Genome-editing technologies based on programmable nucleases have significantly broadened our ability to make precise and direct changes in the genomic DNA of various species, including human cells. ...Delivery of programmable nucleases into the target tissue or cell is one of the pressing challenges in transforming the technology into medicine. In vitro-transcribed (IVT) mRNA-mediated delivery of nucleases has several advantages, such as transient expression with efficient in vivo and in vitro delivery, no genomic integration, a potentially low off-target rate, and high editing efficiency. This review focuses on key barriers related to IVT mRNA delivery, on developed modes of delivery, and on the application and future prospects of mRNA encoding nuclease-mediated genome editing in research and clinical trials.
In vitro-transcribed (IVT) mRNA mediates the delivery of genome-editing nucleases. Zhang et al. review key barriers related to IVT mRNA delivery, developed modes of delivery, and the application and future prospects of mRNA encoding nuclease-mediated genome editing in research and clinical trials.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The renewable‐electricity‐driven CO2 reduction to formic acid would contribute to establishing a carbon‐neutral society. The current catalyst suffers from limited activity and stability under high ...selectivity and the ambiguous nature of active sites. Herein, we report a powerful Bi2S3‐derived catalyst that demonstrates a current density of 2.0 A cm−2 with a formate Faradaic efficiency of 93 % at −0.95 V versus the reversible hydrogen electrode. The energy conversion efficiency and single‐pass yield of formate reach 80 % and 67 %, respectively, and the durability reaches 100 h at an industrial‐relevant current density. Pure formic acid with a concentration of 3.5 mol L−1 has been produced continuously. Our operando spectroscopic and theoretical studies reveal the dynamic evolution of the catalyst into a nanocomposite composed of Bi0 clusters and Bi2O2CO3 nanosheets and the pivotal role of Bi0−Bi2O2CO3 interface in CO2 activation and conversion.
An electrocatalyst derived from Bi2S3 is very powerful for the reduction of CO2 to formic acid, achieving a current density of 2.0 A cm−2 with a formate Faradaic efficiency of 93 % and a single‐pass formate yield of 67 %. The active catalyst is composed of Bi nanoclusters on Bi2O2CO3 nanosheets and the interfacial Bi site plays a pivotal role.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Atomically dispersed oxide‐on‐metal inverse nanocatalysts provide a blueprint to amplify the strong oxide–metal interactions for heterocatalysis but remain a grand challenge in fabrication. Here we ...report a 2D inverse nanocatalyst, RuOx‐on‐Pd nanosheets, by in situ creating atomically dispersed RuOx/Pd interfaces densely on ultrathin Pd nanosheets via a one‐pot synthesis. The product displays unexpected performance toward the oxygen reduction reaction (ORR) in alkaline medium, which represents 8.0‐ and 22.4‐fold enhancement in mass activity compared to the state‐of‐the‐art Pt/C and Pd/C catalysts, respectively, showcasing an excellent Pt‐alternative cathode electrocatalyst for fuel cells and metal–air batteries. Density functional theory calculations validate that the RuOx/Pd interface can accumulate partial charge from the 2D Pd host and subtly change the adsorption configuration of O2 to facilitate the O−O bond cleavage. Meanwhile, the d‐band center of Pd nanosubstrates is effectively downshifted, realizing weakened oxygen binding strength.
An atomically dispersed RuOx‐on‐Pd ultrathin 2D inverse nanocatalyst with amplified oxide/metal interface effects may serve as an excellent Pt‐alternative cathode electrocatalyst for fuel cells and metal–air batteries.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Fundamental understanding of the dependence between the structure and composition on the electrochemical CO2 reduction reaction (CO2RR) would guide the rational design of highly efficient and ...selective electrocatalysts. A major impediment to the deep reduction CO2 to multi‐carbon products is the complexity of carbon–carbon bond coupling. The chemically well‐defined catalysts with atomically dispersed dual‐metal sites are required for these C−C coupling involved processes. Here, we developed a catalyst (BIF‐102NSs) that features Cl− bridged dimer copper (Cu2) units, which delivers high catalytic activity and selectivity for C2H4. Mechanistic investigation verifies that neighboring Cu monomers not only perform as regulator for varying the reaction barrier, but also afford distinct reaction paths compared with isolated monomers, resulting in greatly improved electroreduction performance for CO2.
Chemically well‐defined catalysts with atomically dispersed dimer‐copper sites are elaborated to modulate the reaction path of CO2 electroreduction reaction (CO2RR). The BIF‐102NSs catalyst with Cl− bridged dimer copper (Cu2) units shows higher catalytic activity and selectivity for C2H4, because the neighboring Cu monomers perform as regulator for varying the reaction barrier and afford distinct reaction paths compared with isolated monomers.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Photocatalytic reduction of CO2 to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to ...maximumly expose the active sites is the key to activate CO2 molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO2. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO2 to CO with an evolution rate of 3334 μmol g−1 h−1 and a high selectivity of 82.6 %.
The cat on the cage: A copper‐based boron imidazolate cage with isolated, coordinatively unsaturated single copper atom active sites was found to be as an excellent co‐catalyst for highly efficient and selective solar‐driven CO2 reduction to CO.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Background
The clinical characteristics of novel coronavirus disease (COVID‐2019) patients outside the epicenter of Hubei Province are less understood.
Methods
We analyzed the epidemiological and ...clinical features of all COVID‐2019 cases in the only referral hospital in Shenzhen City, China, from January 11, 2020, to February 6, 2020, and followed until March 6, 2020.
