A macroscopic 3D porous graphitic carbon nitride (g‐CN) monolith is prepared by the one‐step thermal polymerization of urea inside the framework of a commercial melamine sponge and exhibits improved ...photocatalytic water‐splitting performance for hydrogen evolution compared to g‐CN powder due to the 3D porous interconnected network, larger specific surface area, better visible light capture, and superior charge‐separation efficiency.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Electrocatalytic nitrogen reduction reaction (NRR) is a promising strategy for ammonia (NH3) production under ambient conditions. However, it is severely impeded by the challenging activation of the ...NN bond and the competing hydrogen evolution reaction (HER), which makes it crucial to design electrocatalysts rationally for efficient NRR. Herein, the rational design of bismuth (Bi) nanoparticles with different oxidation states embedded in carbon nanosheets (Bi@C) as efficient NRR electrocatalysts is reported. The NRR performance of Bi@C improves with the increase of Bi0/Bi3+ atomic ratios, indicating that the oxidation state of Bi plays a significant role in electrochemical ammonia synthesis. As a result, the Bi@C nanosheets annealed at 900 °C with the optimal oxidation state of Bi demonstrate the best NRR performance with a high NH3 yield rate and remarkable Faradaic efficiency of 15.10 ± 0.43% at −0.4 V versus RHE. Density functional theory calculations reveal that the effective modulation of the oxidation state of Bi can tune the p‐filling of active Bi sites and strengthen adsorption of *NNH, which boost the potential‐determining step and facilitate the electrocatalytic NRR under ambient conditions. This work may offer valuable insights into the rational material design by modulating oxidation states for efficient electrocatalysis.
An oxidation state modulation strategy is proposed to boost nitrogen reduction to ammonia. As a proof‐of‐concept, the surface oxidation of Bi species is tuned with the less occupied p orbital, which leads to stronger adsorption of *NNH and lower ΔG of the potential‐determining step. By optimizing Bi surface oxidation, superior nitrogen reduction reaction performance of Faradaic efficiency of 15.10 ± 0.43% is achieved.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Surfaces and heterojunction interfaces, where defects and energy levels dictate charge‐carrier dynamics in optoelectronic devices, are critical for unlocking the full potential of perovskite ...semiconductors. In this progress report, chemical structures of perovskite surfaces are discussed and basic physical rules for the band alignment are summarized at various perovskite interfaces. Common perovskite surfaces are typically decorated by various compositional and structural defects such as residual surface reactants, discrete nanoclusters, reactions by products, vacancies, interstitials, antisites, etc. Some of these surface species induce deep‐level defect states in the forbidden band forming very harmful charge‐carrier traps and affect negatively the interface band alignments for achieving optimal device performance. Herein, an overview of research progresses on surface and interface engineering is provided to minimize deep‐level defect states. The reviewed subjects include selection of interface and substrate buffer layers for growing better crystals, materials and processing methods for surface passivation, the surface catalyst for microstructure transformations, organic semiconductors for charge extraction or injection, heterojunctions with wide bandgap perovskites or nanocrystals for mitigating defects, and electrode interlayer for preventing interdiffusion and reactions. These surface and interface engineering strategies are shown to be critical in boosting device performance for both solar cells and light‐emitting diodes.
Recent progress on perovskite surface and interface science of perovskite optoelectronic devices is summarized. The impact of various surface and interface defects on heterojunction energy barriers and carrier dynamics in devices is reviewed and discussed. Practical engineering methods to mitigate these defects at various interfaces in devices are also considered.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
2D graphitic carbon nitride (GCN) nanosheets have attracted tremendous attention in photocatalysis due to their many intriguing properties. However, the photocatalytic performance of GCN nanosheets ...is still restricted by the limited active sites and the serious aggregation during the photocatalytic process. Herein, a simple approach to produce holey GCN (HGCN) nanosheets with abundant in‐plane holes by thermally treating bulk GCN (BGCN) under an NH3 atmosphere is reported. These formed in‐plane holes not only endow GCN nanosheets with more exposed active edges and cross‐plane diffusion channels that greatly speed up mass and photogenerated charge transfer, but also provide numerous boundaries and thus decrease the aggregation. Compared to BGCN, the resultant HGCN has a much higher specific surface area of 196 m2 g−1, together with an enlarged bandgap of 2.95 eV. In addition, the HGCN is demonstrated to be self‐modified with carbon vacancies that make HGCN show much broader light absorption extending to the near‐infrared region, a higher donor density, and remarkably longer lifetime of charge carriers. As such, HGCN has a much higher photocatalytic hydrogen production rate of nearly 20 times the rate of BGCN.
An efficient etching process, thermal treatment of bulk graphitic carbon nitride under NH3 atmosphere, has been developed to synthesize holey graphitic carbon nitride (HGCN) nanosheets. The resultant HGCN exhibits significantly improved photocatalytic hydrogen production performance under visible light.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Perovskite light-emitting diodes (PeLEDs) have shown excellent performance in the green and near-infrared spectral regions, with high color purity, efficiency, and brightness. In order to shift the ...emission wavelength to the blue, compositional engineering (anion mixing) and quantum-confinement engineering (reduced-dimensionality) have been employed. Unfortunately, LED emission profiles shift with increasing driving voltages due to either phase separation or the coexistence of multiple crystal domains. Here we report color-stable sky-blue PeLEDs achieved by enhancing the phase monodispersity of quasi-2D perovskite thin films. We selected cation combinations that modulate the crystallization and layer thickness distribution of the domains. The perovskite films show a record photoluminescence quantum yield of 88% at 477 nm. The corresponding PeLEDs exhibit stable sky-blue emission under high operation voltages. A maximum luminance of 2480 cd m
at 490 nm is achieved, fully one order of magnitude higher than the previous record for quasi-2D blue PeLEDs.
An electroactive room‐temperature phosphorescence (RTP) polymer has been demonstrated based on a characteristic donor‐oxygen‐acceptor geometry. Compared with the donor–acceptor reference, the ...inserted oxygen atom between donor and acceptor can not only decrease hole‐electron orbital overlap to suppress the charge transfer fluorescence, but also strengthen spin‐orbital coupling effect to facilitate the intersystem crossing and subsequent phosphorescence channels. As a result, a significant RTP is observed in solid states under photo excitation. Most noticeably, the corresponding polymer light‐emitting diodes (PLEDs) reveal a dominant electrophosphorescence with a record‐high external quantum efficiency of 9.7 %. The performance goes well beyond the 5 % theoretical limit for typical fluors, opening a new door to the development of pure organic RTP polymers towards efficient PLEDs.
A donor‐oxygen‐acceptor geometry has been demonstrated for the design of electroactive pure organic room‐temperature phosphorescence polymers, whose PLEDs achieve a promising EQE of 9.7 %.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Transition metal oxides are capable of a wide range of work functions. This quality allows them to be used in many applications that involve charge transfer with adsorbed molecules, for example as ...heterogeneous catalysts, as charge‐injection layers in organic electronics, and as electrodes in fuel cells. Chemical and structural factors can alter transition‐metal oxide work functions, often making their work functions difficult to control. Little is known about the effects of the cation oxidation state and point defects on the oxide work function. It is necessary to understand how such chemical and structural factors affect work functions in order to controllably tune transition metal oxides for desired applications. Here, a correlation between the oxide work function and cation oxidation state is demonstrated. This correlation is attributed to the change in cation electronegativity with oxidation state. A model is presented that relates the work function to the oxygen deficiency for d0 oxides in the limit of dilute oxygen vacancies. It is proposed that the rapid initial decrease in work function, observed for d0 oxides, is caused by an increase in the density of donor‐like defect states. It is also shown that oxides tend to have decreased work functions near a metal/metal‐oxide interface as a consequence of the relationship between defects and work function. These insights provide guidelines for tuning transition metal oxide work functions.
The work functions of transition‐metal oxides are correlated with the oxidation states of their metal cations. Due to the relationship between electronegativity and oxidation state, reduced oxides tend to have lower work functions. The trends revealed provide guidelines for tuning transition metal oxide work functions.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Developing electrochemical energy storage devices with high energy–power densities, long cycling life, as well as low cost is of great significance. Sodium‐ion capacitors (NICs), with Na+ as ...carriers, are composed of a high capacity battery‐type electrode and a high rate capacitive electrode. However, unlike their lithium‐ion analogues, the research on NICs is still in its infancy. Rational material designs still need to be developed to meet the increasing requirements for NICs with superior energy–power performance and low cost. In the past few years, various materials have been explored to develop NICs with the merits of superior electrochemical performance, low cost, good stability, and environmental friendliness. Here, the material design strategies for sodium‐ion capacitors are summarized, with focus on cathode materials, anode materials, and electrolytes. The challenges and opportunities ahead for the future research on materials for NICs are also proposed.
Sodium‐ion capacitors (NICs) have attracted increasing attention due to their merits in combining the high energy densities of batteries, high power densities of supercapacitors, as well as the earth‐abundant reserves of sodium. Recent progresses on advanced materials for NICs are summarized. The challenges and opportunities ahead are also proposed.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
Machine learning (ML) is experiencing an immensely fascinating resurgence in a wide variety of fields. However, applying such powerful ML to construct subgrid interphase closures has been rarely ...reported. To this end, we develop two data‐driven ML strategies (i.e., artificial neural networks and eXtreme gradient boosting) to accurately predict filtered subgrid drag corrections using big data from highly resolved simulations of gas‐particle fluidization. Quantitative assessments of effects of various subgrid input markers on training prediction outputs are performed and three‐marker choice is demonstrated to be the optimal one for predicting the unseen test set. We then develop a parallel data loader to integrate this predictive ML model into a computational fluid dynamic (CFD) framework. Subsequent coarse‐grid simulations agree fairly well with experiments regarding the underlying hydrodynamics in bubbling and turbulent fluidized beds. The present ML approach provides easily extended ways to facilitate the development of predictive models for multiphase flows.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
The all‐inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these ...strategies—including strain and doping—are based on organic‐ligand‐capped perovskites, which prevent perovskites from forming the close‐packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic‐ligand‐exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI‐exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half‐lifetime of 10 h (luminance of 200 cd m−2) and an operating stability that is 6× higher than that of control devices.
Stable and efficient CsPbI3 perovskite light‐emitting diodes (PLEDs) are demonstrated by resurfacing perovskite with the aid of inorganic ligands (KI). The resurfaced perovskites show a 7× higher phase stability and higher thermal conductivity than in films with organic ligands. The PLEDs exhibit a record‐high external quantum efficiency (EQE) of ≈23 % and a 100‐fold improvement in the operating stability compared to previous EQE devices.
Full text
Available for:
BFBNIB, FZAB, GIS, IJS, KILJ, NLZOH, NUK, OILJ, SBCE, SBMB, UL, UM, UPUK
PDF
