At the atomic-cluster scale, pure boron is markedly similar to carbon, forming simple planar molecules and cage-like fullerenes. Theoretical studies predict that two-dimensional (2D) boron sheets ...will adopt an atomic configuration similar to that of boron atomic clusters. We synthesized atomically thin, crystalline 2D boron sheets (i.e., borophene) on silver surfaces under ultrahigh-vacuum conditions. Atomic-scale characterization, supported by theoretical calculations, revealed structures reminiscent of fused boron clusters with multiple scales of anisotropic, out-of-plane buckling. Unlike bulk boron allotropes, borophene shows metallic characteristics that are consistent with predictions of a highly anisotropic, 2D metal.
Full text
Available for:
BFBNIB, NMLJ, NUK, ODKLJ, PNG, SAZU, UL, UM, UPUK
Functionalization of atomically thin nanomaterials enables the tailoring of their chemical, optical and electronic properties. Exfoliated black phosphorus (BP)-a layered two-dimensional ...semiconductor-exhibits favourable charge-carrier mobility, tunable bandgap and highly anisotropic properties, but it is chemically reactive and degrades rapidly in ambient conditions. Here we show that covalent aryl diazonium functionalization suppresses the chemical degradation of exfoliated BP even after three weeks of ambient exposure. This chemical modification scheme spontaneously forms phosphorus-carbon bonds, has a reaction rate sensitive to the aryl diazonium substituent and alters the electronic properties of exfoliated BP, ultimately yielding a strong, tunable p-type doping that simultaneously improves the field-effect transistor mobility and on/off current ratio. This chemical functionalization pathway controllably modifies the properties of exfoliated BP, and thus improves its prospects for nanoelectronic applications.
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs) and black phosphorus (BP) have beneficial electronic, optical, and physical properties at the few-layer limit. As ...atomically thin materials, 2D TMDCs and BP are highly sensitive to their environment and chemical modification, resulting in a strong dependence of their properties on substrate effects, intrinsic defects, and extrinsic adsorbates. Furthermore, the integration of 2D semiconductors into electronic and optoelectronic devices introduces unique challenges at metal–semiconductor and dielectric–semiconductor interfaces. Here, we review emerging efforts to understand and exploit chemical effects to influence the properties of 2D TMDCs and BP. In some cases, surface chemistry leads to significant degradation, thus necessitating the development of robust passivation schemes. On the other hand, appropriately designed chemical modification can be used to beneficially tailor electronic properties, such as controlling doping levels and charge carrier concentrations. Overall, chemical methods allow substantial tunability of the properties of 2D TMDCs and BP, thereby enabling significant future opportunities to optimize performance for device applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
The anisotropic thermal conductivity of passivated black phosphorus (BP), a reactive two‐dimensional material with strong in‐plane anisotropy, is ascertained. The room‐temperature thermal ...conductivity for three crystalline axes of exfoliated BP is measured by time‐domain thermoreflectance. The thermal conductivity along the zigzag direction is ≈2.5 times higher than that of the armchair direction.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Solution dispersions of two-dimensional (2D) black phosphorus (BP)often referred to as phosphoreneare achieved by solvent exfoliation. These pristine, electronic-grade BP dispersions are produced ...with anhydrous organic solvents in a sealed-tip ultrasonication system, which circumvents BP degradation that would otherwise occur via solvated O2 or H2O. Among conventional solvents, N-methylpyrrolidone (NMP) is found to provide stable, highly concentrated (∼0.4 mg/mL) BP dispersions. Atomic force microscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy show that the structure and chemistry of solvent-exfoliated BP nanosheets are comparable to mechanically exfoliated BP flakes. Additionally, residual NMP from the liquid-phase processing suppresses the rate of BP oxidation in ambient conditions. Solvent-exfoliated BP nanosheet field-effect transistors exhibit ambipolar behavior with current on/off ratios and mobilities up to ∼104 and ∼50 cm2 V–1 s–1, respectively. Overall, this study shows that stable, highly concentrated, electronic-grade 2D BP dispersions can be realized by scalable solvent exfoliation, thereby presenting opportunities for large-area, high-performance BP device applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission ...electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecyltrichlorosilane self-assembled monolayers and on H-Si(111) versus hydrophilic SiO2. For unencapsulated BP field-effect transistors, the ambient degradation causes large increases in threshold voltage after 6 h in ambient, followed by a ∼103 decrease in FET current on/off ratio and mobility after 48 h. Atomic layer deposited AlO x overlayers effectively suppress ambient degradation, allowing encapsulated BP FETs to maintain high on/off ratios of ∼103 and mobilities of ∼100 cm2 V–1 s–1 for over 2 weeks in ambient conditions. This work shows that the ambient degradation of BP can be managed effectively when the flakes are sufficiently passivated. In turn, our strategy for enhancing BP environmental stability will accelerate efforts to implement BP in electronic and optoelectronic applications.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Anaphylaxis to vaccines is historically a rare event. The coronavirus disease 2019 pandemic drove the need for rapid vaccine production applying a novel antigen delivery system: messenger RNA ...vaccines packaged in lipid nanoparticles. Unexpectedly, public vaccine administration led to a small number of severe allergic reactions, with resultant substantial public concern, especially within atopic individuals. We reviewed the constituents of the messenger RNA lipid nanoparticle vaccine and considered several contributors to these reactions: (1) contact system activation by nucleic acid, (2) complement recognition of the vaccine-activating allergic effector cells, (3) preexisting antibody recognition of polyethylene glycol, a lipid nanoparticle surface hydrophilic polymer, and (4) direct mast cell activation, coupled with potential genetic or environmental predispositions to hypersensitivity. Unfortunately, measurement of anti–polyethylene glycol antibodies in vitro is not clinically available, and the predictive value of skin testing to polyethylene glycol components as a coronavirus disease 2019 messenger RNA vaccine-specific anaphylaxis marker is unknown. Even less is known regarding the applicability of vaccine use for testing (in vitro/vivo) to ascertain pathogenesis or predict reactivity risk. Expedient and thorough research-based evaluation of patients who have suffered anaphylactic vaccine reactions and prospective clinical trials in putative at-risk individuals are needed to address these concerns during a public health crisis.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