Results
Among the 298 confirmed cases, 233 (81.5%) had been to Hubei, while 42 (14%) did not have a clear travel history. Only 218 (73.15%) cases had a fever as the initial symptom. Compared with the nonsevere cases, severe cases were associated with older age, those with underlying diseases, and higher levels of C‐reactive protein, interleukin‐6, and erythrocyte sedimentation rate. Slower clearance of the virus was associated with a higher risk of progression to critical condition. As of March 6, 2020, 268 (89.9%) patients were discharged and the overall case fatality ratio was 1.0%.
Conclusions
In a designated hospital outside Hubei Province, COVID‐2019 patients could be effectively managed by properly using the existing hospital system. Mortality may be lowered when cases are relatively mild, and there are sufficient medical resources to care and treat the disease.
This study analyzes the epidemiological and clinical features of all 298 COVID‐19 cases in the only referral hospital of Shenzhen City. Slower clearance of virus is associated with a higher progression to severe critical condition. Compared with the nonsevere cases, severe cases are associated with older age, underlying diseases, higher levels of C‐reactive protein, interleukin‐6, and erythrocyte sedimentation rate. Abbreviations: CRP, C‐reactive protein; ESR, erythrocyte sedimentation rate.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Covalent organic frameworks (COF) possess a robust and porous crystalline structure, making them an appealing candidate for energy storage. Herein, we report an exfoliated polyimide COF composite ...(P‐COF@SWCNT) prepared by an in situ condensation of anhydride and amine on the single‐walled carbon nanotubes as advanced anode for potassium‐ion batteries (PIBs). Numerous active sites exposed on the exfoliated frameworks and the various open pathways promote the highly efficient ion diffusion in the P‐COF@SWCNT while preventing irreversible dissolution in the electrolyte. During the charging/discharging process, K+ is engaged in the carbonyls of imide group and naphthalene rings through the enolization and π‐K+ effect, which is demonstrated by the DFT calculation and XPS, ex‐situ FTIR, Raman. As a result, the prepared P‐COF@SWCNT anode enables an incredibly high reversible specific capacity of 438 mA h g−1 at 0.05 A g−1 and extended stability. The structural advantage of P‐COF@SWCNT enables more insights into the design and versatility of COF as an electrode.
We prepare a polyimide covalent organic framework composite anode by effective in‐situ condensation of anhydride and amine on the surface of single‐walled carbon nanotubes. The construction of the conductive network accelerates the transport of electron. Dual electroactive sites in the framework, carbonyls and aromatic naphthalene rings, could store more potassium ions by the enolization and π‐K+ effect.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Abstract
Background
The triglyceride-glucose index (TyG index) has been regarded as a reliable alternative marker of insulin resistance and an independent predictor of cardiovascular outcomes. ...Whether the TyG index predicts adverse cardiovascular events in patients with diabetes and acute coronary syndrome (ACS) remains uncertain. The aim of this study was to investigate the prognostic value of the TyG index in patients with diabetes and ACS.
Methods
A total of 2531 consecutive patients with diabetes who underwent coronary angiography for ACS were enrolled in this study. Patients were divided into tertiles according to their TyG index. The primary outcomes included the occurrence of major adverse cardiovascular events (MACEs), defined as all-cause death, non-fatal myocardial infarction and non-fatal stroke. The TyG index was calculated as the ln (fasting triglyceride level mg/dL × fasting glucose level mg/dL/2).
Results
The incidence of MACE increased with TyG index tertiles at a 3-year follow-up. The Kaplan–Meier curves showed significant differences in event-free survival rates among TyG index tertiles (P = 0.005). Multivariate Cox hazards regression analysis revealed that the TyG index was an independent predictor of MACE (95% CI 1.201–1.746; P < 0.001). The optimal TyG index cut-off for predicting MACE was 9.323 (sensitivity 46.0%; specificity 63.6%; area under the curve 0.560; P = 0.001). Furthermore, adding the TyG index to the prognostic model for MACE improved the C-statistic value (P = 0.010), the integrated discrimination improvement value (P = 0.001) and the net reclassification improvement value (P = 0.019).
Conclusions
The TyG index predicts future MACE in patients with diabetes and ACS independently of known cardiovascular risk factors, suggesting that the TyG index may be a useful marker for risk stratification and prognosis in patients with diabetes and ACS.
Full text
Available for:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Sodium metal anodes are poor due to the reversibility of Na plating/stripping, which hinders their practical applications. A strategy to form a sodiophilic Au–Na alloy interphase on a Cu current ...collector, involving a sputtered Au thin layer, is shown to enable efficient Na plating/stripping for a certain period of time. Herein, electrochemical behaviors of Na plating on different substrates are explored, and it is revealed that the sodiophilic interphase can be achieved universally by in situ formation of M–Na (M = Au, Sn, and Sb) alloys during Na plating prior to Na bulk deposition in the initial cycle. Moreover, it is found that repetitive alloying–dealloying leads to falling‐off of thin film sodiophilic materials and thus limits the lifespan of efficient Na cycling. Therefore, an approach is further developed by employing particles of sodiophilic materials combined with the control over the cutoff potential, which significantly improves the stability of Na plating/stripping process. Especially, the low‐cost Cu@Sn‐NPs and Cu@Sb‐MPs composite current collectors allow Na plating and stripping to cycle for 2000 and 1700 times with the average efficiency of 99.9% at 2 mA cm−2.
Stable Na plating/stripping electrochemical behaviors are achieved by using the in situ formed sodiophilic sodium‐metal (metal = Au, Sn, Sb) alloy interphase. By simultaneous control over the stripping cut‐off potential and employment of anchored metal particles, Na plating/stripping cycling is extended to 2000 times at 2 mA cm−2 with an average Coulombic efficiency of 99.9% on the sodium‐metal alloy‐based interphase.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK