The addition of intumescent flame retardant to PLA can greatly improve the flame retardancy of the material and inhibit the dripping, but the major drawback is the adverse impact of the mechanical ...properties of the material. In this study, we found that the flame retardant and mechanical properties of the materials can be improved simultaneously by constructing a cross-linked structure. Firstly, a cross-linking flame-retardant PLA structure was designed by adding 0.9 wt% DCP and 0.3 wt% TAIC. After that, different characterization methods including torque, melt flow rate, molecular weight and gel content were used to clarify the formation of crosslinking structures. Results showed that the torque of 0.9DCP/0.3TAIC/FRPLA increased by 307% and the melt flow rate decreased by 77.8%. The gel content of 0.9DCP/0.3TAIC/FRPLA was 30.8%, indicating the formation of cross-linked structures. Then, the mechanical properties and flame retardant performance were studied. Results showed that, compared with FRPLA, the tensile strength, elongation at break and impact strength of 0.9DCP/0.3TAIC/FRPLA increased by 34.8%, 82.6% and 42.9%, respectively. The flame retardancy test results showed that 0.9DCP/0.3TAIC/FRPLA had a very high LOI (the limiting oxygen index) value of 39.2% and passed the UL94 V-0 level without dripping. Finally, the crosslinking reaction mechanism, flame retardant mechanism and the reasons for the improvement of mechanical properties were studied and described.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
Salt-induced kinase 1 (SIK1) acts as a key modulator in many physiological processes. However, the effects of SIK1 on gluconeogenesis and the underlying mechanisms have not been fully elucidated. In ...this study, we found that a natural compound phanginin A could activate SIK1 and further inhibit gluconeogenesis. The mechanisms by which phanginin A activates SIK1 and inhibits gluconeogenesis were explored in primary mouse hepatocytes, and the effects of phanginin A on glucose homeostasis were investigated in ob/ob mice.
The effects of phanginin A on gluconeogenesis and SIK1 phosphorylation were examined in primary mouse hepatocytes. Pan-SIK inhibitor and siRNA-mediated knockdown were used to elucidate the involvement of SIK1 activation in phanginin A-reduced gluconeogenesis. LKB1 knockdown was used to explore how phanginin A activated SIK1. SIK1 overexpression was used to evaluate its effect on gluconeogenesis, PDE4 activity, and the cAMP pathway. The acute and chronic effects of phanginin A on metabolic abnormalities were observed in ob/ob mice.
Phanginin A significantly increased SIK1 phosphorylation through LKB1 and further suppressed gluconeogenesis by increasing PDE4 activity and inhibiting the cAMP/PKA/CREB pathway in primary mouse hepatocytes, and this effect was blocked by pan-SIK inhibitor HG-9-91-01 or siRNA-mediated knockdown of SIK1. Overexpression of SIK1 in hepatocytes increased PDE4 activity, reduced cAMP accumulation, and thereby inhibited gluconeogenesis. Acute treatment with phanginin A reduced gluconeogenesis in vivo, accompanied by increased SIK1 phosphorylation and PDE4 activity in the liver. Long-term treatment of phanginin A profoundly reduced blood glucose levels and improved glucose tolerance and dyslipidemia in ob/ob mice.
We discovered an unrecognized effect of phanginin A in suppressing hepatic gluconeogenesis and revealed a novel mechanism that activation of SIK1 by phanginin A could inhibit gluconeogenesis by increasing PDE4 activity and suppressing the cAMP/PKA/CREB pathway in the liver. We also highlighted the potential value of phanginin A as a lead compound for treating type 2 diabetes.
•Phanginin A inhibits gluconeogenesis in primary mouse hepatocytes.•Phanginin A increases hepatic SIK1 phosphorylation both in vitro and in vivo.•Activation of SIK1 increases PDE4 activity and suppresses the cAMP signaling pathway.•Activation of SIK1 inhibits gluconeogenesis by regulating the PDE4/cAMP/PKA/CREB pathway.•Phanginin A improves metabolic disorders in ob/ob mice.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
•For the first time chufa peels were researched for its flavonoids profile.•Twenty flavonoids included six new ones were isolated and identified from it.•Chufa peels can be regarded as an excellent ...source of natural antioxidants.•Chufa peels should be a good additive in the beverage and canning.
