Road traffic is one of the main sources of particulate matter in the atmosphere. Despite its importance, there are significant challenges in quantitative evaluation of its contribution to airborne ...concentrations. This article first reviews the nature of the particle emissions from road vehicles including both exhaust and non-exhaust (abrasion and re-suspension sources). It then briefly reviews the various methods available for quantification of the road traffic contribution. This includes tunnel/roadway measurements, twin site studies, use of vehicle-specific tracers and other methods. Finally, the application of receptor modelling methods is briefly described. Based on the review, it can be concluded that while traffic emissions continue to contribute substantially to primary PM emissions in urban areas, quantitative knowledge of the contribution, especially of non-exhaust emissions to PM concentrations remain inadequate.
•Road traffic contributes emissions from exhaust, abrasion and re-suspension sources.•Chemical and physical properties of the emitted particles are described.•Available methods for quantification of traffic-derived concentrations are reviewed.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Shipping emissions are currently increasing and will most likely continue to do so in the future due to the increase of global-scale trade. Ship emissions have the potential to contribute to air ...quality degradation in coastal areas, in addition to contributing to global air pollution. With the aim to quantify the impacts of shipping emissions on urban air quality in coastal areas in Europe, an in depth literature review was carried out focussing on particulate matter and gaseous pollutants but also reviewing the main chemical tracers of shipping emissions, the particle size distribution of ship-derived particulates and their contributions to population exposure and atmospheric deposition. Mitigation strategies were also addressed. In European coastal areas, shipping emissions contribute with 1–7% of ambient air PM10 levels, 1–14% of PM2.5, and at least 11% of PM1. Contributions from shipping to ambient NO2 levels range between 7 and 24%, with the highest values being recorded in the Netherlands and Denmark. Impacts from shipping emissions on SO2 concentrations were reported for Sweden and Spain. Shipping emissions impact not only the levels and composition of particulate and gaseous pollutants, but may also enhance new particle formation processes in urban areas.
Display omitted
•Shipping contributions to European coastal air quality degradation are reviewed.•Maritime transport is a significant and increasing source of air pollutants.•Chemical tracers are available for use as markers in receptor models.•Mitigation strategies are effective and should be implemented on EU-scale.•Research gaps are identified.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The temporal variation of trace component emissions from the working surface of a landfill in Beijing was investigated. Specific days in a year were selected as representatives for all four seasons. ...Different chemical species were quantified in all four seasons with the following average concentrations: spring: 41 compounds, 2482.6 μg m−3; summer: 59 compounds, 4512.6 μg m−3; fall: 66 compounds, 2438.4 μg m−3; and winter: 54 compounds, 2901 μg m−3. The detected compounds included sulfur compounds, oxygenated compounds, aromatics, hydrocarbons, halogenated compounds, and terpenes. Oxygenated compounds were the most abundant compound in most samples. Isobutane, ethyl alcohol, limonene, butane, toluene, and trichlorofluoromethane were recognized as the most abundant compounds on the working surface throughout the year. This study would bring new light in assessing the particle pollution in urban areas and the effect of trace components on landfill odor.
•Temporal variations of trace components emission in a landfill were investigated.•Highest concentrations appeared in summer; and most species were found in autumn.•Oxygenated compounds were the most abundant compounds on the working surface.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
A two-step method was developed to extract microplastics from sediments. First, 1 kg sediments was pre-extracted using the air-induced overflow (AIO) method, based on fluidisation in a sodium ...chloride (NaCl) solution. The original sediment mass was reduced by up to 80%. As a consequence, it was possible to reduce the volume of sodium iodide (NaI) solution used for the subsequent flotation step. Recoveries of the whole procedure for polyethylene, polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), polystyrene and polyurethane with sizes of approximately 1 mm were between 91 and 99%. After being stored for one week in a 35% H2O2 solution, 92% of selected biogenic material had dissolved completely or had lost its colour, whereas the tested polymers were resistant. Microplastics were extracted from three sediment samples collected from the North Sea island Norderney. Using pyrolysis gas chromatography/mass spectrometry, these microplastics were identified as PP, PVC and PET.
