Pressure-driven processes have come a long way since they were introduced. These processes, namely Ultra-Filtration (UF), Nano-Filtration (NF), and Reverse-Osmosis (RO), aim to enhance the efficiency ...of wastewater treatment, thereby aiming at a cleaner production. Membranes may be polymeric, ceramic, metallic, or organo-mineral, and the filtration techniques differ in pore size from dense to porous membrane. The applied pressure varies according to the method used. These are being utilized in many exciting applications in, for example, the food industry, the pharmaceutical industry, and wastewater treatment. This paper attempts to comprehensively review the principle behind the different pressure-driven membrane technologies and their use in the removal of heavy metals from wastewater. The transport mechanism has been elaborated, which helps in the predictive modeling of the membrane system. Fouling of the membrane is perhaps the only barrier to the emergence of membrane technology and its full acceptance. However, with the use of innovative techniques of fabrication, this can be overcome. This review is concluded with perspective recommendations that can be incorporated by researchers worldwide as a new problem statement for their work.
Bioactive peptides (BPs) released by proteases from different food protein sources are often served as antioxidants in food applications. This study aims to investigate 11 BPs derived from fish and ...egg white as potential natural antioxidants by antioxidant activity assays. The kinetic activity of the BPs against xanthine oxidase (XOD) and tyrosinase was also analyzed. The antioxidative capacity of the BPs indicated that VWWW (VW4, mackerel meat), followed by IRW (IW3, egg white) and VKAGFAWTANQQLS (VS14, tuna backbone protein), possessed the highest antioxidant activity in 1,1-diphenyl-2-picrylhydrazyl radical (DPPH), 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) and reducing power (RP) assays. Both the free-radical scavenging score predicted from the AnOxPePred algorithm and the DPPH, ABTS and RP results indicated that VW4 was the best antioxidant. Furthermore, the XOD and tyrosinase inhibition by three selected peptides exhibited competitive patterns of effective inhibition. The half maximal inhibitory concentrations (IC50) of the peptides for XOD inhibition were 5.310, 3.935, and 1.804 mM for VW4, IW3, and VS14, respectively, and they could serve as competitive natural XOD inhibitors. The IC50 of the peptides for tyrosinase inhibition were 1.254, 2.895, and 0.595 mM for VW4, IW3, and VS14, respectively. Overall, VW4, IW3, and VS14 are potential antioxidants and natural XOD inhibitors for preventing milk-fat oxidation, and anti-browning sources for inhibiting food-derived tyrosinase oxidation.
Granular materials are abundant in nature, and in most industries, either the initial constituents or final products are in granular form during a production or processing stage. Industrial processes ...and equipment for the handling of bulk solids can only be improved if we can understand, model and predict the material behaviour. The discrete element method (DEM) is a numerical tool well-suited for this purpose and has been used by researchers and engineers to analyse various industrial applications and processes. However, before any bulk scale modelling can be undertaken, the input parameters must be carefully calibrated to obtain accurate results. The calibration of parameter values for non-cohesive materials has reached a level of maturity; however, the calibration of cohesive materials requires more research. This paper details the most prevalent contact models used to model cohesive materials—presented in a consistent notation. Moreover, the significant differences between the models are highlighted to provide a reference for engineers and researchers to select the most appropriate model for a specific application. Finally, a critical review of calibration experiments and methodologies often used for cohesive materials is also presented. This provides a solid basis for DEM practitioners to select the most appropriate calibration methodology for their application and for researchers to extend the current state-of-the-art practices.
The adsorption potential of acid activated carbon prepared from leaves of Juniperus procera to remove Pb(II) and Cr(VI) toxic ions from aqueous solutions was investigated. The effects of solution pH, ...adsorbent mass, contact time, initial ion concentration and temperature on the biosorption process were studied, and the optimum conditions were determined. Moreover, Langmuir, Freundlich, Temkin and Dubinin–Radushkevich adsorption isotherm models were applied to analyze adsorption data. Thermodynamic parameters for the adsorption processes were calculated. Adsorption was found to be a spontaneous and endothermic process. In addition, kinetic studies revealed a pseudo-first order kinetics biosorption process. The obtained results suggest that acid activated Juniperus procera leaves powder can be used as a cheap, efficient and environmentally friendly adsorbent material with high removal efficiency up to 98% for Pb(II) and 96% for Cr(VI) at 0.80 and 1.00 g/100 mL, respectively. The duration of the process was 100 min and 120 min for Pb(II) and Cr(VI) ions, respectively. The morphology of the of prepared activated carbon was investigated by scanning electron microscope (SEM).
Heavy metal pollution of aquatic media has grown significantly over the past few decades. Therefore, a number of physical, chemical, biological, and electrochemical technologies are being employed to ...tackle this problem. However, they possess various inescapable shortcomings curbing their utilization at a commercial scale. In this regard, nanotechnology has provided efficient and cost-effective solutions for the extraction of heavy metals from water. This review will provide a detailed overview on the efficiency and applicability of various adsorbents, i.e., carbon nanotubes, graphene, silica, zero-valent iron, and magnetic nanoparticles for scavenging metallic ions. These nanoparticles exhibit potential to be used in extracting a variety of toxic metals. Recently, nanomaterial-assisted bioelectrochemical removal of heavy metals has also emerged. To that end, various nanoparticle-based electrodes are being developed, offering more efficient, cost-effective, ecofriendly, and sustainable options. In addition, the promising perspectives of nanomaterials in environmental applications are also discussed in this paper and potential directions for future works are suggested.