In this paper, chufa peels (Eleocharis tuberosa) were researched for the flavonoid profile for the first time. Twenty flavonoids were isolated and identified, including six new ones, named eleocharins A–F (1–6). Their structures were characterised by spectroscopic methods and compared with published data. The antioxidant activity of the acetone extract, EtOAc fraction, and nBuOH fraction of chufa peels as well as the isolated flavonoids were assessed by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical bioassay. The results showed that chufa peels can be regarded as an excellent source of natural antioxidants (mainly flavonoids) and a good additive in the beverage and canning.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
A series of flame‐retardant polycarbonate (PC) composites with different ratios of phosphazene‐triazine bi‐group flame retardant (A3) were prepared. The flame retardant performance and thermal ...stability of PC/A3 composites were characterized by LOI, UL 94 vertical burning test, cone calorimetry test and TG. Results show that when the addition of A3 is 13.5%, the PC/A3 composite can pass UL94 V‐0 level with a LOI value of 29.3% and reduce the peak heat release rate by 47.5% during the combustion. TG results show that adding 5% A3 can increase the initial decomposition temperature of the PC by 7°C in nitrogen and 9°C in air. Investigation of the morphology and chemical structure of char residue demonstrates that A3 promotes the formation of more complete and compact char residue which acts as physical barriers to inhibit the transfer of heat and oxygen, resulting the good flame retardant properties. The analysis of gaseous pyrolysis product reveals that A3 also exerts a flame‐retardant effect in gas phase by releasing PO· free radicals.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
The flame‐retardant rigid polyurethane foams (RPUF) were prepared by using modified ammonium polyphosphate (MAPP) combined with expandable graphite (EG) and dimethyl methylphosphonate (DMMP). The ...thermal stability, flame retardant property, and mechanical property of flame‐retardant RPUF were evaluated based on thermogravimetric analysis (TGA), limiting oxygen index (LOI) test, cone calorimetry tests, scanning electron microscopy (SEM) and compressive strength tests. The results showed that an efficient ternary flame retardant system, DMMP/EG/MAPP, for rigid polyurethane foam was constructed. When the ratio of DMMP/EG/MAPP was 4/12/4, the cell size of RPUF composite was the most homogeneous, and the LOI value of RPUF composite reached 31.9%. The peak heat release and total smoke release value decreased to 97 kW/m2 and 347 m2/m2, respectively. The RPUF composites with 4%DMMP/12%EG/4%MAPP exhibited the best flame retardant property because DMMP/EG/MAPP played great free radical quenching effect in the gas phase by releasing the PO· and PO2· free radicals during the whole combustion process. Meanwhile, the compact char layer with “connected worm‐like” structure exerted barrier effect in the condensed phase.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
•Nano ZnO improves fire retardant property and destroys mechanical property of PLA.•Nano ZnO catalyzes decomposition of PLA into short chains as carbon source.•The catalytic effect of nano ZnO is ...suppressed by covering its surface.•A4-d-ZnO allows reaching a balance between fire and mechanical properties.
