Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the ...journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.
The design of curved structural building envelopes is challenging as it requires to account for a wide variety of constraints. In particular, the shape must be mechanically efficient, fabricable, and ...fit the site geometry. This article shows how a family of surfaces, called isotropic Linear Weingarten surfaces (nicknamed i-liwien), may fulfil all these constraints together, and be used as an intuitive design tool. We start by showing that these shapes are funicular for a uniform vertical load, and that principal stress lines form a conjugate net. This allows in particular for the design of gridshells with planar faces and low bending moments or for the design of self-stressed cable nets cladded by planar glass panels. We then propose a discrete model based on recent advances in discrete differential geometry. We use this model to propose a generation method from boundary curves with two additional control parameters. We demonstrate the shape potential on several examples. The application to shells, membranes, cable-nets and gridshells are discussed.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at ...increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of nature-based coastal protection which aim to be sustainable, effective and adaptable. An example of a nature-based solution is a dynamic cobble berm revetment: a berm constructed from cobble and other gravel sediments at the high tide wave runup limit. These structures limit wave excursion protecting the hinterland from inundation, stabilise the upper beach and adapt to changes in water level. Recent experiments and field applications have shown the suitability of these structures for coastal protection, however many of the processes and design considerations are poorly understood. This study directly compares two prototype scale laboratory experiments which tested dynamic cobble berm revetments constructed with approximately the same geometry but differing gravel characteristics; well-sorted rounded gravel (DynaRev1) and poorly-sorted angular gravel (DynaRev2). In both cases the structures were tested using identical wave forcing including incrementally increasing water level and erosive wave conditions. The results presented in this paper demonstrate that both designs responded to changing water level and wave conditions by approaching a dynamically stable state, where individual gravel is mobilised under wave action but the geometry remains approximately constant. Further, both structures acted to reduce swash excursions compared to a pure sand beach. However, their morphological behaviour is response to wave action varied considerably. Once overtopping of the designed crest occurred, the poorly-sorted revetment developed a peaked crest which grew in elevation as the water level or wave height increased, further limited overtopping. By comparison, the well-sorted revetment was characterised by a larger volume of submerged gravel and a lower elevation flat crest which responded less well to changes in conditions. This occurred due to two processes: (1) for the poorly-sorted case, gravel sorting processes moved small to medium gravel material (D) to the crest and (2) the angular nature of the poorly-sorted gravel material promoted increased interlocking. Both of these processes led to a gravel matrix that is more resistant to wave action and gravitational effects. Both revetments experienced some sinking due to sand erosion beneath the front slope. The rate of sinking for the well-sorted case was larger and continued throughout due to the large pore spaces within the gravel matrix. For the poorly sorted revetment in DynaRev2, sand erosion ceased after approximately 28 h due to the development of a filter layer of small gravel at the sand-gravel interface reducing porosity at this location, hence a larger volume of sand was preserved beneath the structure. Both designs present a low-cost and effective solution for protecting sandy coastlines but from an engineering viewpoint it appears better to avoid well-sorted gravel material and greater gravel angularity has been seen to increase crest stability.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
Experiments in which heated nitrogen/steam mixtures are passed through model cracks in concrete with thermocouples embedded along the inner surfaces of the cracks provide insights about the ...thermodynamic processes occurring within them. The thermal behaviour that is observed results from several interlinked processes that influence one another and the resulting transfer of nitrogen, steam, water and heat. By correlating the temperatures measured at different times and positions within cracks with different separations, one can observe how the flow is modified by the formation of condensation. When pure nitrogen is passed through the cracks, only a small amount of water evaporates from the concrete and partial obstruction of the cracks by condensed water only occurs in the cracks with small separations (∼30 µm). As the proportion of steam in the mixture is increased, the thermal fluctuations caused by the formation of condensation become more important and evolve over time as the concrete is heated.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
The present volume contains the Proceedings of the 14th International Conference on Hydroinformatics – HIC 2022, held from the 4th to the 8th of July 2022 in Bucharest, Romania. The conference was ...jointly organised by the Technical University of Civil Engineering Bucharest and the University “Politehnica” of Bucharest.
Abstract Structural failure of concrete buildings on fire and complete destruction of the monolithic refractory lining during their drying stage are dangerous examples of the effect of explosive ...spalling on partially saturated porous media. Several observations in both cases indicated the presence of moisture accumulation ahead of the drying front, which are in tune with the most common theories on the explosive spalling of concrete. Previous studies have shown evidence of the existence of this phenomenon, however, they were biased by artifacts and experimental limitations (such as the beam hardening effect and changes in the microstructure of the material due to the presence of pressure and temperature sensors). In the current work, rapid neutron tomography was used to investigate the in‐operando drying behavior of a high‐alumina refractory castable, proposing a novel experimental layout aimed at a truly one‐dimensional drying front. This setup provided more realistic boundary conditions, such as the behavior of a larger wall heated from one of its sides, while also preventing some nonphysical artifacts (notably beam hardening). By eliminating these aspects, a direct proof that moisture accumulates ahead of the drying front was obtained. This work also lays the basis for further studies focusing on the response sensitivity analysis to boundary conditions and other parameters (e.g., heating rates and properties of the sample related to the moisture clog formation), as well as useful data for the validation and characterization stages of numerical models of partially saturated porous media.
Full text
Available for:
BFBNIB, DOBA, FZAB, GIS, IJS, IZUM, KILJ, NLZOH, NUK, OILJ, PILJ, PNG, SAZU, SBCE, SBMB, UILJ, UKNU, UL, UM, UPUK