Wheat pasta is one of the most important cereal products and is becoming increasingly popular worldwide because of its convenience, simple formulation, long shelf life, and high energetic value. ...Wheat pasta is usually obtained from refined flour rich in carbohydrates but with low content of phytochemicals, micronutrients, and fibre. The increased demand of consumers for healthy foods has generated interest among both researchers and food producers in developing functional food products. This review showcases the current trends in pasta fortification. Changes in the nutritional value, cooking quality, sensory attributes, and antioxidant properties of durum and common wheat pasta enriched with both plant and animal raw materials are discussed.
Saline water treatment has become increasingly important for drinking water supplies. The aim of this study was to evaluate the ability of the electrocoagulation (EC) process with combined aluminum ...electrodes in removing various types of salt from water samples collected at Sawa Lake, Al-Muthanna, Iraq. The targeted types of salt include total dissolved solids (TDS), chloride salt (Cl−), bromine (Br−), and sulphate (SO42−). A bench scale consisting of combined EC configurations with static electrodes was employed under combined electrical connections. The effect of the six variables factors, such as applied current density (I), reaction time (RT), pH, temperature (T), stirring speed (Mrpm) and inter electrode distance (IED) were observed to achieve a higher removal of TDS, Cl−, Br− and SO42−. Initial results showed the following optimum operating conditions: I = 2 mA/cm2, RT = 80 min, pH = 8, T = 25 °C, IED = 1 cm and Mrpm = 500. The maximum removal efficiency of TDS, Cl−, Br− and SO42− were 91%, 93%, 92% and 90%, respectively. It can be concluded that the EC method applied in the present study was effective to removing salts from lake water.
The rated power of wind turbines has consistently enlarged as large installations can reduce energy production costs. Multi-megawatt wind turbines are frequently used in offshore and onshore ...facilities, and today is possible to find wind turbines rated over 15 MW. New developments in generators and power converters for multi-MW wind turbines are needed, as the trend toward upscaling the dimensions of wind turbines is expected to continue. Therefore, this paper provides a detailed review of commercially available and recently proposed multi-MW wind turbine generators and power converters. Furthermore, comparative analyses indicate the advantages and disadvantages of commercially available and promising technologies for generators and power converters at the multi-MW target.
The serious environmental issues associated with CO2 emissions have triggered the search for energy efficient processes and CO2 capture technologies to control the amount of gas released into the ...atmosphere. One of the suitable techniques is CO2 adsorption using functionalized sorbents. In this study, a functionalized activated carbon (AC) material was developed via the wet impregnation technique. The AC was synthesized from a rubber seed shell (RSS) precursor using chemical activation and was later impregnated with different ratios of bmpyTf2N ionic liquid (IL). The AC was successfully functionalized with IL as confirmed by FTIR and Raman spectroscopy analyses. Incorporation of IL resulted in a reduction in the surface area and total pore volume of the parent adsorbent. Bare AC showed the largest SBET value of 683 m2/g, while AC functionalized with the maximum amount of IL showed 14 m2/g. A comparative analysis of CO2 adsorption data revealed that CO2 adsorption performance of AC is majorly affected by surface area and a pore-clogging effect. Temperature has a positive impact on the CO2 adsorption capacity of functionalized AC due to better dispersion of IL at higher temperatures. The CO2 adsorption capacity of AC (30) increased from 1.124 mmol/g at 25 °C to 1.714 mmol/g at 40 °C.
With the increase in demand for plastic use, waste plastic (WP) management remains a challenge in the contemporary world due to the lack of sustainable efforts to tackle it. The increment in WPs is ...proportional to man’s demand and use of plastics, and these come along with environmental challenges. This increase in WPs, and the resulting environmental consequences are mainly due to the characteristic biodegradation properties of plastics. Landfilling, pollution, groundwater contamination, incineration, and blockage of drainages are common environmental challenges associated with WPs. The bulk of these WPs constitutes polyethene (PE), polyethene terephthalate (PET) and polystyrene (PS). Pyrolysis is an eco-friendly thermo-chemical waste plastic treatment solution for valuable product recovery, preferred over landfilling and incineration solutions. In this extensive review, a critical investigation on waste plastic catalytic pyrolysis (WPCP) is performed, including catalyst and non-catalyst applications to sustainably tackle WP management. Current catalysis techniques are revealed, and some comparisons are made where necessary. Common pyrolytic products and common shortcomings and errors related to WP catalysis were also identified. The benefits of catalysts and their applications to augment and optimise thermal pyrolysis are emphasised. With all these findings, and more, this paper provides reassurance on the significance of catalysis to industrial-scale applications and products and supports related WPCP research work concerning the environment and other beneficiaries.
PDF