High-energy cosmic-ray electrons and positrons (CREs), which lose energy quickly during their propagation, provide a probe of Galactic high-energy processes and may enable the observation of ...phenomena such as dark-matter particle annihilation or decay. The CRE spectrum has been measured directly up to approximately 2 teraelectronvolts in previous balloon- or space-borne experiments, and indirectly up to approximately 5 teraelectronvolts using ground-based Cherenkov γ-ray telescope arrays. Evidence for a spectral break in the teraelectronvolt energy range has been provided by indirect measurements, although the results were qualified by sizeable systematic uncertainties. Here we report a direct measurement of CREs in the energy range 25 gigaelectronvolts to 4.6 teraelectronvolts by the Dark Matter Particle Explorer (DAMPE) with unprecedentedly high energy resolution and low background. The largest part of the spectrum can be well fitted by a 'smoothly broken power-law' model rather than a single power-law model. The direct detection of a spectral break at about 0.9 teraelectronvolts confirms the evidence found by previous indirect measurements, clarifies the behaviour of the CRE spectrum at energies above 1 teraelectronvolt and sheds light on the physical origin of the sub-teraelectronvolt CREs.
Full text
Available for:
IJS, KISLJ, NUK, SBMB, UL, UM, UPUK
Obesity is considered as a chronic disease that can induce a series of comorbidities and complications. Chinese medicine has long clinical experiences in the treatment of obesity. This review ...summarizes the natural products from traditional Chinese medicine (TCM) that are reported to have anti‐obesity effects in the past two decades. Botanic TCM comprises 90% of total Chinese crude drugs, and generally contains various active ingredients, in which the effective anti‐obesity ingredients identified can be divided into saponins, polysaccharides, alkaloids, polyphenols and others. Astragaloside IV, glycyrrhizin, macrostemonoside A, berberine, betaine, capsaicin, matrine, methyl piperate, piperine, rutaecarpine, asimilobine, epigallocatechingallate, magnolol, resveratrol, soybean‐isoflavone, α‐linolenic acid, emodin, geniposide, phillyrin, salidroside and ursolic acid are specified in this review, and their sources, models, efficacy are described. It is concluded that the mechanisms of these components for the treatment of obesity include: (i) suppression of appetite, increase of satiety, reduction of energy intake; (ii) reduction in the digestion and absorption of exogenous lipid; (iii) attenuation of the synthesis of endogenous lipid; (iv) promotion of the oxidation and expenditure of lipid and (v) improvement of lipid metabolism disorder. Authors believe that the effective compounds from TCM will provide an alternative and hopeful way for the treatment of obesity.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have gained increasingly global attention in recent years. Due to their unique amphiphilic properties and stability, PFASs are recognized as ...highly persistent, toxic, and environmentally bioaccumulative. Among several physicochemical technologies, adsorption has been extensively used and proved to be an effective method for removing PFASs from aqueous environment. In this review article, the technical feasibility of the use of different adsorbents, such as activated carbon, ion exchange resins, minerals, molecularly imprinted polymer (MIP), carbon nanotubes (CNTs), and a wide range of potentially low-cost biosorbents, for PFASs removal from water or wastewater is critically reviewed. The evaluation and comparison of their PFASs sorption behavior in terms of kinetics and isotherms is presented. The mechanisms involved in PFASs adsorption processes, such as diffusion, electrostatic interaction, hydrophobic interaction, ion exchange and hydrogen bond, are discussed. The effects of the parameters variability on sorption process are highlighted. Based on the literature reviewed, a few recommendations for future research on PFASs adsorption are also elaborated.
Capsule: The adsorption behavior and mechanisms of perfluoroalkyl and polyfluoroalkyl substances (PFASs) on various adsorbents are reviewed.
Display omitted
•Resins and CNTs exhibit higher adsorption capacity than other adsorbents.•Biosorbents have great potential for efficient PFAS removal with cost-effectiveness.•Adsorption mechanisms involve electrostatic interaction, hydrophobic interaction and ion exchange.•The environmental parameters can influence PFASs adoption performance.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
ABSTRACT
SN 2018hti is a Type I superluminous supernova (SLSN I) with an absolute g-band magnitude of −22.2 at maximum brightness, discovered by the Asteroid Terrestrial-impact Last Alert System in a ...metal-poor galaxy at a redshift of 0.0612. We present extensive photometric and spectroscopic observations of this supernova, covering the phases from ∼−35 d to more than +340 d from the r-band maximum. Combining our BVgri-band photometry with Swift UVOT optical/ultraviolet photometry, we calculated the peak luminosity as ∼3.5 × 1044 erg s−1. Modelling the observed light curve reveals that the luminosity evolution of SN 2018hti can be produced by an ejecta mass of 5.8 M⊙ and a magnetar with a magnetic field of B = 1.8 × 1013 G having an initial spin period of P0 = 1.8 ms. Based on such a magnetar-powered scenario and a larger sample, a correlation between the spin of the magnetar and the kinetic energy of the ejecta can be inferred for most SLSNe I, suggesting a self-consistent scenario. Like for other SLSNe I, the host galaxy of SN 2018hti is found to be relatively faint (Mg = −17.75 mag) and of low metallicity (Z = 0.3 Z⊙), with a star formation rate of 0.3 M⊙ yr−1. According to simulation results of single-star evolution, SN 2018hti could originate from a massive, metal-poor star with a zero-age main sequence (ZAMS) mass of 25–40 M⊙, or from a less massive rotating star with MZAMS ≈ 16–25 M⊙. For the case of a binary system, its progenitor could also be a star with $M_\mathrm{ZAMS} \gtrsim 25\, \mathrm{ M}_\odot$.