With a semiconducting band gap and high charge carrier mobility, two-dimensional (2D) black phosphorus (BP)often referred to as phosphoreneholds significant promise for next generation electronics ...and optoelectronics. However, as a 2D material, it possesses a higher surface area to volume ratio than bulk BP, suggesting that its chemical and thermal stability will be modified. Herein, an atomic-scale microscopic and spectroscopic study is performed to characterize the thermal degradation of mechanically exfoliated 2D BP. From in situ scanning/transmission electron microscopy, decomposition of 2D BP is observed to occur at ∼400 °C in vacuum, in contrast to the 550 °C bulk BP sublimation temperature. This decomposition initiates via eye-shaped cracks along the 001 direction and then continues until only a thin, amorphous red phosphorus like skeleton remains. In situ electron energy loss spectroscopy, energy-dispersive X-ray spectroscopy, and energy-loss near-edge structure changes provide quantitative insight into this chemical transformation process.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Exfoliation of single-layer graphene from bulk graphite and the subsequent discovery of exotic physics and emergent phenomena in the atomically thin limit has motivated the isolation of other ...two-dimensional (2D) layered nanomaterials. Early work on isolated 2D nanomaterial flakes has revealed a broad range of unique physical and chemical properties with potential utility in diverse applications. For example, the electronic and optical properties of 2D nanomaterials depend strongly on atomic-scale variations in thickness, enabling enhanced performance in optoelectronic technologies such as light emitters, photodetectors, and photovoltaics. Much of the initial research on 2D nanomaterials has relied on micromechanical exfoliation, which yields high-quality 2D nanomaterial flakes that are suitable for fundamental studies but possesses limited scalability for real-world applications. In an effort to overcome this limitation, solution-processing methods for isolating large quantities of 2D nanomaterials have emerged. Importantly, solution processing results in 2D nanomaterial dispersions that are amenable to roll-to-roll fabrication methods that underlie lost-cost manufacturing of thin-film transistors, transparent conductors, energy storage devices, and solar cells. Despite these advantages, solution-based exfoliation methods typically lack control over the lateral size and thickness of the resulting 2D nanomaterial flakes, resulting in polydisperse dispersions with heterogeneous properties. Therefore, post-exfoliation separation techniques are needed to achieve 2D nanomaterial dispersions with monodispersity in lateral size, thickness, and properties. In this Account, we survey the latest developments in solution-based separation methods that aim to produce monodisperse dispersions and thin films of emerging 2D nanomaterials such as graphene, boron nitride, transition metal dichalcogenides, and black phosphorus. First, we motivate the need for precise thickness control in 2D nanomaterials by reviewing thickness-dependent physical properties. Then we present a succinct survey of solution-based exfoliation methods that yield 2D nanomaterial dispersions in organic solvents and aqueous media. The Account subsequently focuses on separation methods, including a critical analysis of their relative strengths and weaknesses for 2D nanomaterials with different buoyant densities, van der Waals interactions, and chemical reactivities. Specifically, we evaluate sedimentation-based density gradient ultracentrifugation (sDGU) and isopycnic DGU (iDGU) for post-exfoliation 2D nanomaterial dispersion separation. The comparative advantages of sedimentation and isopycnic methods are presented in both aqueous and nonaqueous media for 2D nanomaterials with varying degrees of chemical reactivity. Finally, we survey methods for forming homogeneous thin films from 2D nanomaterial dispersions and emerging technologies that are likely to benefit from these structures. Overall, this Account provides not only an overview of the present state-of-the-art but also a forward-looking vision for the field of solution-processed monodisperse 2D nanomaterials.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
ReS2 represents a different class of 2D materials, which is characterized by low symmetry having 1D metallic chains within the planes and extremely weak interlayer bonding. Here, the thermal ...conductivity of single‐crystalline ReS2 in a distorted 1T phase is determined at room temperature for the in‐plane directions parallel and perpendicular to the Re‐chains, and the through‐plane direction using time‐domain thermoreflectance. ReS2 is prepared in the form of flakes having thicknesses of 60–450 nm by micromechanical exfoliation, and their crystalline orientations are identified by polarized Raman spectroscopy. The in‐plane thermal conductivity is higher along the Re‐chains, (70 ± 18) W m−1 K−1, as compared to transverse to the chains, (50 ± 13) W m−1 K−1. As expected from the weak interlayer bonding, the through‐plane thermal conductivity is the lowest observed to date for 2D materials, (0.55 ± 0.07) W m−1 K−1, resulting in a remarkably high anisotropy of (130 ± 40) and (90 ± 30) for the two in‐plane directions. The thermal conductivity and interface thermal conductance of ReS2 are discussed relative to the other 2D materials.
The 3D thermal‐conductivity tensor of ReS2, a transition‐metal dichalcogenide with Re‐chains on the plane, is determined using time‐domain thermoreflectance. The thermal conductivity is higher along the Re‐chains, 70 W m−1 K−1, compared to transverse to the chains, 50 W m−1 K−1. The through‐plane thermal conductivity is the lowest observed for 2D materials, 0.55 W m−1 K−1.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK