Abstract
The important part for human survival is air the and growing pollution in the environment is a major concern for mankind therefore there is a need for a device is that can remove the gaseous ...components in the air molecules. With the use of thermoplastic elements, gas-liquid absorption can occur. The concept of scrubber for the absorption of gases was introduced in late 1980 and with the growth of modern techniques, the gas liquids absorption and phase change is been studied for a very long time. A packed column is process equipment, and it is widely used in industries that produce toxic elements. Bed scrubber washing technique for removal of gaseous contaminants to a large extent bus stop with the use of a microcontroller for monitoring the emissions the basic idea of installing this machine in the end or environment for residential and commercial use is a need of the hour. The work relates to the design and performance of the back scrubber and the study of the practical approach results by using it in an indoor environment. The use of IoT in this process is enhancing its quality and we are adding a step towards optimizing the air pollution standards. As the government has taken a lot of efforts for halting the growth of air contaminants by implementing some loss on engine combustion so the work is innovation in the field of air pollution and control.
This article describes the design of a data system to integrate energy conversion from photovoltaic measurements connected to the power grid. The software used is visual studio, while the hardware ...uses polycrystalline photovoltaic (PV) with a capacity of 2.08 kW and several sensors that have been integrated into Arduino. Parameter data in measuring the performance of this PV system consists of temperature and humidity sensors to measure the panel surface, direct current (DC) current sensor, DC voltage sensor. To measure the current and voltage sourced from the electricity network, the module (PZEM-004T) is used. Measurements are designed using a graphical user interface (GUI) on a Visual Studio application that has been interfaced through Arduino programming. The data output on the sensor measurement will simultaneously record the circuit that has been connected to the solar panel and then display it visually in the form of tables and graphs in real time with a delay of 1 minute. The results of PV on grid measurements in sunny weather conditions obtained the maximum value of all measurements with a DC voltage of 221 V, while for an alternating current (AC) voltage of 231.60 V, the DC value reached 1827.17 W while the AC power was 1681 W.
Full text
Available for:
FFLJ, IZUM, KILJ, NUK, ODKLJ, PILJ, PNG, SAZU, UL, UM, UPUK
Robotics technology is very useful for the lives of many people today. Almost all aspects of his life utilize robotics technology according to the required field. The development of robotics ...technology has become a higher quality of human life. Perhaps robotics are still less popular among the general public who still thinks robotics are humanoid robots (robots or human machines). Robotics has been widely implemented in the real world ranging from the fields of industry, medicine, entertainment, security, to household appliances. In the field of security, robotics has an important role. As the robot principle itself is tireless and has little tolerance, the product in robotics in the security field can be a very useful tool. In addition to facilitate human insecurity, robotics products can also facilitate human in various jobs, such as in the locking doors or walls of anyone who already exists. The development of robotics is in line with the development of computer vision which is increasing its application in everyday life. With this research, is expected to improve security and comfort in the security room. The design of this system using electronic door locks, open source OpenCV and webcam as a unit component.
Renewable energy is a reliable and practical option for generating electricity and is considered one of the key ways to reduce environmental impact. There have been concentrated efforts devoted to ...next-generation technology to enhance performance, reliability and future growth of wind energy. However, there is always been concern about wide and bulky horizontal axes of wind turbines. Recent developments in wind turbine technology, particularly in the case of vertical axis wind turbines have shown that they are more adaptable to utility-scale power plants. As the energy generates from wind flow in both directions, we used this concept to model a novel hybrid wind turbine to demonstrate energy harvesting viability in a controlled way entirely from the moving vehicles on highways, with a three-bladed wind turbine and a solar tracking system. The hybrid wind turbine provided more energy and better efficiency in comparison to traditional wind turbines on the highways.
Full text
Available for:
GEOZS, IJS, IMTLJ, KILJ, KISLJ, NLZOH, NUK, OILJ, PNG, SAZU, SBCE, SBJE, UILJ, UL, UM, UPCLJ, UPUK, ZAGLJ, ZRSKP
People in general have a desire to live a healthy life. One way to keep health is by consuming herbal drinks, one of them is known as jamu. Jamu which is commonly found is "jamu gendong" which is a ...home-based herbal product that is marketed in the form of liquid in the bottle. When buying jamu, the seller will mix various types of jamu by pouring jamu from each bottle into a glass according to the buyer's request. However, mixing several types of jamu is carried out using the seller estimate, so the dosage of several types of jamu to the glass will vary according to the pouring. The purpose of this research is to make a arduino Mega based automatic jamu beverage mixing system. This system uses an LDR sensor to detect the presence of a glass with a resistance value read by an LDR sensor is > 500 ohm and a DC motor can move by the stirrer. The selection of the jamu menu's is done by pressing the keypad button from the code '1' to the code '8'. After the menu is selected, the jamu will flow to the glass and the volume of jamu will be calculated using a water flow sensor that uses multiplier values. For the volume of 150 mL is used to multiplie factor 3.7 , for the volume of 100 mL is used to multiplie factor 2.9 , and for the volume of 50 mL is used to multiplie factor 1.2.
The aim of the research is to design the tools used to detect and determine blood type. Blood and rhesus group detection can usually be done manually through a process of testing red blood cells with ...antisera (serum) to see if blood that has been given antisera (serum) occurs agglutination (agglutination) or non-agglutination (not clot). In this study, blood type and rhesus detection was designed electronically using ABO blood type and Rhesus system. It is designed using three pairs of light sensor, LED sensor as transmitter and Photodioda as receiver, comparator circuit and arduino mega 2560 microcontroller. Agglutination sensor or non-agglutination reaction of blood sample mixed with antisera. Next, it sends the voltage to be conditioned by the comparator circuit then sent to the microcontroller for processing and the blood type and rhesus readings will be displayed on the LCD screen.
The fossil fuel resources are being gradually depleted and used them cause pollution and global warming due to greenhouse gases emitted. ...the trend towards an alternative to fossil fuels has ...gradually begun to be replaced by sources of renewable energy. The sun position changing continuously that make sun light and fixed surface panel no more perpendicular to each other by means the angle between them continuous changing which effects on electrical power output and in this case power density on fixed PV surface panel is lower than that of the light sun. ...the fixed PV panels cannot operate with same efficiency for a long time because of this situation 6-8. The optimal power obtained when using tracking case as clear in the results, that is return to effect algorithm schedule on system performance additional to that the system proposed also provide the best rate data transfer and regular distribution. 2.Sun's Position Determination The position of object for exact location relative to sun in sky can be determined by several established equations. Solar Panel Solar energy is a group of photovoltaic cells that produce electrical energy from sun light energy and convert the received light energy from sun into electrical energy.
Full text
Available for:
FFLJ, IZUM, KILJ, NUK, ODKLJ, PILJ, PNG, SAZU, UL, UM, UPUK
This publication discusses the Internet of things (IoT) technology. From simple to complex, programming of microcontrollers is described: the connection between the relay and the remote control. ...Russian and Indonesian scientists have joined forces to accelerate the use of the Internet of things. The project stages are described: design, testing, communication, and report generation. The basic scheme of development (algorithm) is proposed. The technology describes the programming of the Arduino UNO microcontroller. The socio-economic justification of the project is given. The result of the lowest price on the online market is shown. Versions of the IPv4 Protocol are described. An additional IPv6 Protocol that provides the ability for each inhabitant of the Earth to use more than 300 million IP addresses of the Internet of things. Internet of things (IoT) technology, where every object in the physical world that participates in the Internet of things has an ID. It is determined that the Internet of things requires wireless networks and alternative energy resources. For Internet of things (IoT) technology, it is important that cloud services have more bandwidth to respond to sensor signals in a timely manner. There is a need to develop Executive devices. This publication contains data for standardizing One M2M processes. It describes the new world of the future-a seamless interaction of gadgets that is designed to transform the way we all work in the future. Relevance of this, the work topic is to introduce innovative practices with extension of the system functional. It is customization and creation of industry solutions. The implementation on a making smart house become one of the main purpose. The newest technology industry made the new particle of continuity of daily use. Creating people on idea to make work more simple and remotely. This technology is Internet of Things that would make the daily activity get more easily. This work is intend to made a smart house with in the network of Internet of Things. In this implementation, the provider of Internet of Things technology is Arduino Uno.
Full text
Available for:
IZUM, KILJ, NUK, PILJ, PNG, SAZU, UL, UM, UPUK
In the process of construction work, operators need accuracy in the process of finishing land leveling works such as road highway building, land reclamation, large commercial, landfill installation, ...so as to increase productivity. Therefore, the purpose of this research is to manufacture and implement a ground leveling finishing tool using Arduino IDE software and Atmega 328 microcontroller on the Dozer D3K Caterpillar heavy equipment unit. The placement of a series of components from the Grade Monitoring Assist includes the ultrasonic sensor on the lift cylinder, gyro and accelerometer at the top center of the blade, as well as a display that displays the results of parameter readings. Connections between components in Grade Monitoring Assist are cables that integrate all installed components. The results of testing the movement of the blade up and down position to get an accuracy value of 97.30% and an error of 2.70%. While the movement of the blade down position has an accuracy value of 96.50% and an error of 2.50%. And Tests by moving the blade according to the implement movement angle at the maximum blade angle position (either side) with an average error value of 1.48o, cutting ditches (angle V) an average error value of 0.676o
PDF