A second-order phase transition in a physical system is associated with the emergence of an "order parameter" and a spontaneous symmetry breaking. The heavy fermion superconductor URu2Si2 has a ..."hidden order" (HO) phase below the temperature of 17.5 kelvin; the symmetry of the associated order parameter has remained ambiguous. Here we use polarization-resolved Raman spectroscopy to specify the symmetry of the low-energy excitations above and below the HO transition. We determine that the HO parameter breaks local vertical and diagonal reflection symmetries at the uranium sites, resulting in crystal field states with distinct chiral properties, which order to a commensurate chirality density wave ground state.
Full text
Available for:
BFBNIB, NMLJ, NUK, PNG, SAZU, UL, UM, UPUK
Many breakthroughs in the laboratories often do not bridge the gap between research and commercialization. However, silicon photonics bucked the trend, with industry observers estimating the ...commercial market to close in on a billion dollars in 2020 <xref ref-type="bibr" rid="ref45">45 . Silicon photonics leverages the billions of dollars and decades of research poured into silicon semiconductor device processing to enable high yield, robust processing, and most of all, low cost. Silicon is also a good optical material, with transparency in the commercially important infrared wavelength bands, and is a suitable platform for large-scale photonic integrated circuits. Silicon photonics is therefore slated to address the world's ever-increasing needs for bandwidth. It is part of an emerging ecosystem which includes designers, foundries, and integrators. In this paper, we review most of the foundries that presently enable silicon photonics integrated circuits fabrication. Some of these are pilot lines of major research institutes, and others are fully commercial pure-play foundries. Since silicon photonics has been commercially active for some years, foundries have released process design kits (PDK) that contain a standard device library. These libraries represent optimized and well-tested photonic elements, whose performance reflects the stability and maturity of the integration platforms. We will document the early works in silicon photonics, as well as its commercial status. We will provide a comprehensive review of the development of silicon photonics and the foundry services which enable the productization, including various efforts to develop and release PDK devices. In this context, we will report the long-standing efforts and contributions that previously IME/A * STAR and now AMF has dedicated to accelerating this journey.
► The focus is simultaneous determination of seven neonicotinoid residues in grains. ► It is a rapid and reliable method that we have developed to analyse seven pesticides. ► It is the first time to ...analyse seven neonicotinoid residues in maize, millet and oat.
A method using dispersive solid-phase extraction and dispersive liquid–liquid micro-extraction cleanup followed by high performance liquid chromatography (HPLC) has been established for determination of seven neonicotinoid insecticides residues in grains including brown rice, maize, millet and oat. Based on an appraisal of the characteristics of HPLC, validation experiments were conducted for seven neonicotinoid insecticides. In the method, dispersive solid-phase extraction was carried out using PSA and bonded C18 coupled with graphitised carbon black with acetonitrile as the eluted solvent. In the linear range of each pesticide, the correlation coefficient was R2⩾0.99. At the low, medium and high three fortification levels of 0.05–0.8mgkg−1, recoveries fell within 76–123%. The relative standard deviation was between 0.9% and 12.6% for seven neonicotinoid pesticides. Low limits of detection (0.002–0.005mgkg−1) and quantification (0.007–0.018mgkg−1) were readily achieved with this method for all tested pesticides.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
HIAF (High Intensity heavy ion Accelerator Facility), a new facility planned in China for heavy ion related researches, consists of two ion sources, a high intensity Heavy Ion Superconducting Linac ...(HISCL), a 45 Tm Accumulation and Booster Ring (ABR-45) and a multifunction storage ring system. The key features of HIAF are unprecedented high pulse beam intensity and versatile operation mode. The HIAF project aims to expand nuclear and related researches into presently unreachable region and give scientists possibilities to conduct cutting-edge researches in these fields. The general description of the facility is given in this article with a focus on the accelerator design.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Phytases are a group of enzymes capable of releasing phosphates from phytates, one of the major forms of phosphorus (P) in animal feeds of plant origin. These enzymes have been widely used in animal ...feed to improve phosphorus nutrition and to reduce phosphorus pollution in animal waste. This review covers the basic nomenclature and crystal structures of phytases and emphasizes both the protein engineering strategies used for the development of new, effective phytases with improved properties and the potential biotechnological applications of phytases.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
PDF