Nano zinc oxide (nano ZnO) and phosphazene/triazine bi-group flame retardant in situ doping nano zinc oxide (A4-d-ZnO) were used as synergists in intumescent flame retardant poly (lactic acid) (PLA) composites, respectively. The results showed that nano ZnO endowed flame retardant PLA excellent flame retardant properties, such as the higher LOI value, the lower pk-HRR, av-HRR, THR, mass loss rate, TSR and more final mass than A4-d-ZnO. It was because that nano ZnO catalyzed PLA decomposed into low molecular segments, which acted as a char-forming agent. However, it destroyed the mechanical properties seriously. By contrast, although the flame retardant properties of PLA/IFR/A4-d-ZnO was not better than PLA/IFR/nano ZnO, owing to the weakened catalytic effect of A4-d-ZnO coated by the phosphazene/triazine bi-group flame retardant, A4-d-ZnO improved the flame retardant properties, the thermal stability and the mechanical properties at the same time, which was important and necessary for application.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The flame‐retardant rigid polyurethane foams (RPUFs) with dimethyl methylphosphonate (DMMP) and modified ammonium polyphosphate (MAPP) were prepared. The results showed that the limiting oxygen index ...(LOI) value was improved by adding DMMP into RPUF/MAPP composite; 10 wt% of DMMP addition can increase the LOI value from 24.3% to 26.0%, where the commercial application standard of RPUF is achieved. Further benefits of using DMMP/MAPP system included restraining of total heat and smoke release, improvement of thermal stability, and char yield of RPUF. The thermogravimetric analysis (TGA)‐gas chromatography‐mass spectrometer (GC‐MS) results indicated that DMMP/MAPP could continuously release PO2 and PO·free radicals in the gas phase. In addition, DMMP/MAPP exhibited the charring effect and barrier effect in the condensed phase, such bi‐flame retardant effect exerted by DMMP/MAPP resulted in the enhanced flame retardant property of RPUF.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
Different proportion of nano zinc oxide (nano ZnO) and chain extender (ADR) were combined with the intumescent flame retardant and then added into the PLA matrix. The thermal stability, flame ...retardant performance, and mechanical properties were studied. The gel content results showed that crosslinking structures were obtained after the addition of nano ZnO and ADR, which were generated by the catalytic chain scission effect of nano ZnO and chain extension effect of ADR. With addition of 1% nano ZnO and 1.6% ADR, the gel content of flame retardant PLA composite reached the highest value (14.2%). Meanwhile, the corresponding flame retardant PLA composite with 1% nano ZnO and 1.6% ADR, named FRPLA/ZnO/ADR‐1, exhibited an overall improved properties including the flame retardant properties and mechanical performance, which passed the UL94 V‐0 level with a limiting oxygen index value of 40.1%. Compared to FRPLA (flame retardant PLA without ZnO and ADR), the peak heat release rate and the total smoke production of FRPLA/ZnO/ADR‐1were reduced by 60% and 67% respectively, and the final mass improved from 12% to 38%. In addition, the tensile strength and elongation at break of FRPLA/ZnO/ADR‐1 increased by 25%, 14% compared with that of FRPLA. The impact strength was 15.1 kJ/m2, which is similar to the pure PLA (15.6 kJ/m2). It indicated that the addition of nano ZnO and ADR could balance the flame retardant performance and the mechanical properties of the flame retardant PLA.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK
A novel polyphosphazene/triazine bi‐group flame retardant in situ doping nano ZnO (A4‐d‐ZnO) was synthesized and applied in poly (lactic acid) (PLA). Fourier transform infrared (FTIR), solid state ...nuclear magnetic resonance (SSNMR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM), and energy dispersive spectrometer (EDS) were used to confirm the chemical structure of A4‐d‐ZnO. The thermal stability and the flame‐retardant properties of the PLA composites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), limiting oxygen index (LOI), vertical burning test (UL‐94), and micro combustion calorimeter (MCC) test. The results of XPS showed that A4‐d‐ZnO has been synthesized, and the doping ratio of ZnO was 7.2% in flame‐retardant A4‐d‐ZnO. TGA results revealed that A4‐d‐ZnO had good char forming ability (40 wt% at 600°C). The results of LOI, vertical burning test, and MCC showed that PLA/5%A4‐d‐ZnO composite acquired a higher LOI value (24%), higher UL94 rating, and lower pk‐HRR (501 kW/m2) comparing with that of pure PLA. It indicated that a small amount of flame‐retardant A4‐d‐ZnO could achieve great flame‐retardant performance in PLA composites. The catalytic chain scission effect of A4‐d‐ZnO could make PLA composites drip with flame and go out during combustion, which was the reason for the good flame‐retardant property. Moreover, after the addition of A4‐d‐ZnO, the impaired mechanical properties of PLA composites are minimal enough.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SAZU, SBCE, SBMB, UL, UM, UPUK