A two-step extraction technique enabled microplastics to be extracted from sediments at an affordable price by decreasing the sediment mass in the first step.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Civil aviation is fast-growing (about +5% every year), mainly driven by the developing economies and globalisation. Its impact on the environment is heavily debated, particularly in relation to ...climate forcing attributed to emissions at cruising altitudes and the noise and the deterioration of air quality at ground-level due to airport operations. This latter environmental issue is of particular interest to the scientific community and policymakers, especially in relation to the breach of limit and target values for many air pollutants, mainly nitrogen oxides and particulate matter, near the busiest airports and the resulting consequences for public health. Despite the increased attention given to aircraft emissions at ground-level and air pollution in the vicinity of airports, many research gaps remain. Sources relevant to air quality include not only engine exhaust and non-exhaust emissions from aircraft, but also emissions from the units providing power to the aircraft on the ground, the traffic due to the airport ground service, maintenance work, heating facilities, fugitive vapours from refuelling operations, kitchens and restaurants for passengers and operators, intermodal transportation systems, and road traffic for transporting people and goods in and out to the airport. Many of these sources have received inadequate attention, despite their high potential for impact on air quality. This review aims to summarise the state-of-the-art research on aircraft and airport emissions and attempts to synthesise the results of studies that have addressed this issue. It also aims to describe the key characteristics of pollution, the impacts upon global and local air quality and to address the future potential of research by highlighting research needs.
•Aviation is globally growing (+5% y−1) mainly driven by developing countries.•Airport operations cause an increase in ground-level pollution.•Chemical and physical properties of the emitted gases and particles are reviewed.•An overview of other additional sources within airports is provided.•Future research needs on aircraft emissions are highlighted.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Plastic debris <1 mm (defined here as microplastic) is accumulating in marine habitats. Ingestion of microplastic provides a potential pathway for the transfer of pollutants, monomers, and ...plastic-additives to organisms with uncertain consequences for their health. Here, we show that microplastic contaminates the shorelines at 18 sites worldwide representing six continents from the poles to the equator, with more material in densely populated areas, but no clear relationship between the abundance of miocroplastics and the mean size-distribution of natural particulates. An important source of microplastic appears to be through sewage contaminated by fibers from washing clothes. Forensic evaluation of microplastic from sediments showed that the proportions of polyester and acrylic fibers used in clothing resembled those found in habitats that receive sewage-discharges and sewage-effluent itself. Experiments sampling wastewater from domestic washing machines demonstrated that a single garment can produce >1900 fibers per wash. This suggests that a large proportion of microplastic fibers found in the marine environment may be derived from sewage as a consequence of washing of clothes. As the human population grows and people use more synthetic textiles, contamination of habitats and animals by microplastic is likely to increase.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Several classes of polyfluorinated chemicals that are potential precursors to the perfluorinated carboxylates and sulfonates are present in aqueous film-forming foams (AFFF). To assess the ...persistence of these AFFF-derived precursors, groundwater, soil, and aquifer solids were obtained in 2011 from an unlined firefighter training area at a U.S. Air Force Base where AFFF was regularly used between 1970 and 1990. To measure the total concentration of perfluorinated carboxylate and sulfonate precursors in archived AFFF formulations and AFFF-impacted environmental samples, a previously developed assay that uses hydroxyl radical to oxidize precursors to perfluorinated carboxylates was adapted for these media. This assay was employed along with direct measurement of 22 precursors found in AFFF and a suite of other poly- and perfluoroalkyl substances (PFASs). On a molar basis, precursors accounted for 41–100% of the total concentration of PFASs in archived AFFF formulations. In the training area, precursors measured by the oxidation assay accounted for an average of 23% and 28% of total PFASs (i.e., precursors and perfluorinated carboxylates and sulfonates) in groundwater and solids samples, respectively. One precursor in AFFF, perfluorohexane sulfonamide amine, was observed on several highly contaminated soil and aquifer solids samples, but no other precursors present in AFFF formulations were detected in any samples at this field site. Suspected intermediate transformation products of precursors in AFFF that were directly measured accounted for approximately half of the total precursor concentration in samples from the training site. The fraction of PFASs consisting of perfluorinated carboxylates and sulfonates was greater in groundwater and solid samples than in any archived AFFF formulations, suggesting that much of the mass of precursors released at the site was converted to perfluorinated carboxylates and sulfonates. The precursors that have persisted at this site may generate significant amounts of additional perfluorinated carboxylates and sulfonates upon remediation of contaminated groundwater or aquifer solids.
