation of functional spacers into the proto‐LIFM‐28 not only improves the pore volume, but also reduces the pore size, leading to enhanced C2H6/C2H4 separation performance.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
PDF