Full text
Available for:
IJS, KILJ, NUK, PNG, UL, UM
Microplastics are small plastic particles (<1 mm) originating from the degradation of larger plastic debris. These microplastics have been accumulating in the marine environment for decades and have ...been detected throughout the water column and in sublittoral and beach sediments worldwide. However, up to now, it has never been established whether microplastic presence in sediments is limited to accumulation hot spots such as the continental shelf, or whether they are also present in deep-sea sediments. Here we show, for the first time ever, that microplastics have indeed reached the most remote of marine environments: the deep sea. We found plastic particles sized in the micrometre range in deep-sea sediments collected at four locations representing different deep-sea habitats ranging in depth from 1100 to 5000 m. Our results demonstrate that microplastic pollution has spread throughout the world's seas and oceans, into the remote and largely unknown deep sea.
•Sediment from 4 deep sea locations was analysed for the presence of microplastics.•An average abundance of up to 1 microplastic per 25 cm3 was observed.•The depths from where these microplastics were recovered range from 1176 to 4843 m.•The sizes of the particles range from 75 to 161 μm at their largest cross-section.
Here, we demonstrate that microplastics have invaded the marine environment to an extent that they appear to even be present in the remote deep sea.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
Pollutant emissions need to be accurately estimated to ensure that air quality plans are designed and implemented appropriately. Emission factors (EFs) are empirical functional relations between ...pollutant emissions and the activity that causes them. In this review article, the techniques used to measure road vehicle emissions are examined in relation to the development of EFs found in emission models used to produce emission inventories. The emission measurement techniques covered include those most widely used for road vehicle emissions data collection, namely chassis and engine dynamometer measurements, remote sensing, road tunnel studies and portable emission measurements systems (PEMS). The main advantages and disadvantages of each method with regards to emissions modelling are presented. A review of the ways in which EFs may be derived from test data is also performed, with a clear distinction between data obtained under controlled conditions (engine and chassis dynamometer measurements using standard driving cycles) and measurements under real-world operation.
► The accuracy of road emission models is directly linked to the quality of their emission factors. ► Road vehicles have a large natural variability in their emission profiles. ► Emission factors may have different resolution according to their intended use. ► Emission modellers should combine laboratory data with real-world measurements.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
The role of urban carbon dioxide (CO2) emissions has attracted city authorities' attention. Several entities face challenges when developing inventory method for local communities, due to limited ...data. This study proposes a top-down method to estimate CO2 emissions at an urban scale, using nighttime light imagery and statistical energy data. We find that nighttime light imagery is appropriate in CO2 estimations at an urban scale. The proposed method is particularly significant for the developing countries, of which CO2 emissions increase rapidly but lack in energy data at an urban scale. It also contains some limitations due to the inherent shortcomings of the data sources and methodological errors. It has very limited value when applying in urban areas with rare population. A case study is implemented in urban China. The results show that the share of urban emissions increases over the period of 1995–2010. Meanwhile, per capita CO2 emissions in China continuously grow, the values of which are much higher than the national averages. In a spatiotemporal perspective, per capita CO2 emissions in eastern coastal China are lower than that in inland China. These results have significant implications for local authorities to guide their policies in carbon reduction and climate change.
•We develop a top-down method to estimate the CO2 emissions at an urban scale.•The proposed method is particularly significant for the developing counties.•This method has limited value in urban areas with rare population.•Both the share of urban CO2 emissions and per capita emissions in China have increased.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UL, UM, UPCLJ, UPUK
PDF
